EVERTURN EV-100
Model mm (in) EV-100 Center height 585 (23") Swing over bed 1170 (46") Swing over cross slide: Full length (Std.) 860 (33") Swing over cross slide: Half length (Opt.) 1720 (67") Width of bed 1345 (...
EVERTURN EV-46
Model mm (in) EV-46 Center height 585 (23”) Swing over bed 1170 (46”) Swing over cross slide 860 (33”) Swing over gap 1720 (67”) Width of gap 570 (22”) (No gap if Distance between centers is longe...
SPARK CKW6663
JOHNFORD ST-240CX
EVERTURN EV-47
Model mm (in) EV-47 Center height 600 (24”) Swing over bed 1200 (47”) Swing over cross slide 830 (33”) Swing over gap 1750 (68”) Width of gap 600 (23”) (No gap if Distance between centers is longe...
FORTUNE PACIFIC PT450
1. Optimization design and refined refinement of all basic devices such as beds, spindles and tailstock sleeves for pretty-high accuracy and service life. 2. Usage of famous product on all key elem...
GURUTZPE G-OILFIELD
Gurutzpe has an experience of more than 15 yeard since the launch of this model specially designed in the machining and threading of pipes for the petrol drilling.
SPARK CKW6646
LIJEHON LBC-1200
ITEM LBC - 1200 CAPACITY Swing over bed 1200 mm Swing over saddle 750 mm Distance between center 2000 ~ 10000 mm Z-axis travel 1700 ~ 9700 mm HEADSTOCK ...
LIJEHON LBM-1200
ITEM LBM - 1200 CAPACITY Swing over bed 1200 mm Swing over saddle 820 mm Distance between center 2000 ~ 15000 mm HEADSTOCK No. of spindle speed 12 steps Spind...
LIJEHON LDC-1200
ITEM LDC - 1200 CAPACITY Swing over bed 1200 mm Swing over saddle 800 mm Distance between center 2000 ~ 6000 mm Z-axis travel 1700 ~ 5700 mm HEADSTOCK No. of ...
ANYANG XINSHENG QKA1246
FORTUNE PACIFIC PT340
1. PT340 CNC Pipe Threading works with high accuracy, low noise and long service life. The minimum set unit is 0.001 mm, and the repeatability accuracy of X-axis is 0.016 mm, Z-axis 0.020 mm. The s...
FORTUNE PACIFIC PT430
1. PT430 CNC Pipe Threading works with high accuracy, low noise and long service life. The minimum set unit is 0.001 mm, and the repeatability accuracy of X-axis is 0.016 mm, Z-axis 0.020 mm. The s...
J & W SGZ1336Z
MEGABORE CN-50
Hollow spindles available 7 inch to 32 inch Swing over Bed 50"-60-70-80 inch BED 3 Shear Width mm (in.) 1100 (43.31) CARRIAGE Width of cross slide mm (in.) 600 (23.62) TURRET Standard tool post Aut...
MEGABORE PB MODEL OIL COUNTRY LATHE
MEGABORE PB-50
* One piece bed, floor type casting. * 2 shear bed way with extra way supporting the apron. * All ways are hardened and ground. * Alloy steel spindle with opposed taper roller bearings. * Harde...
SHARP STA-50
This is a high precision CNC flat bed lathe with FANUC Oi-TD control. The STA series is available with option of 6", 9", 12" or 15" spindle bore, 37.38" swing over bed and 59" to 236" distance betw...