HARDINGE CHNC-III
Used Hardinge CHNC-III CNC Lathe. 14" Swing, 1.625" Bar Cap, 10 hp, max 5000 RPM. Machine still runs, however, the spindle was running at 50% power last time they ran this machine. Parts machine, ...
HARDINGE COBRA 42
Item #: BV3559 HARDINGE #COBRA 42 TURNING CENTER EQUIPPED WITH: EQUIPPED WITH: -- FANUC 21IT -- 6" 3 JAW CHUCK -- NO TAILSTOCK -- MODEL: LC -- 230V -- WGT: PRICE: FOB BROOK PARK, OH - - - $7,450
HARDINGE COBRA 42
Item #: BV3767 HARDINGE #COBRA 42 TURNING CENTER EQUIPPED WITH: -- FANUC 21-T -- COLLET CHUCK - 16C -- NO TAILSTOCK -- CURRENTLY WIRED 230V -- SET OF COLLETS -- MANUALS -- WGT: PRICE: FOB BROOK PA...
HARDINGE COBRA 42
Hardinge Cobra 42 CNC Lathe, 1998 – Tooling
HARDINGE COBRA 65
Brand Hardinge Model Cobra 65 Controller Fanuc Serie 21i-T Voltage 240 Amperage Spindle 30 Spindle 8.25” chuck Through capacity 2.559” Turret stations 12 Tailstock no Oil skimmer yes Compressed air...
HARDINGE COBRA LC 65
HARDINGE CONQUEST 42
PRE-OWNED HARDINGE CNC LATHE, MODEL #: CS-42, S/N: CS-244, YEAR: 1988
HARDINGE CONQUEST 42
HARDINGE CONQUEST 42 CNC TURNING CENTER NEW IN 2002
HARDINGE CONQUEST 42SP
Siemens Control, Sub Spindle, Collet Chuck
HARDINGE CONQUEST CS42
Hardinge Conquest CS-42 CNC Lathe, Live Tooling, Sub-Spindle, Chip Conveyor, Parts Catcher
HARDINGE CONQUEST GT GANG TOOL
Hardinge Conquest GT Gang Tool CNC LATHE, Fanuc 0T, Live Tool, C-Axis
HARDINGE CONQUEST GT27
Hardinge Conquest GT27 General Precision CNC Gang Style Lathe with Fanuc 21T CNC Control. with parts catcher Barfeed may be available depending on agreed price. CALL NOW 230 volt - 60 cycle - 3 phase
HARDINGE CONQUEST GT27
Nice low hour Silicon Valley Machine
HARDINGE CONQUEST GT27SP
Hardinge Conquest GT27SP CNC Gang Tool Lathe equipped with Fanuc 18iT CNC Control including parts catcher and air blast. Machine also features C axis on the control. Machine voltage is 230 volt - 6...
HARDINGE CONQUEST GT27SP
HARDINGE, CONQUEST GT27SP, CNC, GANG TOOL, LATHE, GE FANUC ,18i, CNC CONTROL, 5C SPINDLE, 230/3/60, 35 KVA, S/N GTL-153-18 WITH LOADER
HARDINGE CONQUEST GTSP
Hardinge Conquest GT27SP Gang Tool CNC Lathe with Autodoor and chip removal system and air blast Fanuc 18T CNC Control
HARDINGE CONQUEST T42
* Fanuc 18-T Control * 5000 RPM * 10 HP Spindle * Coolant System with Chip Conveyor * 6 ID Tool Holders * ~50 Collets * 10 Straight & Right Angle Milling and Drilling Live Tools
HARDINGE CONQUEST T42
Hardinge Big Bore Turncenter w/ LiveTools, Barfeed , Parts-Catcher Very Well Maintained ! Call or Email Today for Video & Pricing
HARDINGE CONQUEST T42
Preowned HARDINGE Conquest T42 Precision CNC Lathe with 16C Spindle. 12 STATION T STYLE LIVE TOOLING TURRET & Subspindle. Parts catcher, C axis and Fanuc 18T CNC Control. 230 volt –60 cycle –3 pha...
HARDINGE CONQUEST T65
HARDINGE CS-GT
For sale: Hardinge Conquest GT CNC Lathe, used condition, 2-axis, 11.76" swing, 5 hp, 6,000 RPM. Includes GE Fanuc 18-T Control, chip conveyor, gang tooling cross-slide, and parts catcher. 5,500 cu...
HARDINGE CS-GT
Explore our Hardinge Conquest GT CNC Lathe! With an 11.76" swing, dual-axis control, 6" chuck, and 1.062" bar capacity. Reliable 5 hp motor, max 6,000 RPM. Features GE Fanuc 18i-T, gang tooling, an...
HARDINGE ELITE 51 MS
Fanuc 18i-TB Control Live Tooling Sub Spindle
HARDINGE ELITE 8/51
Hardinge Elite II-8/51 CNC Horizontal Lathe, Model ML, Live Tooling, Sub-Spindle, New 2005
HARDINGE GS 200/66 L
Long Bed 2 Axis CNC Turning Center, In plant, Running parts. Complete VDI Tool Holding Package included with machine. Great Starter Machine or Low Cost Machine for Short Runs.
HARDINGE GS 250
Clean 2018 HARDINGE GS 250 CNC Lathe coming from a nice shop with 1 owner/operator.
HARDINGE MG
Hardinge Quest GT27 CNC Gang Tool Lathe, 2012 – Less than 10 Spindle Hours, #22 B&S Collet Assembly
HARDINGE MG QUEST 27SP
Hardinge MG Quest 267SP, 2-Axis, 11" Sw/Ways, 2.7" Sw/Plate, Fanuc 21i-TB, 2008
HARDINGE QUEST 8/51SP
model: HARDINGE QUEST 8/51 SP CNC Lathe “SUPER PRECISION” 2005’ #GMT-3276 specifications: Reference # GMT-3276 Model # 8/51 SP “SUPER PRECISION” Serial # QC-653 Year of manufacture 8/2005’ Swi...
HARDINGE QUEST TWINTURN 65
Hardinge Quest TwinTurn 65 CNC Turning Center Lathe
HARDINGE RS51MSY
Elevate your production with a 2007 Hardinge RS51MSY CNC Turning Center. Features 19.1" length, 14.05" dia, 2" bar capacity, 20 hp, 6000 RPM, live tooling, sub spindle, and Fanuc control.
HARDINGE SUPER PRECISION T-42
HARDINGE Super Precision T-42 CNC Lathe (used) New 2011 w/LNS Quick Load Servo 80 magazine bar loader, High Pressure Coolant System, live tools, sub spindle, tooling.
