B & O SAWS B-1030
B & O SAWS B-1040
B & O SAWS B-1048
B & O SAWS B-824
B & O SAWS B-830
B & O SAWS B-840
BAILEIGH BS-210M
110 Volt Metal Cutting Band Saw. Mitering Head. 3/4" Blade Width. Variable Speed Control (66- 280 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Manual or Hydraulic Descent and Coolant...
BAILEIGH BS-300M
The BS-300M is the perfect band saw for those shops that like the look and operation of an old time, American style band saw. It’s the perfect cutoff saw for those shops that cut many different sh...
BAILEIGH BS-350M
Have a job that requires multiple angles in both left and right directions? If so, the BS-350M horizontal band saw might just be the right choice for you. This dual mitering saw has a full cast i...
BAILEIGH BS-350SA
The BS-350SA semi-automatic band saw is the perfect saw for shops where light production is the normal. The BS-350SA runs on 220V, single phase power and has a cutting capacity of 10-1/2”. The be...
BAILEIGH BS-712M
110 Volt Metal Cutting Band Saw With Vertical Cutting Option. Mitering Vice. 3/4" Blade Width. Three Cutting Speeds (125, 215, 270 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Hydrau...
BAILEIGH BS-712MS
110 Volt Metal Cutting Band Saw With Vertical Cutting Option. Mitering Head. 3/4" Blade Width. Three Cutting Speeds (125, 215, 270 FPM). Includes Blade Tension Device, Direct Drive Gear Box, Hydrau...
BAILEIGH BS-916M
The BS-916M horizontal band saw is based off of the BS-300M, but with a little smaller footprint for those shops with limited space. The BS-916M is modeled after the American style saw that has be...
BIRMINGHAM HL-250
CANTEK RF-812
CAROLINA H010
CAROLINA HD10
CAROLINA HP10
CAROLINA HV12
CLAUSING KALAMAZOO KC1016VS
CLAUSING KALAMAZOO KC1016W
CLAUSING KALAMAZOO KC812W
CLAUSING KALAMAZOO MS1218VS
CSUNITEC 5 6031 0010
CSUNITEC 5 6040 0010
CSUNITEC 5 6062 0010
CSUNITEC 5 6079 0020
DAKE SAR 331 SA
DAKE SE 10 DM
Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right miteri...
DAKE SE-810
DAKE SE712
Standard Duty horizontal bandsaw offering accurate cutting, rugged gear box, hydraulic control, chip brush blade cleaner, and wet or dry cutting with simple operation.
DAKE SE912
DAKE JOHNSON 10
DAKE JOHNSON LE10A
DOALL 400A
400A features automatic indexing, pneumatic head lift and hydraulic feed control. Band tensioning is easily set by handwheel to 30,000 psi for more accurate cutting. Standard infinitely variable ba...
DOALL 400M
The 400M general purpose band saw is one of DoALL's introductory machines in the NEW StructurALL family of saws. It’s the ideal machine for the small to medium fabricator or machine shop, looking ...
DOALL 400S
The 400S general purpose band saw is DoALL's introductory machine in the NEW StructurALL family of saws. Swiveling 45 degrees, it’s the ideal machine for the small to medium fabricator or machine ...
ELLIS 1200
GROMAX BS300SA
GROMAX RF-712N
HEM 260 BSA
The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...
HEM 320 BSA
The 320 BSA is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter. The control is connected by a 40” umbilical cord and blade speed adjusts approximately 39 to 320 SFPM....
HEM ABS-NG160
The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...
HEM H130HA-9
Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H Capacity: 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic
HEM H130HA-C
Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Bar-feed: 0-24″ (Multiple Index) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic
HEM H130HM-1
Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic
HEM NG160
The NG160 benchtop band saw is powered by a 2.7 HP variable speed motor. It will cut miter angles up to 45ᵒ in one direction. The NG160 uses a ½” wide blade, is a manual pull-down saw, and includes...
JET EHB-1018V
A new legacy of saws. Saws that need to demonstrate new kinds of flexibility, are counted on to last longer, and operate more safely at the same time. Mitering and dual mitering bring an added leve...
JET EHB-1018VM
A new legacy of saws. Saws that need to demonstrate new kinds of flexibility, are counted on to last longer, and operate more safely at the same time. Mitering and dual mitering bring an added leve...
JET EHB-1018VMH
A new legacy of saws. Saws that need to demonstrate new kinds of flexibility, are counted on to last longer, and operate more safely at the same time. Mitering and dual mitering bring an added leve...