ACE MICROMATIC CSJ 400XL
Ace Designers CSJ 400XL CNC Lathe, 2022- Tailstock, One Year Parts Warranty
AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
AMADA S-10
DMG AMADA WASINO S10 CNC 8-Axis MULTI-TASKING TURNING/MILLING CENTER, Fanuc 31i Model B CNC Control, 6" 3-Jaw Chuck, 12.2" Swing, 10.63" Between Centers, 5000 RPM Spindle, 10.24" Max Turning Diamet...
AMADA S-10
Fanuc 31i-Model B CNC Control Live Tooling & Y Axis on Both Turrets Tailstock (2) 10 Station Turrets
AMADA TECHNO WASINO G07
Amada Techno Wasino G07 Gang Tool CNC Lathe w/ Bar Feeder
AMADA WASINO G-05
Amada Wasino G-05 CNC Gang Lathe, 2012 – Gantry Loader, Mist Buster, Fanuc Control
AMADA WASINO G-07
2011 Amada Wasino G07 Gang-Type CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor, Manuals Included
AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
AMADA WASINO J1
AMADA WASINO S-10
Fanuc 31i-Model B CNC Control Live Tooling & Y Axis on Both Turrets Tailstock (2) 12 Station Turrets
AMERA SEIKI T-312-30"
T-312-750, 3.5 bar, 12 chucks, 30hp, 3400rpm, 30.31 Maximum work length, 17.7 max turn dia.23.6 max swing, 12 tool Turret, programmable tail stock, chip conveyor, BF interface, Fanuc 0i-TD control,...
AMERICAN 3220S
AMERICAN (#6184) CNC LATHE, MODEL 3220S, 24” SPINDLE SIZE, 120” MAX C-C DISTANCE, 22” MAX OVER CARRIAGE, 32” MAX OVER WAYS, 40 H.P., SPINDLE SPEED 10-1500 RPM, S/N 78836
AMERICAN 4025 UNITURN
2 Axis, Flat Bed, Steady Rest, Fanuc OT CNC
AMERICAN TOOL WORKS 32-25W
Murphy Machinery is Pleased to offer the Following in Shop Under Power CNC Turning Center for your review and consideration. 10-10 Condition with All Options. Loaded with All Tooling and Standard S...
ANNN YANG DY 1200 X 6000C
BIGLIA B 500 SM
Operating voltage 380 V Frequency 50 Hz Nominal current 35 A With counter spindle without own drive, including 3-jaw chuck diameter 160 mm mounted on it, further 3-jaw chuck diameter 200 mm Chi...
BIGLIA B565YS
Travel B axis 490 mm Indexability C axis 0.001° Circulation diameter over bed 580 mm Rod diameter 71 mm Counter spindle draw tube bore 46 mm Shaft size 25 x 25 mm Diameter of boring bar 32 mm...
BOEHRINGER DUS 400 TI
Model DUS 400 ti Year: 2003 S/N: 2012.1035-01 Condition Used Assembled Dimensions: 133 x 78 x 70 feet GENERAL Distance Between Centres 40 " Swing Over Ways 16.55 " Swing Over Carriage 9.05 " Bore D...
BOEHRINGER DUS 560 TI
400 V, 50 Hz Nominal current 63 A Displacement travel face slide 345 mm, top support 125 mm Centre height above flat track 280 mm Bed width 360 mm, bed slide guide length 520 mm Facing slide 6...
BRIDGEPORT EZ PATH
Romi Bridgeport EZ- Path CNC Lathe, 1995 – Available Immediately
BRIDGEPORT EZ PATH
Bridgeport Romi EZ Path I CNC Lathe, 1996
BRIDGEPORT EZ PATH
BRIDGEPORT "EZ PATH" CNC LATHE
BRIDGEPORT ROMI CENTUR 35E
Bridgeport Romi Centur 35 E CNC Lathe, 1992 – Tailstock, Chip Conveyor
BUDERUS 235 IA-T-L
Largest workpiece diameter: Ø250 mm Largest workpiece length: 150 mm Height of the workpiece spindle above the floor: 1150 mm Largest swing diameter above the table 310 mm Workpiece spindle speeds ...
BUDERUS 235 MA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC...
BUDERUS CNC 235 H N-LA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 250 mm Largest workpiece length: 350 mm Largest swing diameter above the table: 310 mm Height of the workpiece spindle above the floor: 1...
BUFFALO MACHINERY MICROTURN CHALLENGER BNC-3080
CNC Pipe-thread-lathe with big spindle bore diameter. Two chucks on each side ( left and right ) of spindle box. Main chuck: SCHUNK ROTA EP 500-260, 3 jaw chuck. Turning diameter above bed = 760 m...
CHALLENGER BNC-1860
2003 MICROCUT CHALLENGER BNC-1860 TEACH-IN CNC LATHE, TAILSTOCK, FAGOR CONTROLLER, 2.55" SPINDLE BORE
CHALLENGER SL-350
Challenger SL350 Hollow Spindle, 35" x 118", 10" Bore, Fanuc OiTC CNC, Front/Rear Chucks, (2) Steady Rest, 2006, #43068
CHEVALIER FBL-230
2021 Chevalier FBL-230 CNC Turning Center With Tailstock. Machine is in "like new" condition.
CHEVALIER FBL-530C
CHEVALIER FCL-1840F
2002 Chevalier FCL-1840F CNC Teach Lathe, Tailstock, Coolant System, 4-Station Toolpost, Automatic Lubrication
CHEVALIER FCL-2460
2 Axis Design, Rated Capacity 18” Diameter x 60” Turn Length, X-Axis Travel 12.2”, Z-Axis Travel 59', Swing Over Bed 24”, Swing Over Cross Slide 14.5”, 3 Jaw Chuck Diameter 12”, Max. Spindle Speed ...
CHEVALIER FCL-2580
CNC Lathe
CINCINNATI AVENGER 250S
Cincinnati Avenger 250S, 23" Swing, 19" C.C, 4000 RPM, Sub Spindle, Bar Feed, Acramatic 850SX, #32335