AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
AMADA WASINO J1
CHEVALIER FBL-230
2021 Chevalier FBL-230 CNC Turning Center With Tailstock. Machine is in "like new" condition.
CITIZEN MIYANO BNA-42S2
Citizen Miyano BNA-42S2 CNC Turning Center, New in 2016
CLAUSING TORNADO 200
Clausing Colchester Tornado 200 CNC Lathe, 1995
CLAUSING COLCHESTER STORM 80
CLAUSING / COLCHESTER STORM 80 CNC TURNING CENTER - FANUC EQUIPPED WITH: -- SERIAL: T70086/86 -- AGE: 1997 -- 6" CHUCK - 3 JAW -- TAILSTOCK -- FANUC 21T -- 4,000 RPM -- 230 VOLTS -- MAX TURNING 6...
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CUBIC GTM-42D
Low Hours, 7 Axes, High Productivity Machine.
DAEWOO LYNX 200A
Excellent condition and well Tooled
DAEWOO PUMA 200-2SP GL3 TWIN SPINDLE
2) 8-Position turrets, Type GL3 Gantry lC, Fanuc 18-iT
DOOSAN LYNX 2100
Used CNC Lathe, 4-axis, 600mm swing, 330mm length, with LNS bar feeder, chip conveyor, turret, tool setter, and more.
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2011 | MM 85164
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85172
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85166
DOOSAN PUMA TW2600M GL
Less than 2,000 cutting hours per spindle! Available for immediate purchase is this lightly used twin spindle 2019 Doosan Puma TW2600M-GL multi-axis CNC lathe a with gantry loader system. This rob...
DOOSAN DAEWOO LYNX 200A
DAEWOO DOOSAN LYNX 200B CNC TURNING CENTER, Fanuc 21i-T CNC Control, 6.5" 3-Jaw Chuck, 18.11" Swing, 11.02" Between Centers, 11.81" Max Turning Length, 10 HP, 5000 RPM, 12-Position Turret, Tool Set...
EMAG VL 3 DUO
Emag VL3 Duo, Twin Spdl, 2-Ttrs, Collet Chucks, Y-axis, Milling, Coolant, Fanuc CNC , 2017, #43016
EMAG VL 5I
Emag VL5i Single Spindle Live Tool Vertical Turning (2) Machine Cell (2016)
EMAG VSC 315
FUJI CSD-300
10,238 Cut hours (2) Available. The CSD-300 Twin Spindle Lathe features parallel twin two spindle CNC lathes with both Z- and X-axis box way slides for heavy cutting, superior surface finish and l...
FUJI HM-30T1
FUJI HM-30T1 SINGLE SPINDLE CNC LATHE W/GANTRY & MILLING
GILDEMEISTER MF SPRINT 42
Gildemeister MF Sprint 42 CNC LATHE, Siemens 840C, Live Tool, Subspndl,FMBTurbo Barfeed
HAAS GT-20
Haas CNC Control
HAAS SL-10
2008 Haas SL-10 CNC Lathe, Tailstock, Tool Pre-Setter, Chip Auger
HAAS SL-10
CNC Lathe
HAAS SL-10
HAAS SL-10 CNC TURNING CENTER, Haas CNC Control, Royal Collet Chuck, 16.25" Swing, 14" Max Turning Length, 1.5" Bar Capacity, 2.31" Spindle Bore, 15 HP, 6000 RPM, 12-Position Turret, Tool Setter, S...
HAAS ST-10Y
Haas ST-10Y CNC Turning Center with Live Tooling and Rhinobar Feed Stock: 7040 Manufacturer: Haas Model: ST-10Y Age: 2012 CONTROL: HAAS CNC CONTROL WITH COLDFIRE PROCESSOR CHUCK SIZE: 6.5" DIAMETER...
HAAS ST-10Y
Very nice Haas ST-10Y. Live tools, "Y" Axis, Sub Spindle, Barfeed, Chip conveyor and more! Note: Royal Rota Rack shown in photo is not available.
HAAS ST-15
"2018 HAAS ST-15 CNC Turning Center - Very Low Hours! This used HAAS ST-15 is in great condition, with under 300 hours of use. With a powerful 20 hp motor, 12-station BOT turret, and a max RPM of 4...
HAAS ST-15
Haas, ST-15, 2018, CNC Lathe
HAAS ST-15
Nice clean machine. Well maintained. Low hours!
HAAS ST-15
Haas ST-15 w/Subspindle & Barfeed CNC LATHE, Haas CNC, 8" & 5" chks, Parts Catcher, Barfeed
HARDINGE CHNC-I
PRECISION CNC CHUCKING LATHE
HARDINGE CHNC1 PRECISION CNC CHUCKER
2 Axis CNC Chucker