AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
AMADA WASINO J1
BIGLIA B565YS
Travel B axis 490 mm Indexability C axis 0.001° Circulation diameter over bed 580 mm Rod diameter 71 mm Counter spindle draw tube bore 46 mm Shaft size 25 x 25 mm Diameter of boring bar 32 mm...
CHEVALIER FBL-230
2021 Chevalier FBL-230 CNC Turning Center With Tailstock. Machine is in "like new" condition.
CINCINNATI MILACRON AVENGER 250T
2 Axis, 8" Chuck, Tool Presettter, 850SX CNC
CINCINNATI MILACRON HAWK 150
Make: Cincinnati Milacron Model: Hawk 150 ERD Serial No: 7051-F00-98-0168 Year New: 1998 Hours: 31,000 Power On Cutting time: 5641 Hours! Condition: Used, Overall in Excellent Shape • Machine is ...
CITIZEN MIYANO BNA-42S2
Citizen Miyano BNA-42S2 CNC Turning Center, New in 2016
CLAUSING TORNADO 200
Clausing Colchester Tornado 200 CNC Lathe, 1995
CLAUSING COLCHESTER STORM 80
CLAUSING / COLCHESTER STORM 80 CNC TURNING CENTER - FANUC EQUIPPED WITH: -- SERIAL: T70086/86 -- AGE: 1997 -- 6" CHUCK - 3 JAW -- TAILSTOCK -- FANUC 21T -- 4,000 RPM -- 230 VOLTS -- MAX TURNING 6...
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
COLCHESTER TORNARDO T4
LNS SUper Hydrobar feeder Tooling Vdi 40 system Chip conveyor Collet device with inserts Running hours 4500 H Max. turning Ø:230mm X-Axis: 200mm Z-Axis: 450mm Spindle bore: 61mm Sp...
CUBIC GTM-42D
Low Hours, 7 Axes, High Productivity Machine.
DAEWOO LYNX 200A
Excellent condition and well Tooled
DAEWOO PUMA 10HC
Daewoo Puma 10HC Heavy Duty CNC Lathe in 10-10 Condition, 10" 3- Jaw Chuck Installed, Programable Tailstock, Chip Conveyor, All Tooling Books & Manuals
DAEWOO PUMA 200
DAEWOO PUMA 200C CNC LATHE
DAEWOO PUMA 200-2SP GL3 TWIN SPINDLE
2) 8-Position turrets, Type GL3 Gantry lC, Fanuc 18-iT
DAEWOO PUMA 2000SY
Daewoo Puma 2000SY CNC Turning Center Lathe
DAEWOO PUMA 200C
Daewoo Model Puma 200C CNC Turning Center, New 1998, 2-Axis, Mitsubishi CNC Control, 3-Jaw Chuck and Master Collet Nose, Parts Catcher, Tool Setter, Tailstock.........$6,950.00 F.O.B. Dayton Ohio...
DAEWOO PUMA 200C
Daewoo Puma 200C, 1997, Fanuc 18T, 2.56" Bar Capacity, 4,500 RPM, MT#4, New Hydraulic Pump, Multiple Tool Holders Holders, Turbo Chip Conveyor, Programmable and Manuals.
DAEWOO PUMA 200MSC
CNC Lathe
DAEWOO PUMA 230
Daewoo Puma 230 CNC Lathe, 1999- Tailstock, Chip Conveyor
DAEWOO PUMA 8HC-3A
This 1995 DAEWOO PUMA 8HC-3A comes from a small garage shop with only two CNC machines and is climate controlled to 70 degrees year round. It cut only aluminum aerospace parts for Boeing and Airbus...
DAEWOO PUMA 8S
Daewoo Puma 8S CNC Lathe, Fanuc 0-T Control, 8" Kitagawa 3-Chuck, Tool Presetter, Tailstock, s/n PM8S-0277, 1995 Specifications: Capacity: Max Turning Diameter: 14.6″ Max Turning Length: 20.7″ ...
DMC DL 22LSY CNC LATHE
Live Tool, Sub Spindle, Barfeed, Fanuc CNC
DMG MORI CTX BETA 1250 TC
Siemens Sinumerik 840D CNC Control 5-Axis Simultaneous Machining LNS Quick Load Servo S3 Bar Feeder CAPTO C6 Milling Spindle Renishaw RMP60 Spindle Probe Renishaw Tool Length Measurement
DMG MORI NLX 2000/500
2017 DMG MORI NLX 2000 MC/500 CNC TURNING CENTER W/ LIVE MILLING, SN# NL203171112, 8" 3-JAW CHUCK, ATS S26 COLLET CHUCK, 12 STATION TURRET W/ LIVE MILLING, 5000 TOP RPM, TOOL EYE, PROG. TS, LNS CC
DMG MORI NLX 2000/500
2015 DMG MORI NLX 2000 MC/500 CNC TURNING CENTER W/ LIVE MILLING, SN# NL202150211, 8" 3-JAW CHUCK, 12 STATION TURRET W/ LIVE MILLING STATIONS, 5000 TOP RPM, TOOL EYE, PROG. TS, LNS CC
DOOSAN 240MSB
Live Tool, Sub Spindle, Parts Catcher, Tool Presetter, Fanuc CNC
DOOSAN LYNX 2100
Used CNC Lathe, 4-axis, 600mm swing, 330mm length, with LNS bar feeder, chip conveyor, turret, tool setter, and more.
DOOSAN LYNX 2100LB
With FANUC i-Series CNC Control, Chip Conveyor, Coolant System, Tail Stock, & Tool Pre-setter Two Machines available. Low hours ~400 hours cutting time.
DOOSAN LYNX 2100LB
Our company directly owns the machines. We have five showrooms in Korea, where we check all the issues with the machines, repair them, and then sell them. You can purchase with confidence. We alway...
DOOSAN LYNX 2100LB
Doosan Lynx 2100LB CNC Lathe, 2018 – LNS Chip Conveyor, Part Catcher, Fanuc
DOOSAN LYNX 2100LSY
Live Tool, Sub Spindle, Bar Feed, Tool Presetter, Mist-Fit MF-550, 3 Jaw Chuck, Fanuc i Series CNC
DOOSAN LYNX 2100LYA
CNC Lathe
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85166
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2011 | MM 85164
DOOSAN LYNX 220A
DOOSAN LYNX 220A CNC LATHE NEW: 2009 | MM 85172
