AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
BOEHRINGER DUS 400 TI
Model DUS 400 ti Year: 2003 S/N: 2012.1035-01 Condition Used Assembled Dimensions: 133 x 78 x 70 feet GENERAL Distance Between Centres 40 " Swing Over Ways 16.55 " Swing Over Carriage 9.05 " Bore D...
BRIDGEPORT EZ PATH
Bridgeport Romi EZ Path I CNC Lathe, 1996
BRIDGEPORT EZ PATH
Romi Bridgeport EZ- Path CNC Lathe, 1995 – Available Immediately
CHEVALIER FCL-1840F
2002 Chevalier FCL-1840F CNC Teach Lathe, Tailstock, Coolant System, 4-Station Toolpost, Automatic Lubrication
CLAUSING COLCHESTER STORM 80
2 Axis Slant Bed, 6" Chick, Fanuc 21T CNC
CLAUSING COLCHESTER STORM 80
CLAUSING / COLCHESTER STORM 80 CNC TURNING CENTER - FANUC EQUIPPED WITH: -- SERIAL: T70086/86 -- AGE: 1997 -- 6" CHUCK - 3 JAW -- TAILSTOCK -- FANUC 21T -- 4,000 RPM -- 230 VOLTS -- MAX TURNING 6...
COLCHESTER MULTI TURN 3000
Colchester Multi Turn 3000 CNC Lathe, 2007 – Low Hours, Tailstock, Fanuc Control & Tooling Included!
DAEWOO LYNX 200
Daewoo Lynx 200 CNC Lathe, 1998 – Mitsubishi Control, Tailstock
DAEWOO LYNX 200A
Excellent condition and well Tooled
DAEWOO PUMA 10HC
Daewoo Puma 10HC Heavy Duty CNC Lathe in 10-10 Condition, 10" 3- Jaw Chuck Installed, Programable Tailstock, Chip Conveyor, All Tooling Books & Manuals
DAEWOO PUMA 8HC-3A
This 1995 DAEWOO PUMA 8HC-3A comes from a small garage shop with only two CNC machines and is climate controlled to 70 degrees year round. It cut only aluminum aerospace parts for Boeing and Airbus...
DAEWOO PUMA 8S
Daewoo Puma 8S CNC Lathe, Fanuc 0-T Control, 8" Kitagawa 3-Chuck, Tool Presetter, Tailstock, s/n PM8S-0277, 1995 Specifications: Capacity: Max Turning Diameter: 14.6″ Max Turning Length: 20.7″ ...
DMG MORI CTX BETA 1250 TC
2018 DMG Mori CTX Beta 1250 TC LOW HOURS
DMG MORI CTX BETA 1250 TC
DMG MORI CTX BETA 1250TC CNC 5-AXIS LATHE, 2013
DOOSAN PUMA TW2600M GL
Less than 2,000 cutting hours per spindle! Available for immediate purchase is this lightly used twin spindle 2019 Doosan Puma TW2600M-GL multi-axis CNC lathe a with gantry loader system. This rob...
DOOSAN DAEWOO LYNX 200A
DAEWOO DOOSAN LYNX 200B CNC TURNING CENTER, Fanuc 21i-T CNC Control, 6.5" 3-Jaw Chuck, 18.11" Swing, 11.02" Between Centers, 11.81" Max Turning Length, 10 HP, 5000 RPM, 12-Position Turret, Tool Set...
DOOSAN DAEWOO LYNX 220C
Doosan Daewoo Lynx 220C CNC Turning Center, 2005 Fanuc i Control 5C Collet Nose 12 Position Turret Parts Catcher
EMCO HYPERTURN 45
Emco Hyperturn 45 Installed 2015 CNC Lathe SN: 25-291369 2 Turrets 2 Spindles Y-Axis Driven Tools on both turrets 7,000 rpm Spindle, 430mm Swing Over Bed, 12-Position Tool Changer...
EUROTECH B465T3Y3
Eurotech B465 T3-Y3 CNC Turning Center, New in 2020
FEMCO DURGA 12E
Femco Durga-12E 9.84" x 23.62" CNC Turning Center
FEMCO HL-25
Femco HL-25 9.84" x 23.62" CNC Turning Center
FEMCO HL-25
Femco HL-25 CNC Lathe, 2008 – Fanuc Control, Tailstock, Chip Conveyor
FUJI ANS-31P
Fuji ANS-31P, Fanuc 18i-LNB CNC, 16/5" Swing, 8" Chuck, Tool Probe, Part Probe, 8-Position Turret, New 2008, 2 Available.
FUJI HM-30T1
FUJI HM-30T1 SINGLE SPINDLE CNC LATHE W/GANTRY & MILLING
GILDEMEISTER CTX-320 LINEAR
Excellent Condition
GILDEMEISTER CTX-320 LINEAR
Gildemeister CTX-320 Linear CNC LATHE, Fanuc 180i
GILDEMEISTER CTX-400 S2
1998 Gildemeister CTX-400 S2 CNC Lathe, 10" SMW-Autoblok 3-Jaw Hydraulic Chuck, Chip Conveyor, Hydraulic Tailstock, 12-Station VDI30 Turret
GILDEMEISTER CTX-410 LOW HOURS
19.8" Swing 23.62" Centers Gildemeister CTX-410 LOW HOURS CNC LATHE, Fanuc 21iT, 10" chk., Tailstck, Chip Conv.
HAAS SL-10
HAAS SL-10 CNC TURNING CENTER, Haas CNC Control, Royal Collet Chuck, 16.25" Swing, 14" Max Turning Length, 1.5" Bar Capacity, 2.31" Spindle Bore, 15 HP, 6000 RPM, 12-Position Turret, Tool Setter, S...
HAAS SL-10
2008 Haas SL-10 CNC Lathe, Tailstock, Tool Pre-Setter, Chip Auger
HAAS SL-10T
HAAS SL-10T 2-AXIS CNC LATHEHAAS SL-10T 2-AXIS CNC LATHE