TY MILES MBLD2-18-150
ELMASS P10-200-NC
https://www.elmass.com.au/wp-content/uploads/2017/09/P10200NC.jpg P10-200 NC, 3 AXIS WITH AUTOMATIC DOORS This very fast low cost broaching machine is the ideal solution to mass produce up to 10mm ...
OHIO BROACH RP/224
TY MILES MBLD4
TY MILES MBLD4-18-150R
This model is a 2 ton machine, 18” of ram stroke, traveling at 150 FPM, tooled up with a hydraulic tilt table. The 18 model can also be mounted on wheels, for easy mobility in your shop.
TY MILES MBLD4-24-150R
ELMASS P20-250-NC
The P20-250-NC simplifies broaching of keyways and splines in through holes and blind bores. Its combination of the latest control technology with highly dynamic, guided positioning systems results...
AXISCO CHI-0306
With 3 ton broaching force and 600 mm stroke, which is suitable for making internal spline or keyway.
AXISCO CHI-0308
With 3 ton broaching force and 800 mm stroke, which is suitable for making internal spline or keyway.
AXISCO CHI-0310
With 3 ton broaching force and 1000 mm stroke, which is suitable for making internal spline or keyway.
EASTAR TH3X600
FROMAG CORSA 4-425-APC
ELMASS P36-500-NC
This very robust broaching machine is designed to produce very long and large keyways and splines in small, medium and large production runs ion through holes and blind bores. The P36-500/700 NC is...
ELMASS P36-700-NC
This very robust broaching machine is designed to produce very long and large keyways and splines in small, medium and large production runs ion through holes and blind bores. The P36-500/700 NC is...
AXISCO CHI-0508
With 5 ton broaching force and 800 mm stroke, which is suitable for making internal spline or keyway.
AXISCO CHI-0510
With 5 ton broaching force and 1000 mm stroke, which is suitable for making internal spline or keyway.
AXISCO CHI-0512
With 5 ton broaching force and 1200 mm stroke, which is suitable for making internal spline or keyway.
EASTAR TH5X1000
NANFANG LK8805NF
OHIO BROACH VSHD-524
OHIO BROACH VSHD-536
OHIO BROACH VSHD-548
OHIO BROACH VSHD-554
TY MILES MB10-30-120R
TY MILES MBLD10-30-120R
NANFANG L5106
This machine is used for various geometric requirements of various parts (such as round hole, spline hole, single key hole, involute toothed spline hole, etc.). Users who require precision and high...
FROMAG CORSA 7-600-APC
EASTAR TH-1000X235
EASTAR TH7.5X1300
AXISCO CHI-0810
With 8 ton broaching force and 1000 mm stroke, which is suitable for making internal spline or keyway.
AXISCO CHI-0813
With 8 ton broaching force and 1300 mm stroke, which is suitable for making internal spline or keyway.
TY MILES MBLD16-42-120R
FROMAG FSR 9-800 MZ
Electromechanical broaching machine pulling force 90.000 N, stroke length 800 mm with tool retriever, movable table automatic stroke door
