GEMINI GT5-42MCNC 车床(五轴或更多轴联动)



Gemini GT5-42M Brand New! Year of Mfg 2009 CNC 5-Axis Single Spindle Turning Center Serial Number: 2679


1.65 "
15 hp
4000 rpm
1.65 "
数控 (Mitsubishi M70)

Gemini GT5-42M Brand New!
Year of Mfg 2009
CNC 5-Axis Single Spindle Turning Center
Serial Number: 2679
The Gemini GT5 series are compact, high precision, high production CNC turning centers cast from Meehanite iron. Available up to 60mm bar capacities, this unique bar processing center provides complete machining including all complex milling functions. The GT series features 5-axes, 1turning spindle and 1 milling spindle, and a total capacity of 31 tools. A 3-axis (X, Y, Z) gang type vertical tool post serves the spindle.This CNC turning machine with a total of 14 tools (2 of them powered) is designed to work on complex workpieces. The control system makes a machining of two NC programs at the same time possible. For that reason simultaneous machining is possible from the outside as well as from the inside. Depending on the work piece, the working time can be reduced up to 50%.
Turning Spindles
The main spindle sports a 10HP high torque spindle motor. The main spindle can have 25mm, 42mm or 60mm bar capacity The main spindle features a full continuous C-axis with braking system and is standard with 42mm DIN-173-42B (Hardingestyle B42 collets) collet chucks. The spindle is cartridge type and employs P4 high precision bearings for stability and heavy cutting ability.Spindle nose is A2-5.
Tooling System
A unique 3-axis gang tooling system serves the spindle. The main tool post features X, Y and Z axis withfive (5) O.D. turning tools, four (4) I.D. turning tools, two (2) radial live tool heads. The sub tool post features X1 and Z1 axis with four (4) I.D. toolholders. The live heads are powered by a .7 HP spindle motor. Rigid tapping is standard. Main tool post has a Y axis for off center milling operations. Tool change time is near ZERO. Standard tooling system is 20mm square shank with the I.D. being either 20mm shank or ER-20 collet.
The machine frame and all major components are made from the highest quality cast iron. The machine weighs in at 6,820 lbs. The GT series uses large, 16mm Hiwin linear guide-ways in all linear axes. The 16mm rails increase stability and allow heavier cutting. The ball screws are double anchored, pre-tensioned and direct coupled to the Mitsubishi servo motors thus promoting precision.
CNC Control
The machine is equipped with the fully featured and powerful Mitsubishi M70 control. All spindles and axes use Mitsubishi AC servo motors and Mitsubishi amplifiers. The completely matched Mitsubishi CNC system provides extreme reliability and high performance. A 2-year warranty is standard on the CNC system.

• C & Y-Axis Standard
• Simultaneous Turning of ID and OD
• Linear Guides
• 4 Guide-ways on Z-Axis
• Parts Catcher
• Parts Conveyor
• Chip Conveyor


• CNC Control Mitsubishi M70
• Number of Axes 5
• Turning Diameter 1.65” (42mm)
• OD Turning length 10” (254mm)
• ID Turning length 6” (152mm)

• Work Station 1
• No of Headstock 1
• Spindle Orientation horizontal
• Spindle Power 10/15HP (7.5/11Kw)
• Spindle Bore 1.73" (44mm)
• Bar Capacity 1.65" (42mm)
• Spindle Nose A2-5
• Spindle Speed 4,000 rpm
• Collet Type KK5-153E/42B

• Tool Station 1
• Type Gang
• Tool Stations 10
• Square 0.79" (20mm)
• Round 0.79" (20mm)
• X-Axis Travel 7.87" (200mm)
• X-Axis Power 1.4HP (1kw)
• Y-Axis Travel 9.84" (250mm)
• Y-Axis Power 0.7HP (0.5kw)
• Z-Axis Travel 9.25" (235mm)
• Z-Axis Power 1.4HP (1kw)

• Tool Station 2
• Type Gang
• Tool Stations 4
• X1-Axis Travel 9.25" (235mm)
• X1-Axis Power 0.7HP (0.5kw)
• Z1-Axis Travel 9.25" (235mm)
• Z1-Axis Power 1.4HP (1kw)
• Length of machine 122" (3100mm)
• Width of Machine 68.5" (1750mm)
• Net Weight of Machine 6,820 lbs (3100Kg)