ARPEI HEM-500
Coraza: Acero al carbon A-36 Aislamento térmico: Fibrocerámica 4" Inducción térmica: Resistencias 16.5 kw/440v Control: PLC CROUZET Modelo: XD 26 16/10 24 VCD
DANIELI SINGLE LF
With one or two cars, equipped with inert roof supported on one side only for optimal accessibility With ladle lifting device between EAF and LF cars With ladle turret with independent arms, one he...
EFD HEATLINE FAR
Roll-over melting furnace Ideal for high-precision melting and pouring, and for investment casting applications. High-frequency power sources ensure short melt times (and eliminates oxidation). M...
EFD HEATLINE FIM
Moving coil melting furnace The FIM range of moving coil furnaces is ideal for melting copper, gold, bronze and aluminum alloys. FIM’s prefabricated crucible remains static during the full meltin...
EFD HEATLINE LAB
Laboratory melting furnace Our LAB range is specially designed for laboratory and research applications. Available with rammed linings or prefabricated crucibles, LAB is perfect for precious meta...
FURN-TECK ENGINEERS CRUCIBLE TYPE MELTING
These furnaces are suitable for HPDC / GDC shops where production rates are very low or metal quality is extremely crucial and only electric melting is requires. Being Batch type indirectly heatedf...
FURN-TECK ENGINEERS DIRECT BALEOUT TYPE MELTING AND HOLDING
These furnaces are suitable for HPDC / GDC shops where production rates are required upto 250Kg/Hr for single alloy. This furnace can also be used as central melting furnace for several GDC machine...
FURN-TECK ENGINEERS ELECTRICAL CRUCIBLE
1.Energy consumption < 10 Kwh to 11 Kwh for 500Kg holding furnace. 2.Easily replaceable SiC heaters without removing the cricible 3.PID controlled heating system with THYRISTER drive 4.Temperature ...
FURN-TECK ENGINEERS MELTING AND HOLDING FURNACE
Our Melting cum Holding furnaces are highly energy efficient and can be connected directly to the casting machine. The auto-ladle of pressure die casting machine can be used for baleout. For gravit...
FURN-TECK ENGINEERS REVERBRATORY SCRAP MELTING
SCRAP MELTING REVERBRATORY FURNACES are suitable for SCRAP RECYCLING / ALLOYING units where scrap will be charged in furnace and melted by using fuel fired burners. Prepared metal can be processed ...
FURN-TECK ENGINEERS TOP HEATED HOLDING
TOP HEATED HOLDING FURNACE Electrically Heated TOP HEATED HOLDING FURNACES are one of the most efficient HOLDING furnaces which consumes almost 50% less energy than conventional crucible type hold...
MELTEC IPC
An IPC is an integral part of an optimised and automated Magnesium casting process. Drying of ingots in the interest of safety avoids steam and hydrogen explosions. Consistent charging of material ...
MELTEC MDF
The MDF is designed to melt magnesium alloys and keep them warm, enabling a safe and precise dosing of the molten metal into the cold chamber die-casting machine. The MDF is produced as a crucible ...
MELTEC MDF200C
The MDF is designed to melt magnesium alloys and keep them warm, enabling a safe and precise dosing of the molten metal into the cold chamber die-casting machine. The MDF is produced as a crucible ...
MELTEC MDF400C
The MDF is designed to melt magnesium alloys and keep them warm, enabling a safe and precise dosing of the molten metal into the cold chamber die-casting machine. The MDF is produced as a crucible ...
MELTEC MMD
Because of the continuously growing application of Magnesium in modern consumer electronics and the automotive industry Magnesium diecasting and thus Magnesium melting and dosing systems become mor...
MELTEC PGM
In order to avoid any reaction of molten Magnesium with ambient air, melting furnace is designed and performed with a tight crucible cover and melting bath is protected by gas, which is mixed in th...
MELTEC ZRF
The ZRF is designed to remelt recycling material and to premelt ingots of zinc diecasting alloys under safe and stable production conditions. The melting furnace is heated with two heating register...