Wärtsilä Canada拍卖 - 实体拍卖(+网络直播)

编号
11176
标题
Large Capacity CNC Turning & Boring Facility
拍卖会类型
实体拍卖(+网络直播)
开始时间
2019年6月20日 10:30 EDT
结束时间
2019年6月20日 17:00 EDT
验货
Wednesday, June 19 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.
地址
8600 Saint-Patrick St.
Montreal, Quebec H8N 1V1
加拿大
Corporate Assets Inc.

更多关于此拍卖会

要查看此拍卖会更多信息,请点击此处

通过邮件收取拍卖会信息

您现在可以每天收到一封包含所有拍卖会推广项目的电子邮件。点击订阅设置进行操作。

编号
11176
标题
Large Capacity CNC Turning & Boring Facility
拍卖会类型
实体拍卖(+网络直播)
开始时间
2019年6月20日 10:30 EDT
结束时间
2019年6月20日 17:00 EDT
验货
Wednesday, June 19 from 9:00 A.M. to 5:00 P.M. and morning of auction to start of auction.
地址
8600 Saint-Patrick St.
Montreal, Quebec H8N 1V1
加拿大

拍品概述

FEATURING:

TOSHIBA (IMMACULATE CONDITION – PURCHASED NEW IN 2012) TSS 40/67C, travelling column CNC open side vertical boring & live milling center; TITAN (IMUAB) (COMPLETELY RE-MANUFACTURED BY DORRIES SCHARMANN IN 2001) SC 50/67, 196”/263” CNC twin ram vertical boring mill with milling, 300 Ton table capacity, SIEMENS 7-axis CNC control etc.; POREBA (2012 CNC RETROFIT) 54” x 192 heavy duty CNC lathe; TOS SU-100, 40” x 300” heavy duty engine lathe; POREBA TR-135-B1-3M, 40” x 120” heavy duty engine lathe; (2) TOS SN71C, 28” x 157” engine lathes; COMPLETE ROBOTIC THERMAL METAL SPRAYING SYSTEM consisting of a 6 axis ABB robot, bridge crane, POREBA 60” x 288” engine lathe, TAFA JP-5000 system etc.; TITAN 96” dual ram CNC vertical boring mill; O-M LTD 63” CNC vertical boring mill; STANKO 1516-300, 54” CNC vertical boring mill; STANKO 1L532, dual ram 110” vertical boring mill; TOSHIBA TX16, 63” vertical boring mill; RE-TOS (2004) W100, table type horizontal boring mill; TOS W100A, table type horizontal boring mill; 300 Ton horizontal hydraulic wheel press; (2) IRD balancing systems; STANDARD MODERN 20” x 60” CNC flatbed lathe; HWACHEON 18” x 80” engine lathe; (3) TOS SN50C, 16” x 78” engine lathes; HWACHEON 18” x 72” engine lathe; PYROTHERM (2016) natural gas fired oven; 20’ x 30’ Paint Booth; CANABLAST 10’ x 18’ shot blast booth w/ media reclamation; MP TECH 15’ x 15’ car bottom blast booth; CANABLAST shot blast w/ reclamation; GRIEVE batch oven; PEARSON 10’ x .375” shear; P&H 16,800 LB elevating tilt & rotate welding positioner; (3) IRCO & RANSOME tilt & rotate welding positioners; LANDIS 36” x 120” cylindrical grinder; MAS VR8, 8’ radial arm drill w/ rotary table; MAS VR4, 4’ radial arm drill; JONES vertical slotter; ABRATECH dust collector; ACCU late model chiller; (2) NEDERMAN portable fume extractors; CHURCHILL vertical spindle rotary surface grinder; ALSO featuring: welders, adjustable racking, box tables & MUCH MORE!

