MAIN FEATURES OF THIS MACHINE:

All Hardened and Ground Steel Gears in head, for much heavier
cutting capability, particularly when compared with plastic gear equipped models
Compact Size for smaller work shops, but has more weight and power to
remove material when needed
Table Graduations in .001″ on X and Y with a true Inch Pitch
Leadscrew, leads to easier operation when tolerances matter
Main Column is attached to the base with 4 bolts from the top, with
a very wide mounting surface for much more rigidity over other
models in this size range
Only Requires Standard 120V Single Phase Circuit, so it can be
set up virtually anywhere, without needing additional circuits
installed in your work shop
3 Year Warranty, for added peace of mind
• Compact, Accurate, Economical Machine. Great for those who are looking for a
compact machine for a smaller work shop, yet need the ability to take heavier cuts
compared with other machines in this size range
• Spindle is Supported by High Precision Tapered Roller Bearings
• Mill Head May be Tilted ±90° (both left and right)
• Precision Manual Fine Down Feed is standard
• Adjustable Tapered Gibs for longer life
• Positive Locks are standard for Table, Head, Quill, and Column
• Easy Reading Dials Have Satin Chrome Finish, Graduated in .001″
• Quill DRO is Standard, Accuracy of the Display 0.0005”, Selectable from
mm/inch
• Generous 18-1/4″ Spindle To Table Max Distance for taller work
• 8-1/2″ Y Axis Travel, More than other machines in this class

STANDARD/INCUDED EQUIPMENT:

PM-727M Milling Machine
Way Covers
Drawbar
R8 Spindle Taper
Quill DRO
Chip Tray

MAIN SPECIFICATIONS:

Model No.: PM-727M
Max. Drilling Capacity: 1-1/4″
Max. End Milling Capacity: 1″
Max. Face Milling Capacity: 3″
Table Size: 27-1/2″ x 7-1/8″
Cross Travel (Y Axis): 8-1/2″
Longitudinal Travel (X Axis): 15″
Table Leadscrew Pitch 10 TPI (.100″ Per Turn)
Table Dial Graduations .001″
Vertical Travel (Z Axis): 16″
Max Distance Spindle to Table: 18-1/4″
Taper of Spindle: R-8, w/7/16-20 Drawbar Thread
Spindle (Quill) Travel: 3″
T Slot Size: 1/2″(T Slots are slightly less than 1/2″, actual size 12mm, our 1/2″ kit
is sized for this machine)
Range of Spindle Speeds: 115-1700rpm, 6 Steps
Head Tilt: Left & Right ±90°
Motor: 1 HP
Net Weight (Not Including Base): 475 LBS
Net Weight (With Optional Base): 575 LBS
Country or Origin: China
Power Required: 110/120V, Minimum 15 Amp Circuit, Approx. 5′ cord with standard 120V plug included
Dimensions (Assembled on stand): 39″W x 74″H x 30″D
Height with head at top of Z travel: 80″ (On Stand)
Height with head at normal working height: 75″ (On Stand)
Optional Stand Height 32″