DAKE JH10W1

Heavy duty, American made, horizontal bandsaw with a dual cast head frame for large capacity cutting. Also featuring a three point suspension, adjustable eccentric roller blade guides, centralized ...

DAKE SAR 331 SA

DAKE SAR 440 SA

DAKE SE 10 DM

Heavy duty, dual mitering saw that comes with one standard Bi-metal blade. Hydraulic controlled downfeed with automatic shut off at the end of the cut. 2.75HP, 220V motor with up to 60°right miteri...

DAKE SE 5X6 RCT

This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go appli...

DAKE SE 6.5 M

Mitering bandsaw with dual operating modes and hydraulic controlled down feed. 2.5HP, 120V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Vari...

DAKE SE-5X8

This benchtop horizontal bandsaw is small in size but not in power. Designed for on-the-go applications this saw will cut all of the metal rounds, flats, and tubes you need right in the field. Offe...

DAKE SE-810

DAKE SE712

Standard Duty horizontal bandsaw offering accurate cutting, rugged gear box, hydraulic control, chip brush blade cleaner, and wet or dry cutting with simple operation.

DAKE SE912

HEM 260 BSA

The 260 is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter, includes an adjustable hard-stop to cut multiple same-length parts, and has a built-in flood coolant syste...

HEM 320 BSA

The 320 BSA is a double-mitering band saw cutting 45ᵒin both directions, up to 60ᵒ left miter. The control is connected by a 40” umbilical cord and blade speed adjusts approximately 39 to 320 SFPM....

HEM 782XLH

The 782XLH is a versatile benchtop band saw and will cut in the upright position with an optional “work table”, will miter up to 45ᵒ in one direction in the horizontal position, and includes a hard...

HEM ABS-105

The ABS-105 is a benchtop band saw with the ability to cut miters up to 45ᵒ in one direction in the horizontal position. A two-speed motor powers a ¼” blade and the saw operates in semi-automatic m...

HEM ABS-NG120XL

The ABS-NG120XL will cut in manual pull-down or semi-automatic modes and can miter-cut up 60ᵒ in one direction. The ¼” blade is powered by a 1.7 HP variable speed motor, and a hard-stop for cutting...

HEM ABS-NG160

The ABS-NG160 benchtop band saw will miter-cut up to 45ᵒ in one direction. It will cut with manual pull-down or semi-automatic modes. A ½” wide blade is powered by a 2.7 HP motor and a hard-stop is...

HEM CYCLONE A-4

The Cyclone A-4 makes cutting 45ᵒ miter cuts in one direction perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts in longer than 24...

HEM CYCLONE A-C

Product Description The Cyclone A-C multiple indexes with a 24” bar-feed, saves up to 99 jobs, sawing one job or multiple jobs of differing lengths and quantities in sequence. Each job includes job...

HEM CYCLONE M

Product Description The Cyclone M miters to 60ᵒ one direction, is ideal for cutting solids and structural shapes with a 1¼” blade and 7½ HP motor. The control console, mounted on a swing arm, allow...

HEM H105A-4

The H105A-4 model includes a 7½ HP motor and a 1¼” blade with a 24” stroke bar-feed that will index up to 4 times cutting up to 999 parts of the same length. This scissor style saw is perfect for c...

HEM H105A-C

The H105A-C includes a 24” bar-feed and allows multiple indexes and the ability to create and save up to 99 jobs. Each job includes a job number, the part length, and quantity and runs consecutive ...

HEM H105LA-4

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (4 Indexes) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic

HEM H105LA-C

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Bar-feed: 0-24″ (Multiple Index) Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Automatic

HEM H105LM

Horizontal Pivot Band Saw Capacity: 20″ W x 16″ H Blade: 15’8″ x 1.25″ x .042″ Motor: 7.5 HP Operation: Manual/Semi-Automatic

HEM H105M

The H105M model includes a 7½ HP motor and a 1¼” blade and will produce straight cuts fast. This saw is perfect for cutting solids and structural shapes. Adjustable clamping pressure and accurate a...

HEM H130HA-9

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H Capacity: 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic

HEM H130HA-C

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Bar-feed: 0-24″ (Multiple Index) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic

HEM H130HM-1

Horizontal Pivot Band Saw Capacity: 20″ W x 10″ H 16″ W x 16″ H (Square) Blade: 17’0″ x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi-Automatic

HEM H90A-1

The H90A-1 offers accurate cuts on small solids and shapes. It is perfect for cutting multiple parts of the same length up to 24” long automatically. This simple to use scissor-type band saw has a ...

