MAKINO EDFH-1
Makino now offers a high-accuracy fine-hole machining configuration on the ultra-precision EDAC-1 sinker EDM platform. The EDFH1 is a re-configured EDAC-1 machine that incorporates a fine-hole mach...
MAKINO EDAF2-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDAF3-FH
Makino builds on the existing capabilities and features of its proven EDAF-Series sinker EDM machines by adding a special fine-hole machining configuration that is used to produce high-accuracy EDM...
MAKINO EDBV3
The newly developed water-based EDBV3 (Electrical Discharge Blades and Vanes) machine has been specifically designed for blade and vane machining in the aerospace and power generation industries. T...
MAKINO EDBV8
The newly developed water-based EDBV8 (Electrical Discharge Blade and Vane) machine has been designed to produce the cooling and shaped diffuser holes for gas turbine engines for the Aerospace and ...
MAKINO BX3
The Makino BX3 machine is purpose-built for the EDM Drilling demands of high volume production applications of cooling film hole features that are found in Blade and Vane turbine engine components....
MAKINO EDNC17
The EDNC17 offers the same utility and capability as the smaller EDNC15 machine, but provides larger X/Y strokes and a larger work tank area. Excellent access to the Work Zone is provided with the...
MAKINO EDAF2
The EDAF2 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDAF3
The EDAF3 sinker EDM boasts a new mechanical design intended to increase rigidity and reduce thermal distortion, especially for machines installed in uncontrolled environments or used over the cour...
MAKINO EDGE3I
The advanced technologies and intelligent design of the EDGEi-Series machines deliver an unparalleled value, capability, and reliable productivity to Sinker EDM operations. The EDGE3i machine provi...
MAKINO EDGE2I
The EDGE2i machine brings an effective combination of high performance and versatility to Sink EDM operations. The EDGEi-Series machines are configured with many productive technologies to efficien...
MAKINO EDNC21
MAKINO EDNC20
MAKINO EDNC15
MAKINO EDNC10
MAKINO EDNC8
MAKINO EDNC6
MAKINO EDAC1
The world’s most accurate Ram EDM, Makino’s EDAC1, is capable of producing corner radii of 0.00019 inches (0.005mm) and surface finish quality of 0.000024 inches (0.6 micron) Ry. This machine achie...
MAKINO UPV-5
The UPV-3 and UPV-5 ultra-high-precision WEDM machines are designed with an oil dielectric system for precision machining of carbides and other hardened materials used in the manufacturing of tooli...
MAKINO U3
Makino’s new U3 and U3 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U6I
High Precision Wire EDM. The productive versatility of High Speed, High Accuracy, and Fine Surface Finish capabilities on a large platform Wire EDM machine make the U6i a standout winner for any shop.
MAKINO U3 H.E.A.T
Makino’s new U3 and U3 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U53J
Makino’s Uj-Series of WEDM machines, the U32j and the U53j, take accuracy and finish capabilities to a higher level. Targeted to applications in precision plastic injection molds, engineered plasti...
MAKINO U6
Makino’s new U6 and U6 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U6 H.E.A.T
Makino’s new U6 and U6 H.E.A.T. wire EDM machines redefine the expectations of versatility and user-friendliness that matter to the EDM industry. The features and technologies incorporated into the...
MAKINO U1310
MAKINO UP6 H.E.A.T
The UP6 H.E.A.T. Wire EDM is designed for Ultra Precision machining, and is capable of achieving work piece positional accuracies of 1 micron (0.00004”) over its entire travel. This level of preci...
MAKINO U6 H.E.A.T. EXTREME
The Makino U6 H.E.A.T. Extreme Wire Electrical Discharge Machine (Wire EDM) is the fastest in the industry. Its innovative EDM technology uses a 0.016” (0.400mm) coated wire to achieve the fastest ...
MAKINO U3I
The U3i Wire EDM harnesses an unparalleled combination of productivity and efficiently for the most demanding work: High Speed Machining and Fine Surface Finish capability with greater Precision!
MAKINO UPN-01
The UPN-01 represents the next leap forward in technology for ultra-precision machining and surface finish capability of small/fine wire operations. The machine features a unique horizontal wire dr...
