AMADA WASINO J1
AMADA WASINO J1
2008 Amada Wasino J1 CNC Lathe, Carousel Loader, Part Flipping Station, Chip Conveyor
BUDERUS 235 MA
Largest workpiece diameter: 150 mm Max. workpiece diameter: 280 mm Largest swing diameter above the table:200 mm Height of the workpiece spindle above the floor: 1250 mm Workpiece spindle speeds NC...
CNC NEW, INC. GT-ISL50
2016 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
CNC NEW, INC. GT-ISL50
2014 CNC New GT-ISL50 CNC turning center. Machine is in very good condition and can be inspected under power as needed. Machine has a gang style turret.
COLCHESTER TORNARDO T4
LNS SUper Hydrobar feeder Tooling Vdi 40 system Chip conveyor Collet device with inserts Running hours 4500 H Max. turning Ø:230mm X-Axis: 200mm Z-Axis: 450mm Spindle bore: 61mm Sp...
DMG MORI NLX4000AY/750
CNC Lathe
DOOSAN LYNX 2100LSY
With FANUC i-Series CNC Control, Chip Conveyor, Coolant System, Sub Spindle, LNS Bar feeder & Tool Pre-setter
DOOSAN LYNX 2100LSY
Live Tool, Sub Spindle, Bar Feed, Tool Presetter, Mist-Fit MF-550, 3 Jaw Chuck, Fanuc i Series CNC
DOOSAN LYNX 2100LSY
CNC Lathe
DOOSAN LYNX 2100LSYA
CNC Lathe
EMAG VL 1 TWIN
This twin-spindle turning machine is perfect for the manufacturing of workpieces up to 75mm (3in) in diameter. With two main spindles in one machining area, the VL1 TWIN can simultaneously machine ...
EMAG VL 1 TWIN
This twin-spindle turning machine is perfect for the manufacturing of workpieces up to 3 inches in diameter. With two main spindles in one machining area, the VL 1 TWIN can simultaneously machine t...
EMAG VL 1 TWIN
This twin-spindle turning machine is perfect for the manufacturing of workpieces up to 3 inches in diameter. With two main spindles in one machining area, the VL 1 TWIN can simultaneously machine t...
EMAG VL 5I
Emag VL5i Single Spindle Live Tool Vertical Turning (2) Machine Cell (2016)
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
EMAG VSC 250 DDS
EMAG Reinecker VSC-250-DDS, 10.23" Swing, 12-Sta. Turret, Grinding Spindle, Parts Loader, Siemens CNC, #32337
EUROTECH 710SLL
1998 Eurotech Elite 710SLL Quattroflex Multi-Axis CNC Lathe, C-Axis, Live Tooling, High-Pressure Coolant, Coolant Filtration System, Bar Feeder, Programmable Parts Catcher, Boring Bar Holders, Chip...
FUJI CSD-300
10,238 Cut hours (2) Available. The CSD-300 Twin Spindle Lathe features parallel twin two spindle CNC lathes with both Z- and X-axis box way slides for heavy cutting, superior surface finish and l...
HAAS DS-30SSY
2014 Haas DS-30SSY Multi-Axis CNC Lathe, Sub-Spindle, Live Tooling, Y-Axis, C-Axis, 10" And 8" Hydraulic Chucks, Quick-Change Collets, Bar Feeder, Mist Collector, Chip Conveyor
HARDINGE CONQUEST GT27
Nice low hour Silicon Valley Machine
HARDINGE CONQUEST GT27
Hardinge Conquest GT27 General Precision CNC Gang Style Lathe with Fanuc 21T CNC Control. with parts catcher Barfeed may be available depending on agreed price. CALL NOW 230 volt - 60 cycle - 3 phase
HARDINGE CONQUEST GT27SP
HARDINGE, CONQUEST GT27SP, CNC, GANG TOOL, LATHE, GE FANUC ,18i, CNC CONTROL, 5C SPINDLE, 230/3/60, 35 KVA, S/N GTL-153-18 WITH LOADER
HARDINGE CONQUEST GT27SP
Hardinge Conquest GT27SP CNC Gang Tool Lathe equipped with Fanuc 18iT CNC Control including parts catcher and air blast. Machine also features C axis on the control. Machine voltage is 230 volt - 6...
HARDINGE CONQUEST GTSP
Hardinge Conquest GT27SP Gang Tool CNC Lathe with Autodoor and chip removal system and air blast Fanuc 18T CNC Control
HARDINGE CS-GT
For sale: Hardinge Conquest GT CNC Lathe, used condition, 2-axis, 11.76" swing, 5 hp, 6,000 RPM. Includes GE Fanuc 18-T Control, chip conveyor, gang tooling cross-slide, and parts catcher. 5,500 cu...
HARDINGE CS-GT
Explore our Hardinge Conquest GT CNC Lathe! With an 11.76" swing, dual-axis control, 6" chuck, and 1.062" bar capacity. Reliable 5 hp motor, max 6,000 RPM. Features GE Fanuc 18i-T, gang tooling, an...
KITAKO HS4200
2013 Kitako HS-4200 with Fanuc OiTD CNC Control and Fanuc Dual Robot Integrated Installed Robotic Part Loaders and All Input-Output Conveyors Systems and Flexible Post Process Gauging Systems and a...
LEADING EDGE INDUSTRIAL HX710
The HX710 Turning Center (TC) is a compact, yet incredibly versatile, totally enclosed, Benchtop CNC lathe, suitable for all skill levels. The small footprint of the HX710 TC allows it to comfortab...
MAZAK INTEGREX 300-2Y
2001 Mazak Integrex 300-2Y Multi-Axis CNC Lathe, 10000 RPM Milling Spindle, Y-Axis, B-Axis, Tool Presetter, Chip Conveyor
MAZAK QUICK TURN 8N
Mazak QT-8N CNC Lathe, 1994 – Tailstock Ready, Chip Conveyor
MIYANO BNE-34S3
Miyano BNE-34S3 2 Turrets, 2 Spindles,
MORI SEIKI NT-1000WZM
Multi Tasking, Twin Turret, Twin Spindle, Live Tool, MSX 711 IV CNC Control Bar Feed
MURATEC ML400
Muratec Model ML 400G CNC turning centers . machines are specially equipped with Optional heavy duty A/C spindle motors, tailstocks, single turrets, Gantry loaders, part holders, chip conveyors, to...