CNC VERTICAL BORING MILLS

TOSHIBA (IMMACULATE CONDITION – PURCHASED NEW IN 2012) TSS 40/67C, travelling column CNC open side vertical boring & live milling center w/ 157” table, right angle milling head, 24 ATC, FANUC 31i CNC control etc.
TITAN IMUAB (2001 SCHARMANN COMPLETE GROUND-UP REBUILD) SC 50/67, 7-axis CNC vertical boring mill with SIEMENS SINUMERIK 840C 7-axis CNC control and live milling, 263" max swing, 149" max turning height, 196" table diameter, 110" cross rail vertical travel, 78.74" RH head stroke, 187" RH head horizontal travel, 0-25 degrees RH head swivel, 49" LH head stroke, 187" LH head horizontal travel, LH head with 65 HP live milling spindle, ISO 50 spindle taper with speeds to 630 RPM, 330,000 LBS max table capacity, speeds to 32 RPM, 120 HP spindle drive, 360,000 positions table indexing, pendant mounted control, coolant, coolant filtration, chip guards, universal 2 axis gimbal milling head, right angle milling head, (2001 Complete ground-up rebuilD By Dorries Scharmann with All New Electrics, New Hydraulic System, New Coolant System, All New Servo Drives, New Lubrication System, New CNC Control, New Ball Screws, All Machine Parts Checked for Geometrical Accuracy & Overhauled) s/n n/a
OM CNC vertical boring mill with FAGOR 8055 (RETROFIT 2007) CNC control, 80" max swing, 63" table diameter, 43" head stroke, 27.55" head horizontal travel, chip guards, safety fence enclosure with interlocks, s/n n/a
STANKO 1516 300 CNC vertical boring mill with FAGOR 8055 (RETROFIT 2009) CNC control, 63" max swing, 39.37" max turning height, 55" table diameter, 33.50" head stroke, 27.55" head horizontal travel, ±45 degrees head swivel, 30,000 LBS max table capacity, speeds to 112 RPM, 80 HP spindle drive, chip guards, safety fence enclosure with interlocks, s/n 2517
TITAN SC27 CNC vertical boring mill with retrofit FAGOR 8055 CNC control, 2-heads, 104" max swing, 74" max turning height, 98" table diameter, 47.24" LH head stroke, 29.92" LH head stroke, 30,000 LBS max table capacity, speeds to 112 RPM, 80 HP spindle drive, chip guards, safety fence enclosure with interlocks, s/n n/a (NOT IN SERVICE)

VERTICAL BORING MILLS

STANKO (RECENT RETROFIT) 1L532 vertical boring mill with 2-heads, 125" max swing, 62.99" max turning height, 110" table diameter, 47.24" head stroke, 67.71" head horizontal travel, ±35 degrees head swivel in .01" increments, 5 station turret on RH head, RH side ram head, 32,200 LBS max table capacity, speeds to 63 RPM in (12) ranges, 46 HP spindle drive with retrofit YASKAWA GPD506/P5 VFD drive, (2) ACU-RITE (2) axis DRO's, push button pendant control, coolant, chip guards, safety fence enclosure with interlocks, s/n 762
SHIBAURA TX-16 vertical boring mill, 78.74" max swing, 59" max turning height, 63" table diameter, 39.37" head stroke, ±30 degrees head swivel, 28,000 LBS max table capacity, speeds to 160 RPM, 40 HP spindle drive, chip guards, safety fence enclosure with interlocks, s/n 320148

TABLE TYPE HORIZONTAL BORING MILLS

RE TOS (2004) W100A table type horizontal boring mill with 3.93" spindle, 49"x49" table, travels 68" longitudinal, 62" cross, 44" vertical, 35" spindle stroke, ISO 50 spindle taper, speeds to 1120 RPM, 15HP spindle drive, TOS SP100/800 spindle clamping support attachment, TOS SP100/500 spindle clamping support attachment, TOS FP40-100 milling head attachment, coolant, spindle & cutting guard with safety interlocks, ACU-RITE 4 axis DRO, s/n 240-05 3.487
RE TOS (2002) W100A table type horizontal boring mill with 3.93" spindle, 49"x49" table, travels 68" longitudinal, 62" cross, 44" vertical, 35" spindle stroke, ISO 50 spindle taper, speeds to 1120 RPM, 15HP spindle drive, TOS SP100/800 spindle clamping support attachment, TOS SP100/500 spindle clamping support attachment, TOS FP40-100 milling head attachment, coolant, spindle & cutting guard with safety interlocks, HEIDENHAIN 5 axis DRO, s/n 03-793.438
SELLERS table type horizontal boring mill with ACU-RITE DRO, tailstock, s/n n/a (NOT IN SERVICE)

CNC LATHES

POREBA gap bed CNC engine lathe FAGOR 8055 (RETROFIT 2011) CNC control, 56” swing over bed, 70" swing in the gap, 209” between centers, 5.50” spindle bore, 39” 4-jaw chuck, in/mm threading, steady rest, coolant, chuck & cutting guard with safety interlocks, s/n: 1139-536
STANDARD MODERN CNC engine lathe with FAGOR 8055 CNC control, 22” swing over bed, 60” between centers, 3” spindle bore, 12” 3-jaw chuck, in/mm threading, steady rest, coolant, chuck & cutting guard with safety interlocks, induction hardened bed ways, s/n: 11917

