AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
CHEVALIER FCL-1840F
2002 Chevalier FCL-1840F CNC Teach Lathe, Tailstock, Coolant System, 4-Station Toolpost, Automatic Lubrication
CLAUSING TORNADO 200
Clausing Colchester Tornado 200 CNC Lathe, 1995
COLCHESTER MULTI TURN 3000
Colchester Multi Turn 3000 CNC Lathe, 2007 – Low Hours, Tailstock, Fanuc Control & Tooling Included!
DAEWOO LYNX 200
Explore our 2000 Daewoo Lynx 200 CNC Lathe, used but robust with 18.11" swing, 8" chuck, 1.5" bar capacity, 10 hp, 5k RPM max, 11.02" turn dia. Features tool setter, coolant system, 12 pos. turret.
DAEWOO LYNX 200
Daewoo Lynx 200 CNC Lathe, 1998 – Mitsubishi Control, Tailstock
DAEWOO LYNX 200A
Excellent condition and well Tooled
DAEWOO LYNX 210C
Daewoo Lynx 210C CNC Turning Center with Fanuc Control, Tailstock and Chip Conveyor Manufacturer: Daewoo Model: Lynx 210C Year: 2002 Main Unit Approx Weight: 7750.00 lbs Main Unit Dimensions (in ...
DAEWOO PUMA 10HC
Daewoo Puma 10HC Heavy Duty CNC Lathe in 10-10 Condition, 10" 3- Jaw Chuck Installed, Programable Tailstock, Chip Conveyor, All Tooling Books & Manuals
DAEWOO PUMA 200
DAEWOO PUMA 200C CNC LATHE
DAEWOO PUMA 200C
Daewoo Model Puma 200C CNC Turning Center, New 1998, 2-Axis, Mitsubishi CNC Control, 3-Jaw Chuck and Master Collet Nose, Parts Catcher, Tool Setter, Tailstock.........$6,950.00 F.O.B. Dayton Ohio...
DAEWOO PUMA 200C
Daewoo Puma 200C, 1997, Fanuc 18T, 2.56" Bar Capacity, 4,500 RPM, MT#4, New Hydraulic Pump, Multiple Tool Holders Holders, Turbo Chip Conveyor, Programmable and Manuals.
DAEWOO PUMA 200MS
PREOWNED DAEWOO PUMA TURNING CENTER, MODEL #: 200MS, S/N: 20MS0001
DAEWOO PUMA 200MSC
CNC Lathe
DAEWOO PUMA 8HC-3A
This 1995 DAEWOO PUMA 8HC-3A comes from a small garage shop with only two CNC machines and is climate controlled to 70 degrees year round. It cut only aluminum aerospace parts for Boeing and Airbus...
DAEWOO PUMA 8S
Daewoo Puma 8S CNC Lathe, Fanuc 0-T Control, 8" Kitagawa 3-Chuck, Tool Presetter, Tailstock, s/n PM8S-0277, 1995 Specifications: Capacity: Max Turning Diameter: 14.6″ Max Turning Length: 20.7″ ...
DALIAN CKE6150Z
DALIAN MODEL CKE6150Z 20" x 60" CNC TOOL ROOM LATHE SERIAL NO. MW0128199 BUILT 2012 STOCK NO. 4322 FOR A VIDEO OF THIS MACHINE: https://youtu.be/watch?v=GEj0kdQw4_k CATALOG SPECIFICATIONS: ...
DMG MORI CTX 410
DMG Mori CTX 410 Gildemeister, 20" Swing, 24" BC, Siemens 840D, 12 Sta. Trt, L. Mill, Pre-Setter, Sub Spindle 2007#43190
DMG MORI CTX BETA 1250 TC
DMG MORI CTX BETA 1250TC CNC 5-AXIS LATHE, 2013
DMG MORI CTX BETA 1250 TC
2018 DMG Mori CTX Beta 1250 TC LOW HOURS
DMTG CKE6150Z
20" x 80" Flat Bed
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2011 | MM 85164
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85166
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85172
DOOSAN PUMA 240GL
DOOSAN PUMA 240GL CNC Lathe With Gantry Loader
DOOSAN PUMA TW2600M GL
Less than 2,000 cutting hours per spindle! Available for immediate purchase is this lightly used twin spindle 2019 Doosan Puma TW2600M-GL multi-axis CNC lathe a with gantry loader system. This rob...
DOOSAN DAEWOO LYNX 200A
DAEWOO DOOSAN LYNX 200B CNC TURNING CENTER, Fanuc 21i-T CNC Control, 6.5" 3-Jaw Chuck, 18.11" Swing, 11.02" Between Centers, 11.81" Max Turning Length, 10 HP, 5000 RPM, 12-Position Turret, Tool Set...
DOOSAN DAEWOO LYNX 220C
Doosan Daewoo Lynx 220C CNC Turning Center, 2005 Fanuc i Control 5C Collet Nose 12 Position Turret Parts Catcher
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
EUROTECH B465Y2
Eurotech B465Y2 CNC Turning Center, New in 2020
FEMCO DURGA 12E
Retro'd Fanuc 18T control,
FEMCO DURGA 12E
Femco Durga-12E 9.84" x 23.62" CNC Turning Center
FEMCO DURGA 25E
Femco Durga 25E CNC Lathe, 1998
FEMCO HL-25
Femco HL-25 9.84" x 23.62" CNC Turning Center
FEMCO HL-25
Femco HL-25 CNC Lathe, 2008 – Fanuc Control, Tailstock, Chip Conveyor
FEMCO HL-25DM
FEMCO HL-25DM Live Tool CNC Lathe (2013)
FORTUNE V-TURN 26
Very good shape!!! Only Used in shows for exhibition very few machining time
FRYER ET-21
Flat Bed CNC Lathe with 12" Chuck and 8 Position Turret
GILDEMEISTER CTX-320 LINEAR
Excellent Condition
GILDEMEISTER CTX-320 LINEAR
Gildemeister CTX-320 Linear CNC LATHE, Fanuc 180i
GILDEMEISTER CTX-400 S2
1998 Gildemeister CTX-400 S2 CNC Lathe, 10" SMW-Autoblok 3-Jaw Hydraulic Chuck, Chip Conveyor, Hydraulic Tailstock, 12-Station VDI30 Turret