BARNES HH-10
BARNES HH-12
BARNES HH-25
BARNES HV-1000
BARNES HV-5000
BARNES HV-8000
CENTURY MACHINE 74H-10
ENGIS 0025-14S
ENGIS FPM-3X
Manufacturers of large hydraulic valve bodies face a challenge aligning and finishing the bores once the bodies have been stacked. Engis has designed a three axis single-pass bore finishing system...
ENGIS LPM-4000
Our LPM Series range of machines can assist you with finishing a wide range of bore sizes; from 1.5mm to 150mm. Since the bases are standard, manufactured in quantity, and then customized to your a...
ENGIS SPM-6000
We have created the SPM Series specifically for job shops running small to medium sized parts. This provides you with a cost effective bore finishing solution with the flexibility to run different ...
ENGIS SPM-SE-6000
MUTSCHLER MET-2
NAGEL ECO 120
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL ECO 180
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL ECO 20
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL ECO 40
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL ECO 80
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL ECO H
Low / Medium Volume ECO Series Standard Honing Machines are designed for both manual tending and full automation. These machines retain the coveted features of the high volume machines but engineer...
NAGEL PVT
NAGEL VS 10
NAGEL VS 5
NAGEL VS 8
OHIO TOOL WORKS OTW 1000/10HP
The OTW 1000 is offered in two configurations, designed to satisfy honing requirements from 0.50" (12.7mm) or smaller thru 21.0" (533.4mm). The 5.0 HP (3.73 KW) machine is designed for lighter duty...
OHIO TOOL WORKS OTW 1000/5HP
The OTW 1000 is offered in two configurations, designed to satisfy honing requirements from 0.50" (12.7mm) or smaller thru 21.0" (533.4mm). The 5.0 HP (3.73 KW) machine is designed for lighter duty...
OHIO TOOL WORKS OTW 3000
OHIO TOOL WORKS OTW 5000
The OTW 5000 is our heavy duty production machine. For higher stock removal applications, the Model 5000 provides both the power and durability for multi-shift, heavy production applications.