CONVENTIONAL ENGINE LATHES

TOS SU 100 engine lathe with 41” swing over bed, 325” between centers, 4” spindle bore, 40” 4-jaw chuck, speeds to 450 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n: 04 29420
POREBA TR-135 B1/3M gap bed engine lathe with 53” swing over bed, 62” swing in the gap, 137” between centers, 5.5” spindle bore, 40” 4-jaw chuck, speeds to 500 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n: 1191-133
TOS (2006) SN71C gap bed engine lathe with 28” swing over bed, 38” swing in the gap, 160” between centers, 2.90” spindle bore, 20” 4-jaw chuck, speeds to 1000 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n: 07007 71 40 06 0112
TOS (1999) SN71C gap bed engine lathe with 28” swing over bed, 38” swing in the gap, 120” between centers, 2.90” spindle bore, 20” 4-jaw chuck, speeds to 1000 RPM, in/mm threading, taper attachment, steady rest, coolant, HEIDENHAIN 2 axis DRO, chuck & cutting guard with safety interlock, s/n: 07007 71 30 99 0066
TOS (2005) SN50C gap bed engine lathe with 20” swing over bed , 27.50” swing in the gap, 78” between centers, 2” spindle bore, 12” 4 jaw chuck, speeds to 2000 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n 0800 50 20 05 0378
TOS (2001) SN50C gap bed engine lathe with 20” swing over bed , 27.50” swing in the gap, 78” between centers, 2” spindle bore, 12” 4 jaw chuck, speeds to 2000 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n 0800 50 20 01 0045
TOS (1999) SN50C gap bed engine lathe with 20” swing over bed , 27.50” swing in the gap, 78” between centers, 2” spindle bore, 12” 4 jaw chuck, speeds to 2000 RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, taper attachment, s/n 0800 50 20 99 0337
CAZENEUVE HB575 engine lathe with 22” swing over bed, 78” between centers, 2” spindle bore, 10” 3-jaw chuck, speeds to 1500RPM, in/mm threading, steady rest, coolant, ACU-RITE 2 axis DRO, chuck & cutting guard with safety interlock, s/n 8043

CONVENTIONAL MACHINE TOOLS

MAS VR8 radial arm drill with 8'6" arm, 20" column, speeds to 1750 RPM, 48"x48"x30" box table, OHIO 8' diameter powered rotary table, s/n 7278
MAS VR4 radial arm drill with 4'6" arm, 12" column, speeds to 2000 RPM, 28"x28"x18" box table, s/n 7278
CHURCHILL PBW universal cylindrical grinder with 13" swing, 60" centers, sliding table, 12" wheel, coolant, filtration, safety guards, s/n 29021
LANDIS 26X120 O.D. cylindrical grinder with 26" swing, 120" centers, 30" wheel, coolant, filtration, spare wheels and changeover parts, s/n n/a
STANKO 3G71 hydraulic surface grinder with 8"x23" electromagnetic chuck, 10" wheel, coolant, incremental down feed, s/n 10320
JONES MODEL 12 vertical shaper with 26" table, 12" stroke, coolant, guards, s/n n/a
HANSFORD DAVIS MODEL 5 floor type keyseater, s/n 5-1376
HYD-MECH (2005) S20 13"x18" capacity horizontal band saw, miter capability, coolant, s/n 61205216
DOALL DGP-24 heavy duty floor type gear head drill with 16"x20" table, speeds to 3360 RPM, s/n 26-8701
SELLERS 4G floor type tool and cutter grinder with 1 HP, s/n 02-1636
(2) DELTA 6" double end pedestal grinders, s/n n/a

DIGITAL DYNAMIC BALANCER

IRD MECHANALYSIS SERIES III shaft & rotor dynamic digital balancing system with IRD MODEL 290 SERIES III digital control and data acquisition computer, 10' max swing, 30' max centers, 30,000 LBS capacity, full safety cage enclosure with interlocks, s/n n/a

