PRECISION MATTHEWS PM-1440GT

모델
PM-1440GT
가격
$11,599.99 USD
  • 사양
    사양을 미터법으로 변환
    스윙
    14"
    중심
    40"
    스핀들 보어
    2"
    동력
    2 hp
    분당 회전속도
    2,000 RPM
    슬라이드 위 스윙
    8"
    제원
    24x70
    무게
    1750
  • 제품 개요

    HIGHLIGHTS OF THIS MACHINE

    Extremely High Quality Lathe, meant for very high precision work, and suitable for every day use. Perfect for the professional user who is looking for the best available
    100% Made in Taiwan, no shortcuts taken, built to a very high level of quality
    Available in either Single or 3 Phase power, to match the user’s needs
    Priced very, very reasonably when compared with other similar high quality models – and no one out there has the 2″ Spindle bore in a machine from Taiwan. Compare Carefully. No one out there even comes close
    Excellent machine for Gunsmithing use, Very Short Spindle, Ultra High Precision
    High Precision, Hardened and Ground gears throughout headstock, which leads to extremely smooth and quiet running for a geared head lathe
    Leadscrews Are True Inch Pitch Screws (Not Metric Conversions Like Many), 10 Threads Per Inch (.100” Per Turn)
    Backed by an industry leading 5 year warranty

    STANDARD/INCLUDED ACCESSORIES:

    Complete Base with Chip Tray
    L.E.D. Work Light
    NACHI (Japan) Spindle bearings, with +/- .0001″ Max Spindle Runout
    D1-5 Quick Change Spindle Mount
    Back Splash Guard
    Reducing Sleeve for Headstock Center
    4 Way Tool Post
    Headstock Dead Center
    Tail Stock Dead Center
    Thread Chasing Dial (4” Travel Thread Dial, for easier inch thread cutting)
    Feed Rod Clutch (To prevent overloading and using carriage stops)
    Everything Needed for listed Inch and Metric Thread Pitches
    Steady Rest
    Follow Rest
    Coolant System
    Foot Brake
    Belt Cover Interlock Switch
    D1-5 Face Plate (12″ Diameter)
    5 Year Warranty

    MAIN FEATURES:

    Highest Quality Lathe, Made in TAIWAN
    Large 2” Spindle Bore clear through spindle for through-
    headstock work
    Short Spindle Length, only 15-1/2″, perfect for gunsmithing
    work
    Power feed on Carriage, and Cross Slide, both left and right,
    and in and out, for both turning and facing operations with
    automatic feed. Allows for the best surface finish in all
    directions.
    Induction Hardened and Precision Ground Bed Ways to
    resist wear and give a long service life
    All gears and shafts in headstock hardened and precision
    ground for long life and extremely quiet running
    FC-25 Meehanite Cast Iron used for rigidity and vibration
    dampening
    Removable Gap for larger diameter work
    High quality electronics used throughout machine
    Slip Clutch on feed rod, to help prevent overloading damage
    of feeds and allow the use of a solid micrometer carriage
    stop for repetitive work
    High Precision Tapered Roller Bearings used in spindle, for the
    ultimate in long life, high precision, and best surface
    finishes. Guaranteed Run Out +/- .0001″ for ultimate
    precision
    Inch AND Metric thread cutting ability is a standard feature
    True INCH PITCH main lead screw, cross feed, and
    compound lead screws make it easy to use for the INCH
    measurement System, yet still has the Metric readings on
    dials for the ultimate in versatility for any job that may come
    about
    Splash oil bath lubrication in Headstock, and Apron, for
    efficient lubrication, and long life, yet simple and reliable,
    maintenance as with oil pump lubrication systems. Also no
    risk of losing oil flow to expensive parts as there can be with
    pump lubricated systems
    Only Extremely High Precision Japanese Spindle Bearings
    are used, NACHI Brand at this time
    Locking Tang in tail stock is provided
    Industry Leading 5 Year Warranty

    Main Specifications:

    Dimensions, approximate overall, incl. stand: Width 70 in. x Height 47 in. x Depth 29 in. (full range cross slide motion)
    Footprint: 68 in. wide x 16-1/2 in. deep (Base Footprints: Headstock Base is 16.5 D x 14.25 W, Tailstock Base 16.5 D, 11.125 W, and 42-5/8″ between the bases)
    Bed length, excluding headstock: 51 in.
    Spindle centerline to floor: 43 in.
    Weight, approximate:1750 lb net
    Motor TEFC type, 1725 rpm, optional 2 HP 1Ø or 3 HP, 3Ø
    Headstock center to tailstock center 40 in. max
    Swing over bed 14 in. diameter
    Swing over cross-slide 8-3/4 in. diameter
    Swing over gap 20-3/4 in. diameter
    Gap insert length 7-3/4 in.
    Spindle face to tailstock quill face 44 in. max
    Saddle travel 36-1/4 in.
    Cross-slide travel 6-1/2 in.
    Compound (top slide) travel 3-1/2 in.
    Spindle Speeds:
    Low range, rpm 50, 70, 95, 140
    Mid range 180, 250, 340, 510
    High range, rpm 700, 980, 1350, 2000
    Carriage drive, thread cutting Leadscrew 8 tpi
    Inch threads Choice of 36, from 3 to 56 TPI
    Metric threads Choice of 34, from 0.4 mm to 7.2 mm pitch
    Longitudinal Feed rates from 0.0026 to 0.0368 in./spindle rev
    Cross Slide Feed Rates from 0.0013 to 0.0184 in./spindle rev
    Spindle
    Chuck/faceplate attachment D1-5 Camlock
    Internal taper MT5-1/2
    Spindle bore 2 in. diameter (slightly over, will pass a 2.000″ piece)
    Spindle length, LH end to chuck mounting face 15-1/2 in. overall
    Spindle length, LH end to chuck face (typical) 19-1/2 in. approx.
    Tailstock
    Internal taper MT3
    Quill travel 4 in.
    Work holding
    Center rest (steady rest) capacity Up to 3 in. diameter
    Follower rest capacity Up to 1 in. diameter
    Country of Origin: Taiwan
    Power requirement: 208 to 240 Vac, 60 Hz, 1 or 3 phase (Choose phase option when purchasing, both recommend a 20A Circuit)
    Power connection type: Direct wire in to electrical cabinet in rear of machine, directly behind headstock

구매하고자 하는 새로운 PRECISION MATTHEWS PM-1440GT?