FASCUT FR-800
FASCUT FR-800-C
Both bend and cut up to #8 (1" dia.) rebar with one easy to use machine. Set up at the shop or out on the job site.
FASCUT FS-600
Both bend and cut up to #6 (3/4" dia.) rebar with this compact portable unit. Our most popular model for Contractors!
GMS ECONOLINE BS 36
HIT 29-PCL16N
HIT 29-PCL19
HIT 29-RB13
HIT 29-RB16
HIT 29-RB19N
HIT 29-RB25-6
HIT 29-RB32
KRB 11
KRB 11 MECH
KRB 11M
KRB 14
KRB 18
KRB 722HD
KRB BAR FORM 1016B
KRB BAR FORM 1020B
KRB COIL FORM 1016
KRB COIL FORM 1016C
KRB COIL FORM 1020C
KRB COIL FORM 1020C ES
KRB COIL FORM 612C
KRB COIL FORM 616C
KRB DURABEND
KRB DURABEND 211
KRB MAGNABEND 111
KRB MULTI FORM 1016M
KRB MULTI FORM 1020M
KRB MULTI FORM 1020M ES
KRB MULTI FORM 616M
KRB STRAIGHT-CUT 1016
MULTIQUIP HBC-19B
Cuts rebar up to 0.75-inches (20 mm) thick in 2.5 seconds 115V, 60 Hz single-phase motor Hydrualic pump features magnetic particle filtering for maximum life Heat-treated steel blades can be rotate...
MULTIQUIP HBC-25B
Slices rebar up to 1 inch (25 mm) in 3.5 seconds Weighing only 48.5 pounds (22 kg) the unit is easily moved around the job Powered by a 115V electric motor with easily accessible brushes Heat treat...
MULTIQUIP MAYCO MB25A
RMS 14
The RMS 14 Bender features a 10 HP motor, a four speed transmission, and a heavier chassis than our 11 Bender. This machine is capable of bending all sizes of rebar up to #14 (45mm). Each machine i...
ROD CHOMPER BRE11
Motor: 10 HP Voltage: 220v single phase/any voltage 3 phase Cycle: 50 or 60 Bending Table Height: 36″ Bender Speed: 10 RPMs Dimensions: 50″ (L) x 38″ (W) x 40″ (H) Weight: 2000 lbs. Hydraulic oil c...
ROD CHOMPER BRE11Z4
Motor: 10 HP Voltage: 220v single phase/any voltage 3 phase Cycle: 50 or 60 Bending Table Height: 36″ Bender Speed: 10 RPMs Dimensions: 50″ (L) x 38″ (W) x 40″ (H) Weight: 2500 lbs. Hydraulic oil c...
ROD CHOMPER BRE14
Motor: 20 HP Voltage: Any voltage 3 phase Cycle: 50 or 60 Bending Table Height: 36″ Bender Speed: 0-15 RPMs Dimensions: 58″ (L) x 52 ” (W) x 40″ (H) Weight: 2800 lbs. Hydraulic oil capacity: 35 gal...
ROD CHOMPER BRE18
ENGINE 30 hp. Electric Motor Voltage: Any voltage 3 Phase Cycle: 50 or 60 Bending Table Height: 38″ Bender Speed: 0-15 RPMs Dimensions: 71″ (L) x 54″ (W) x 40″ (H) Weight: 4100 lbs. Hydraulic oil c...
ROD CHOMPER BRE6
Motor: 2 HP Voltage: Single or 3 phase Cycle: 50 or 60 Bending Table Height: 36″ Bender Speed: 10 RPMs Dimensions: 28″ (L) x 18″ (W) x 34″ (H) Weight: 400 lbs. Hydraulic oil capacity: 11 gallons F...
ROD CHOMPER BRE8
Motor: 5 HP Voltage: 220v single phase/any voltage 3 phase Cycle: 50 or 60 Bending Table Height: 36″ Bender Speed: 10 RPMs Dimensions: 50″ (L) x 36″ (W) x 40″ (H) Weight: 1200 lbs. Hydraulic oil ca...
ROD CHOMPER BRG18
ENGINE 32 HP Kobota 3 CYL. LIQUID COOLED Turbo Diesel Voltage: 12 Volt Cycle: NA Bending Table Height: 38″ Bender Speed: 0-15 RPMs Dimensions: 84″ (L) x 64″ (W) x 44″(H) Weight: 4300 lbs. Hydraulic...
ROD CHOMPER C11PGBR18D
Portable Cutter Bender Rotary Turbo Diesel 18 bar Dual Control, Multi Directional(reference #38) Dual Control (2 person simultaneous operation) Motor: 32 HP Kubota 3 cylinder Liquid cooled Turbo Di...
ROD CHOMPER CB11
Motor: 10 HP Voltage: 220v Single Phase / Any voltage 3 phase Cycle: 60 Cycle Cut Height: NA Bending Table Height: 34″ Bender Speed: 20Ft bar in app. 15 seconds Cutter Cycle Time: NA Dimensions: 48...
ROD CHOMPER CB6
Motor: 5 HP Voltage: 220v single phase/any voltage 3 phase Cycle: 60 Cycle Bending Table Height: 34″ Bender Speed: 20Ft bar in app. 15 seconds Dimensions: 48″ H x 48″ W x 48″ D Weight: 1250 lbs Hyd...
ROD CHOMPER CB9
Circle/Radius Bender 9 Bar (reference #28) Motor: 7.5 HP Voltage: 220v single phase/any voltage 3 phase Cycle: 60 Cycle Cut Height: NA Bending Table Height: 34″ Bender Speed: 20Ft bar in app. 15 se...
ROD CHOMPER CBE11HSLS
Push Style Cutter Bender Electric 11 bar Long Stroke (reference #21) Motor: 10 HP High Speed Voltage: 220v single phase/any voltage 3 phase Cycle: 50 or 60 Cut Height: 31″ Bending Table Height: 36...
ROD CHOMPER CBE6
Push Style Cutter Bender Electric 6 Bar (reference #19) Motor: 1.5 HP Voltage: 120v-220 Single Phase Cycle: 50 or 60 Cut Height: 29″ Bending Table Height: 34″ Cutter Cycle Time: 4 Seconds Bender Sp...