THERMAL SPRAY WELDING SYSTEMS

DEVILBISS 12'X24' paint booth with rotary table, METCO TYPE 6C thermal combustion wire spray metalizing system, automated overhead gantry type spray gun manipulator with digital 3-axis controls, lights and full safety enclosure, s/n n/a
TAFA-THERMAC robotic metalizing spray weld cell with combustion wire/combustion powder/plasma metalizing spray capability consisting of: TAFA 5120 thermal spray control console, ABB (2005) IRB2400 6-axis gun wielding robot with teach pendant controls, PONTS ROULANTS 2 TON capacity double girder underslung traveling gantry, POREBA 60"X288" lathe conversion turning manipulator, THERMACH (2014) AT-1000 plasma power supply, THERMAC (2014) AT-3000 plasma spray control system with digital touch screen PLC control, TAFA ARC wire spray system, THERMAC AT-1200 rotary wheel type powder feeder with digital controls, PRAXAIR MODEL 1264 rotary wheel type powder feeder with digital controls, sound proof operator booth with ventilation, full safety enclosure, s/n n/a

WELDING & FABRICATING

PEARSON 10' X 0.375" metal shear with front operated power back gauge, s/n 5861/9
P&H W12 16,800 LBS capacity tilt and rotate welding positioner, s/n WP2063
(2) IRCO 2-588 3,000 LBS capacity hydraulic tilt and rotate welding positioners, s/n n/a
RANSOME 25H 2,500 LBS capacity tilt and rotate welding positioner, s/n 165593
(2) MILLER DELTAWELD 450 MIG boom welders with wire feed, cables, gun and chillers, s/n n/a
MILLER XMT450 portable MIG welder with wire feed, cables and gun, s/n n/a

FACTORY EQUIPMENT

CANABLAST 10'X18' blast booth with MARCO (2011) M65-413 pressure pot with gun, ABRATECH cyclonic media recovery system with blower, lights and safety enclosure, s/n n/a
CANABLAST DCM-160 blast cabinet with rotary table and media recovery, s/n MD51L4-0056
PYROTHERM (2016) HTF-448CB-1800 natural gas fired heat treat and bake oven with 500,000 BTU/HR capacity, 1800 deg F max temp, max 5,000 LBS batch capacity, HONEYWELL digital microprocessor temperature controls, chart recorder, s/n 9980-8187-1
INGERSOLL RAND (2006) IPN100H-CC NIRVANA rotary screw type energy efficient air compressor with 100HP drive motor, max 145 PSI, s/n NV7379U06159
INGERSOLL RAND (2006) TMS 0540 refrigerated air dryer, s/n TMS 0540-0630/8162
DOMINICK HUNTER (2015) BA-DME015 DS breathing air purifier, s/n 15DME112088
ABRATECH pad type dust collector system with media recovery, s/n n/a

ALSO:
Selection of machining tool holders and fixtures and accessories; (4) heavy duty angle plates; selection of woodworking saws, band saws, floor type drill presses, double end pedestal grinders, cabinets, tables, shop benches; walk behind floor sweeper; gas powered snow blower; welding rod conditioning ovens; rotary tables; small welding positioners; selection of steel frames, jigs, fixtures, shafts and arbors, tempering ovens.

COMPLETE PLANT CLOSURE!

AUCTION CONDUCTED BY CORPORATE ASSETS INC. PROUDLY IN CONJUNCTION WITH: Prestige Auctions

About the Auctioneer

地址
373 Munster Avenue
Toronto, Ontario M8Z 3C8
加拿大

一些(10件)本拍卖会已发布的拍品?

品牌型号 类型 状况
thumb

TOSHIBA TSS 40/67C

立式镗铣床(包括VTL)
10 图片
状况
非常好
年份
2012
立式镗铣床(包括VTL)
非常好
2012
thumb

STANKO 1516

立式镗铣床(包括VTL)
7 图片
状况
良好
立式镗铣床(包括VTL)
良好
thumb

SHIBAURA TX-16

立式镗铣床(包括VTL)
2 图片
状况
非常好
立式镗铣床(包括VTL)
非常好
thumb

POREBA TR-135 B1/3M

马鞍车床
3 图片
状况
非常好
马鞍车床
非常好
thumb

RE TOS W100A

卧式镗铣床
7 图片
状况
良好
年份
2004
卧式镗铣床
良好
2004
thumb

RE TOS W100A

卧式镗铣床
10 图片
状况
良好
年份
2002
卧式镗铣床
良好
2002
thumb

STANKO 1L532

立式镗铣床(包括VTL)
6 图片
状况
非常好
立式镗铣床(包括VTL)
非常好
thumb

O-M

立式镗铣床(包括VTL)
10 图片
状况
良好
立式镗铣床(包括VTL)
良好
thumb

POREBA

CNC 车床
8 图片
状况
良好
CNC 车床
良好
thumb

TITAN IMUAB SC 50/67

立式镗铣床(包括VTL)
1 图片
立式镗铣床(包括VTL)