SANJIA TS2120
- SpecMetrik Özellikleri dönüştürmeDelme çapı3.1496"Derinlik Delme472.44"KontrolCNC (SIEMENS OR FANUC)
- Ürüne Genel Bakış
The basic process performance of machine:
1)The machine can finish inner hole drilling ,boring,expanding, roller pressuring. In processing, the workpiece rotates slowly, the tool rotates qucikly and feed, cutting fluid go into cutting area through sealing head(when drilling) or boring bar (when boring) to cool and lubricate the cutting area and take the chips away .
When drilling BTA inside chipsremoval is used. When boring cutting fluid moves to bed head side through boring bar and then take away cutting fluid and chips.
2) The machine has headstock. In processing tool rotate and feed, workpiece is fixed on Rectangle work platform which has a T Channel.
3)Machine accuracy
Drilling, precision of hole diameter IT9-11。 Surface roughness:Ra12.5-6.3
Rough boring , precision of hole diameter IT9-10。Surface roughness:Ra6.3
Precise boring:precision of hole diameter IT8-9。 Surface roughness:Ra3.2
Roller Pressing: Surface roughness:Ra0.2
Straightness of Processed hole: less than 0.15/1000mm。
Skew of processed hole less than 0.5/1000mm。
,processing efficiency of the machine
Skiving speed depending on tool structure, material and workpiece , usually between 50-100m/min。
Feeding speed:depending on processing situation, usually between 40-100mm/min。
Max processing Margin allowed when boring :depending on tool structure, material and workpiece , usually not more than 20mm.
4 ) processing efficiency of the machine
Skiving speed, depending on tool structure, material and workpiece , usually between 50-100m/min。
Feeding speed:depending on processing situation, usually between 20-100mm/min。
Max processing Margin allowed when boring :depending on tool structure,material and workpiece , usually not more than 20mm。
According to processing demand, drilling bar box or boring bar box can be installed to make tool rotate, decrease workpiece rotation speed to increase working efficiency and to make sure working quality.
Machine Series Features
Drill depth of 1-20M
Rack and pinion drive
Precision ground hardened guideways
Cast iron bed
Geared headstocks for high torque applications
Modern, efficient designMachine Configurations
Rotating workpiece, stationary tool
Rotating tool, counter-rotation workpiece
Rotating tool, stationary workpieceProcess
BTA/STS solid drilling
BTA/STS counter boring
Trepanning
Skiving and roller burnishingMachine Accessories
Precision pressure heads
Vibration dampener carriages
Workholding chucks
Workpiece roller steady
Hinged belt chip conveyor
Coolant chiller or heat exchangerTooling Accessories
Drill tubes
Drill tube clamps
Drill bushing systems
Tube seal packing glands
Vibration dampener cartridgesAdvanced Options
Fanuc or Siemens CNC
Lantern chuck for pull bore tooling
X-axis actuator for bottle boringCustomer Service
Factory training for machine & tooling
Foundation design & process planning
Installation and startup
Technical support via phone and internet machine connectionBasic Technical Parameters of TS2120 deep hole drilling &boring Machine :
Range of boring hole Dia Φ40-Φ200mm
Range of drilling hole Dia Φ30-Φ80mm
Max boring &drilling depth 12000m
center height from horizental rail to spindle center 450mm
Headstock spindle hole Dia 75mm
Front spindle taper hole 85mm,1:20
spindle rotation speed ,steps 40-670r/min 12 steps
feeding speed 5-300mm/min step less
carriage rapid moving speed 2.05m/min
clamping Dia of workpiece 100-300mm
main motor N=30kw, n=1460r/min
drilling bar box spindle hole dia 75mm
front spindle taper hole of drilling bar box 85mm,1:20
drilling bar box spindle rotation speed ,steps 80-350r/min 6 steps
feeding motor N=4.4kW AC servo
carriage rapid motor N=3kW,n=2880r/min
cooling pump motor N=5.5Kw,n=1460r/min 4groups
hydraulic pumo motor N=1.5kW,n=1440r/min
rated pressure of cooling system 2.5MPa
volume of cooling system 100,200,300,400l/min
rated pressure of hydraulic system 6.3MPa
Max. Axis force for sealing head: 68kN
Max. Clamping force by sealing head on work piece: 20kN
Guide way width: 650mm
- Şirket hakkında
Dezhou Sanjia Machine Manufacturing Co., Ltd., located in Dezhou Economic Development Zone, Shandong Province, designs, makes and sells general deep hole processing machine tools (including deep hole drilling machines, deep hole drilling and boring machines, and deep hole boring machines), as well as CNC deep hole drilling machines, CNC deep hole drilling and boring machines, and CNC deep hole powerful honing machines.