10 Görünen Model
thumb

HACO COMBI 220/6

The COMBI has a notching capacity of 6mm, a blade length of 220mm and has variable angle between 30 and 140 degrees. Several adjustable stops come standard with a second set of blades. A rectangul...

Azami Kalınlık:6.0 in
1 fotoğraf
thumb

HACO MAXI 250/6

The MAXI series are fixed 90 degree with 6mm mild steel notching capacity. This MAXI can notch a 90 degree angle in 6mm mild steel with maximum length of 250mm. The MAXI model has a large working t...

Azami Kalınlık:0.236 in
1 fotoğraf
thumb

HACO MINI 220/4

This MINI can notch a 90 degree angle in 4mm mild steel with maximum length of 220mm. The MINI has a large working table with 2 adjustable quick set stops and scales. The blade area is covered with...

Azami Kalınlık:0.158 in
Azami Kalınlık (gösterge):10.0 ga
Hazır Boyut (X):8.6 in
1 fotoğraf
thumb

HACO VARI 220 / 6

Azami Kalınlık:0.236 in
Hazır Boyut (X):0.236 in
1 fotoğraf
thumb

HACO VARI 220/6

The high precision VARI uses a specially designed system to adjust top and bottom blade simultaneously. This means that the VARI notcher has an adjustable notching angle between 30-140 degrees. Thi...

Azami Kalınlık:0.236 in
1 fotoğraf
thumb

KNUTH KAM 250

•The KAM 250 fixed-angle notches features a compact design and long cutting length •The powerful hydraulic drive and heavy, rigid construction allow machining of up to 0.3 in thick plates •Automati...

Azami Kalınlık:0.3 in
Hazır Boyut (X):10.0 in
1 fotoğraf
Brochure
thumb

KNUTH RAX

Motorized Tube Notcher for continuous operation with 2 Hp electric motor

Azami Kalınlık:0.12 in
1 fotoğraf
thumb

LOCKFORMER ROTO NOTCHER

Dove-tail notch out of 24 to 30 gauge galvanized — in only one pass! Just cut to width and length or use scrap. This machine uses either 3" or 6" width blanks with simple adjustment.

Azami Kalınlık:0.012 in
Azami Kalınlık (gösterge):30.0 ga
1 fotoğraf
thumb

LOCKFORMER SPEEDNOTCH 16

Speednotch allows you to gang-notch sheet metal hydraulically up to 600% faster than by hand, without layout or scribing. It’s the perfect tool for preparing ductwork to receive bar, slip or “S” a...

Azami Kalınlık:0.06 in
Azami Kalınlık (gösterge):16.0 ga
1 fotoğraf
thumb

LOCKFORMER TDC NOTCHER

TDC NOTCHER comes standard with 5 notching heads. The Lockformer TDC NOTCHER will gang notch duct blanks as much as 6 times faster than notching by hand. The Hydraulic powered notch units have in...

Azami Kalınlık:0.063 in
Azami Kalınlık (gösterge):16.0 ga
1 fotoğraf