MAKINO UPV-3
The UPV-3 and UPV-5 ultra-high-precision WEDM machines are designed with an oil dielectric system for precision machining of carbides and other hardened materials used in the manufacturing of tooli...
MAKINO U86
A part of Makino’s award-winning U-Series of wire EDM machines, the U86 relies on advanced generator technology for significantly faster cycle times while achieving superior surface finishes and wo...
MAKINO U32J
Makino’s Uj-Series of WEDM machines, the U32j and the U53j, take accuracy and finish capabilities to a higher level. Targeted to applications in precision plastic injection molds, engineered plasti...
MAKINO A99E
Ideally suited for manufacturing in the diesel engine block, transmission and semiconductor markets, the A99E accepts loads up to 4,400 lbs., with an optional upgrade to 6,600 lbs. (3,000 kg). A 40...
MAKINO MAG1
Aerospace Part Production on the MAG1 A 5-axis horizontal machining center, the MAG1 is specifically designed for high-productivity machining of complex aluminum monolithic parts for aerospace. It...
MAKINO MAG3
MAG3 Built for Aerospace Machining The MAG3 5-axis horizontal machining center is specifically designed for high-productivity aerospace machining of complex aluminum monolithic parts. It integrate...
MAKINO a82M
a82M HMC for Titanium Milling The a82M horizontal machining center is designed for milling tough, hard materials. It is ideally suited for large-diameter boring and face milling on materials such ...
MAKINO A61NX
The a61nx is a 500mm, 40-taper production horizontal machining center. The a51nx and a61nx share key machine technologies that take part productivity, accuracy and machine reliability to the next l...
MAKINO A81NX
Large Parts...Large Features The a81nx is Makino’s next generation 630mm horizontal machining center. It builds on the industry leading performance of its predecessor with new design elements foc...
MAKINO J3
Designed for flexible transfer lines, the J3 is primarily intended for the economic machining of mass-produced aluminum automotive parts. Its high spindle speed and excellent accuracy make it the p...
MAKINO MCC2013-VG
The MCC2013-VG HMC is the complete package for high-efficiency mold machining with features that enable multi-face machining in a single setup. These include a high-speed 15,000 min-1 spindle, 16m/...
MAKINO MCC2513
The MCC2513 HMC is the complete package for high-efficiency machining of large dies/molds with features that enable multi-face machining in a single setup. These include a high-speed 15,000 min-1 s...
MAKINO MAG3.EX
The MAG3.EX 5-axis horizontal machining center is specifically designed for high-productivity machining of complex aluminum monolithic parts for aerospace. It integrates spindle speed and power wit...
MAKINO A7
The A7 5-axis horizontal machining center is built specifically for high-efficiency machining of large, complex aluminum monolithic aerospace parts. Its design is based on the widely successful MAG...
MAKINO MCD1516-5XA
A 5-axis control horizontal machining center, the MCD1516-5XA features multiface indexing of large workpieces and simultaneous 5-axis control for high-speed, high-accuracy machining. It comes stand...
MAKINO MCD2016-5XA
A 5-axis control horizontal machining center, the MCD2016-5XA features multiface indexing of large workpieces and simultaneous 5-axis control for high-speed, high-accuracy machining. It comes stand...
MAKINO MCD2516-5XB
A 5-axis control horizontal machining center, the MCD2516-5XB features multiface indexing of large workpieces and simultaneous 5-axis control for high-speed, high-accuracy machining. It comes stand...
MAKINO N2-5XA
A 5-axis horizontal machining center, the N2-5XA is specifically designed for high-productivity, near-net-shape machining of medical parts and high-volume die cast components. Its twin direct-drive...
MAKINO T1
T1 5-Axis Horizontal Machining Center: Performance and Capabilities for Any Shape and Any Material Today’s premium job-shop market requires flexibility. The ability to efficiently machine a wide v...
MAKINO T4
Makino’s new T4 5-axis horizontal machining center dramatically increases titanium milling efficiency, combining lean manufacturing methods and increased metal-removal rates for today’s aerospace a...