SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:

Used +GF+ 2006/2018R MIKRON UCP 600 Vario full 5-Axis Machining Center:

Machine made in Nidau, Switzerland

CONTROL
Heidenhain iTNC 530 with Ethernet and electronic handwheel for part setup

WORKING RANGE
Longitudinal X-Axis..................................... 23.6" (600 mm)
Cross Y-Axis............................................ 17.7" (450 mm)
Vertical Z-Axis......................................... 17.7" (450 mm)
B-Axis (Swivel)....................................... -115/+30 degrees
C-Axis (Rotary)........................................ n x 360 degrees

FEED DRIVE
Feed Rate X/Y/Z..................................... 590 IPM (15 m/min)
Rapid Speed X/Y/Z................................... 866 IPM (22 m/min)
Rapid Speed B-Axis (Swivel)..................................... 25 RPM
Rapid Speed C-Axis (Rotary)..................................... 33 RPM

WORKING TABLE
Pallet clamping surface.............. 11.02" x 11.02" (280 mm x 280 mm)
Maximum workpiece weight (manual loading)............. 441 lbs (200 kg)
Maximum workpiece weight (automatic with pallet changer) 198 lbs (90 kg)
Max pallet size possible for this machine 13.8" x 13.8" (350 x 350 mm)
Pallet type this machine is equipped for............. System 3R Dynafix
Number of pallet stations this machine is equipped with.............. 7
All feed motors are liquid-cooled
Direct measuring system Heidenhain rotary encoders

AUTOMATION
Automatic tool changer.................................... 30 positions
BLUM Laser tool measuring system.................... Standard, included
Infrared parts measuring touch probe..................... M&H, included
Automatic pallet changer number of pallet stations................... 7

WEIGHT
Including pallet changer........... Approximately 16,976 lbs (7,700 kg)
Machine base....................... Polymer concrete (man made granite)

STEPTEC SWISS MADE SPINDLE
Spindle taper.................................................. HSK A63
Spindle RPM................................................. 20,000 RPM
Spindle power 40% ED................................... 40.2 HP (30 kW)
Spindle torque 40% ED............................... 67.1 Ft/Lb (91 Nm)

EQUIPPED WITH:
Chip conveyor
Spray gun
Direct measuring system Heidenhain glass scales X/Y/Z, Encoders B,C
172 gallon (650 liter) coolant tank with micro paper band filter
External spindle chiller
261-1,015 PSI (18-70 bar) high pressure coolant thru the spindle
Seven (7) 3R-771.2 Dynafix pallets with milled surface 280mm x 280mm