HEM H90A-4

The H90A-4 offers up to 4 indexes 24” each and will cut up to 999 same-length parts. The H90A-4 gives fast accurate cuts on small solids and shapes. It is perfect for cutting multiple parts of the ...

HEM H90A-C

The H90A-C includes a 24” bar-feed, allows multiple indexes, and the ability to create and save up to 99 jobs. Each job includes a job number, part length, and quantity and it runs consecutive job ...

HEM HURRICANE 2030A

Horizontal Miter Band Saw Capacity: 30″ W x 20″ H Miter: 20″ W x 20″ left @ 45° Miter: 13″ W x 20″@ 60° Bar-feed: 0-34″ (Multiple Index) Blade: 20’6″ x 1.5″ x .050″ Hydraulic Motor: 5 HP Motor: 10...

HEM HURRICANE 2030A-CTS

The Hurricane 2030A-CTS band saw allows programmable miter cuts up to 60ᵒ in one direction. A touch screen control is mounted in a swing-away console for settings, operational functions, and diagno...

HEM HURRICANE 2030M

The Hurricane 2030M band saw miter cuts up to 60ᵒ in one direction. A touch screen control is mounted in a swing-away console for settings, operational functions, and diagnostics. The control allow...

HEM N215XL

Utility Band Saw Capacity: 7.7″ W x 5″ H 6.6″ (Round) Miter: 5.9″ W x 4.3″ left @ 45° Miter: 3.9″ W x 2.9″ left @ 60° Blade: 7’0-1/4″ x .75″ x .035″ Operation: Manual

HEM NG120XL

The NG120XL band saw is our most popular benchtop model and miter-cuts up to 60ᵒ in one direction, is powered by a 1.7 HP variable speed motor, and includes a hard-stop for cutting multiple parts t...

HEM NG160

The NG160 benchtop band saw is powered by a 2.7 HP variable speed motor. It will cut miter angles up to 45ᵒ in one direction. The NG160 uses a ½” wide blade, is a manual pull-down saw, and includes...

HEM SIDEWINDER A-1

Horizontal Miter Capacity: 16″ W x 12.75″ H Miter: 10″ W x 10″ left @ 45° Bar-feed: 0-24″ (Single Index) Blade: 13’6″ x 1″ x .035″ Motor: 3 HP Operation: Automatic

HEM SIDEWINDER A-4

Product Description The Sidewinder A-4 cuts 45ᵒ miters in one direction and is perfect for cutting small solids and shapes. With a 24” indexing bar-feed and up to 4 indexes, cutting multiple parts ...

HEM SIDEWINDER M

The Sidewinder M saw cuts miters up to 60ᵒ in one direction and is ideal for cutting small solids and structural shapes. The control allows semi-automatic sawing with the Cutting Force, adjustable ...

HEM SIDEWINDERE A-C

Horizontal Miter Band Saw Capacity: 16″ W x 12.75″ H Miter: 10″ W x 10″ left @ 45° Bar-feed: 0-24″ (Multiple Index) Blade: 13’6″ x 1″ x .035″ Motor: 3 HP Operation: Automatic

HEM WF130HA-DC-C

Wide Flange Band Saw Capacity: 27″ W x 18″ H Bar-feed: 0-72″ (Multiple Index) Blade: 21’10” x 1.5″ x .050″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Automatic

HEM WF130HM-DC

HEM WF140HM-DC

Wide Flange Band Saw Capacity: 44″ W x 20″ H 21″ (Round) Blade: 28’6″ x 2″ x .063″ Hydraulic Motor: 2 HP Motor: 10 HP Operation: Manual/Semi Automatic

HEM WF160LA-DC-C

Wide Flange Band Saw Capacity: 30″ W x 25″ H Bar-feed: 0-72″ (Multiple Index) Blade: 26’9″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Automatic

HEM WF160LM-DC

Wide Flange Band Saw Capacity: 30″ W x 25″ H Blade: 26’9″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi-Automatic

HEM WF190LA-DC-C

Wide Flange Band Saw Capacity: 44″ W x 25″ H Bar-feed: 0-72″ (Multiple Index) Blade: 29’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Automatic

HEM WF190LM-DC

Wide Flange Band Saw Capacity: 44″ W x 25″ H Blade: 29’0″ x 2″ x .063″ Hydraulic Motor: 5 HP Motor: 15 HP Operation: Manual/Semi Automatic

HEM WF190MRB-DC

The WF190MRB-DC is a powered double-miter band saw operated using a touch screen mounted in a pedestal control console and cuts miter angles 45ᵒ in one direction and up to 60ᵒ the other direction. ...