HERBORN VBS 250
V ertical - B esprüht - S puler Spools: 250mm - 400mm Finished wire Ø: 0.03-0.10mm Number of moves: 25 Pairs of cones: 3
HERBORN VBS 400
V ertical - B esprüht - S puler Spools: 250mm - 400mm Finished wire Ø: 0.03-0.10mm Number of moves: 25 Pairs of cones: 3
RUFF HKW ON LW90 BASE
The edge winding technology on an LW90 was created and based on a semi-automatic machine version. Due to the high level of experience, the technology could be implemented by using of special wire g...
RUFF HKW-R
The HKW-R is a heavy duty special floor winder. This design is a special construction for edge winding applications with not round geometrics inside of the winding product. The HKWR is a very speci...
RUFF HKW800 FULL AUTOMATIC
The HKW800 automatic machine is the advancement of the semi-automatic version. It processes the flat wire from the supply spool to the finished winding. The system is equipped with a wire dereeling...
RUFF HKW800 SEMI AUTOMATIC
The HKW 800 is a heavy duty floor winder, with a welded iron body. This design is special constructed for edge winding applications. This machine can be used for edge winding product with round geo...
RUFF KWM DET
Detection, marking and cutting machine This machine is used for continuous marking and cutting of fl exible or rigid round or fl at materials. It is suitable for extruded cables without internal s...
RUFF KWM EXECUTIVE
This automatic high speed spiral winding machine is designed for continuous winding onto endless carrier material with permanent wire pitch or several different lengths with each independent pitch.
RUFF KWM EXECUTIVE S
Special spiral winding machine with automatic pitch change and automatic copper wire insertion function This automatic high speed winding machine is designed for continuous winding onto endless ca...
RUFF LW05
The LW05 is a light designed bench top machine with an integrated electrical cabinet for all type of linear winding applications. Given small dimension and light construction, it can easily be carr...
RUFF LW10
The LW 10 and LW 11 are light designed bench top machines with a separate electrical box for all type of linear winding applications. Given small dimension and light construction, it can easily be ...
RUFF LW1000
The LW 1000 is a big heavy duty floor winder, with a welded iron body. This design is for very heavy applications with very strong wires. Required speed and torque range can easily be changed by th...
RUFF LW11
The LW 10 and LW 11 are light designed bench top machines with a separate electrical box for all type of linear winding applications. Given small dimension and light construction, it can easily be ...
RUFF LW120
The LW 120 is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required speed and torq...
RUFF LW120-RS
The LW 120-RS / LW 180-RS is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required...
RUFF LW15
The LW 15 and LW 16 are bench top machines for all general and high precision linear winding applications. Required speed and torque range can easily changed by the pre installed transmission gears...
RUFF LW150
The LW 150 is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required speed and torq...
RUFF LW150 PROGRESSIVE
The LW150-progressive-wire-winding-machine is used to wind high voltage coils for distribution transformers. Simultaneously to the wire winding the layer insulation is built up either cylindrically...
RUFF LW16
The LW 15 and LW 16 are bench top machines for all general and high precision linear winding applications. Required speed and torque range can easily changed by the pre installed transmission gears...
RUFF LW180-RS
The LW 120-RS / LW 180-RS is a heavy duty floor winder, with a welded iron body. This design is for heavy and high precision linear winding applications with primary and secondary winding. Required...
RUFF LW20
The LW 20 and LW 21 are small designed bench top machine for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed t...
RUFF LW21
The LW 20 and LW 21 are small designed bench top machine for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed t...
RUFF LW25-S
The LW 25-S are our high top machine for all general and high precision linear winding applications. The speed up to 12.000 rpm is one of the high lights. The machine base is welded and after with ...
RUFF LW30
The LW 30 is designed for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the pre installed transmission gears. The LW 30 is a t...
RUFF LW45
The LW45 is designed for all general and high precision linear winding applications. Required speed and torque range can easily be changed by the 2 step switch gear box, moreover the belt ratio can...
RUFF LW90
The LW 90 is a sturdy table winder for all high precision linear winding applications, with primary and secondary winding. Required speed and torque range can easily be changed by the 2 step switch...
RUFF MINI BASIC
The MINI-BASIC and MINI-Basic-Plus is a very good value machine with an user frendly controller. The machine is designed for mass production of small toroidal cores. It is easy to set up the machin...
RUFF MINI BASIC PLUS
The MINI-Basic-Plus brings all the advantages of the Mini-Basic and also has advanced functions in the controller. In addition to programming of the pitch in mm, the machine has a calculation funct...
RUFF PULL WINDING MACHINE
The PWM is a toroidal core winding machine based on hook winding technology. Currently only one model is offered. Here, a simple control with a two-line text display is used. The pitch of this mach...
RUFF RW55 EVOLUTION
The machine bases are available in two versions: RW 55-Evolution with a fixed winding head and RW 55-Evo-Shuttle with a moveable winding head. The machine base in Shuttle-Version has a slide system...
RUFF RW55 EVOLUTION SHUTTLE
The machine bases are available in two versions: RW 55-Evolution with a fixed winding head and RW 55-Evo-Shuttle with a moveable winding head. The machine base in Shuttle-Version has a slide system...
RUFF RWE ADVANCE
The RWE-Advance is a sophisiticated machine model with a userfriendly graphical display. By programming of the winding application, the controller calculates the loading turns, pitch and number of ...
RUFF RWE BASIC
The RWE-BASIC is a simple machine. It is developed for the mass production of simple winding jobs. This machine is perfect for winding jobs, which allows some tolerances in the pitch. The RWE-BASIC...
RUFF RWE EASY
The RWE-Easy is for simple applications and is developed for the mass production. The userfriendly programming of the machine allows a short programming and quick start of the machine. The machine ...
RUFF RWE EVOLUTION
The RWE-Evolution is the high end bench top toroidal winding machine base from RUFF. The new controller with innovative programming is user friendly and through the high resolution touch screen dis...
RUFF RWE GLOBAL
The RWE-Global is for standard winding applications. The new NC controller with touch screen panel is user friendly and it is very easy to understand. Just a few inputs are needed for create a wind...
RUFF WWM EXECUTIVE
Heavy duty spiral winding machine for large wires and big wire spools This automatic high speed spiral winding machine is designed for continuous winding onto endless carrier material with permane...
RUFF WWM-16
Heavy duty spiral winding machine for up to 16 winding wires This automatic high speed spiral winding machine is designed for continuous winding of 16 wires onto endless carrier material with perm...