Used GEKA DUAL OPERATOR CNC HYDRAULIC IRONWORKER , Model 165SD Semi Paxy, 185 ton, Stock No. 10343

Machine is on zero condition You can tested before buy the machine in our showroom

140 Ton X 12’ Ironworker with Automatic Hold Down, Coupling Wrench, Punch Holder, Stripper, & Die Block, 3/8” Allen Wrench, 5 Punch & Die Sets 9/16” through 1-1/16”, Set of Chip Buckets, Set of Angle Knives, Extra Filter Element, Set 1-1/4” Round Bar Knives, Foot Switch, Set of 16-5/8” Plate Shea...

140 Ton X 20-½” Ironworker with Automatic Hold Down, Coupling Wrench, Punch Holder, Stripper, & Die Block, Chip Bucket, 5 Punch & Die Sets 9/16” Through 1-1/16”, Extra Filter Element, Set of Angle Knives, Two (2) Foot Switches, Set 1-1/4” Round Bar Knives, Instruction/Parts Book/Video Link, Set o...

see PDF

120 Ton Geka 110 Semi Paxi CNC Hydraulic Ironworker

120 Ton Dual Operator Ironworker with the Semi-Paxy CNC Punching Option utilizing the Geka Pro PC Controller, 16"x 40" Table, Dual Operator Workstations, Angle, Bar, Flat And Round Shearing Stations with Manual Backgage.

Great Machine. Hydraulics to factory specification. All blades are sharp or new. Comes with 4 sets of punches a dies. 460v or 230v 3 phase. Able to convert to 1 phase for an additional cost. Punches 1-1/2" through 1" Shears 6x6x1/2" Angle Shear 1"x12" or 1/2"x24" Flat Thanks for your inte...

USED 110 TON GEKA IRONWORKER HAS TWO STATION FOOT PEDAL OPERATION TOUCH TO CUT ELECTRIC BACK STOP GAUGE ANGLE SHEAR AND FLAT BAR WITH CHANEL BLADES COPER NOTCH STATION AND PUNCH TABLE Conveyer tables included WE ARE ASKING $11,500 READY TO BE SEEN RUNNING ON OUR FLOOR NOW!! STOCK #65335

SERIAL .......................... 20759 MODEL ........................... 110/S CAPACITY ........................ 110 Ton PUNCHING CAPACITY ............... 1-1/4" X 1" DEPTH OF THROAT ................. 12" STROKE .......................... 3" SHEAR FLATS ..................... 24" x 5/8"; 16...

SERIAL ....................... 3172 MODEL ........................ CEP/11-H CAPACITY ..................... 11 TON ROUND PUNCH AT ½" ............ 1-1/8" SQUARE PUNCH AT 3/8" ......... 1-¼" RECTANGULAR PUNCH AT ¼" ...... 1-5/8" ANGLE IORN AT 90 DEGREES ..... 3-9/16" X 7/16" ANGLE IRON AT 45 ...

MODEL ........................ HYDRACROP 100-S PUNCHING CAPACITY ............ 110 TON (1-1/4" ROUND THRU 1") THROAT DEPTH ................. 12" STROKE ....................... 3" ANGLE CAPACITY ............... 6" x 6" x 1/2" FLAT SHEAR CAPACITY .......... 24" x 5/8" ROUND/SQARE SOLID BAR ......

120 Ton 12" Throat Geka HYDRA CROP 110A IRONWORKER, Well Equipped and Maintained

Geka Hydracrop 110A Hydraulic Ironworker

Can be seen under power in our PA warehouse! With punches and dies .

SERIAL ............................... 40632 583 89 015 MODEL ................................ 1100G CAPACTIY ............................. 110 TON CAPACITY, PUNCH ...................... 1.25" HOLE THROUGH 1" CAPACITY, PUNCH ...................... 3.5" HOLE THROUGHT 1/4" CAPACITY, ANGLE .......

110 Ton Hydraulic Ironworker with Complete Punching Attachment with split dovetail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear.

100 Ton Edwards Hydraulic Ironworker

’96 Edwards 100 ton ironworker

Edwards 100 Ton Hydraulic Ironworker

EDWARDS “JAWS IV” 100 TON HYDRAULIC IRONWORKER USA 1998’ #GMT-2028

110 TON GEKA HYDRAULIC IRONWORKER Model no. HYD-100 Punch - tonnage: 110 tons - hole capacity: 1-3/16" in 1" mild steel - stroke: 3" - throat depth: 12" - SPM approx.: 28 Shear - angles (90°): 6" x 6" x 1/2" ...

CAPACITY .......................... 100 TON CAPACITY ANGLES ................... 3/4" X 5" CAPACITY SHEARING ................. 1" X 12" PHASE ............................. 1 MOTOR ............................. 3 HORSEPOWER

SERIAL ....................... 4412450477051 MODEL ........................ 210 SUPER 20 YEAR OF MANUFACTURE........... 1977 CAPACITY ..................... 105 TON PUNCH HOLE DIAMETER .......... STANDARD 1-1/4 @ 15/16" - MAX 3-1/2 @ 5/16" THROAT ....................... 20" SHEARING............

ONE - USED PIRANHA 90 TON HYDRAULIC IRONWORKER, P-90, 1999, Stock No. 10605

90 Ton Hydraulic Ironworker with Complete Punching Attachment with split dovetail mounting 5 Punch and Die sets Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear.

*** WE TAKE TRADE INS | 4" x 4" x 1/2" Scotchman #9075-24; Punch die block & stripper assembly; 24" flat bar shear; Angle shear attachment; 24" Press brake attachment: Round & Square bar shear attachment; Punch tooling

MODEL ............................... 9075-24 PUNCHING CAPACITY ................... 90 TON PUNCHING DIAMETER THRU THICKNESS .... 1-1/16" THRU 1" CAPACITY ANGLE @ 90 DEGREES ......... 6" X 6" X 1/2" CAPACITY ROUNDS ..................... 1-1/4" CAPACITY SQUARES .................... 1" CAPACIT...

Geka Ironworker Model 80A   With Production Package  Punching 1.57” diameter x 0.55” thick  Throat depth:11.81”  Angle cutting 5” x 5” x .5” @ 90 degrees or 2.75” x 2.75”x 3/16”@ 45 degrees  Shearing 17.71” x .59” or 11.81” x 0.78”  Notching 3.5” x 2” x .5”  Rounds 1.75” ...

This GEKA Hydracrop 80/SD Punching Machine was manufactured in Spain in the year 2007. Equipped with a GEKA SEMIPAX Control unit, this machine works with a clamping force of 800 kN. It incorporates 5 stations and is equipped with an automatic positioning system (Semipaxy), as well as an electrica...

Peddinghaus 210 Super 16, 88 Ton Mechanical Iron Worker

5" x 5" x 1/2" Peddinghaus #88/120, 88 ton, 20" shear with hydraulic holddown, 1993

88 Ton X 9” Ironworker with Automatic Hold Down, Coupling Wrench, Punch Holder, Stripper, & Die Block, Chip Bucket, 5 Punch & Die Sets 9/16” through 1-1/16”, Extra Filter Element, Set of Angle Knives, Two (2) Foot Switches, Set 1” Round Bar Knives, Instruction/Parts Book/Video Link, Set of 20-5/8...

6" x 6" x 1/2" Scotchman #DO-8514-20M, 85 ton, dual op., 20" shear, 14" throat, 2007

SERIAL .......................... 1736 MODEL ........................... HYD 70-S YEAR NEW ........................ 1986 CAPACITY PUNCHING ............... 77 TON MAXIMUM HOLE DIAMETER ........... 1-1/8" X 3/4" CAPACITY ANGLES AT 90 DEGREES ... 5" X 5" X 1/2" CAPACITY ANGLES AT 45 DEGREES .....

SERIAL .......................... 5812 MODEL ........................... HYD-70 CAPACITY PUNCHING ............... 77 TON MAXIMUM HOLE DIAMETER ........... 1-1/8" X 3/4" CAPACITY ANGLES AT 90 DEGREES ... 5" X 5" X 1/2" CAPACITY ANGLES AT 45 DEGREES ... 3" X 3" X 5/16" FLATS ....................

SERIAL ............................ 88500843 MODEL ............................. 675H NEW ............................... 1988 PUNCH CAPACITY .................... 75 TONS PUNCH DIAMETER X PLATE THICKNESS .. 1-1/4" X 11/16" TO 15/16" X 7/8" PUNCH WORKING HEIGHT .............. 39-15/16" PUNCH...

Hill Acme - Hydraulic Ironworker | 75 Ton

Piranha Hydraulic Ironworker 70 Ton

SERIAL ....................................... 87500768 MODEL ........................................ #1-1/2C YEAR NEW ..................................... 1987 PUNCHING CAPACITY ............................ 65 TON PUNCH DIAMETER THROUGH PLATE THICKNESS ....... 1-1/6" X 3/4" DEPTH OF THROA...

This heavy duty, dual cylinder machine is in mint condition. It comes standard with 5 work stations and offers simultaneous dual operation. Wired 230 volt, 3 phase. Located in St. Louis, MO. **Showroom Floor Model** Excellent condition & used less than five times.

Peddinghaus Model 210A/16 71 Ton Capacity 3Ph Iron Worker W/Angle Cutter Running (#17869)

HILL ACME 4A 70 TON UNIVERSAL HYDRAULIC IRONWORKER

70 Ton Capacity Manual Hydraulic Ironworker with 1 - 1/16” Punching Capacity, 24” Plate Shearing Capacity, Punch and Die Holder, Stripper with Guard Housing and Electric Foot Pedal Operation.