MEGABORE PB-60
- 规格参数改为公制回转直径60"顶尖间距118"主轴孔径21"功率40 hp
- 产品概述
The PA and PB series of Heavy Duty Lathes were developed and designed to provide optimum performance with high cutting power while providing versatility for use in a wide range of industries : general purpose machine shops, mining industry, power industry, oil industry, paper plants, and shipyards, etc.
The PB series feature the most modern designs, providing high efficiency and easy operation.Single piece bed casting resting entirely on the floor for maximum rigidity
Top slide is hardened and precision ground
Headstock clutch and brake. (OPTION)
Massive heavy duty headstock
Natural and removable gaps
6-Ways power feed/rapid feed
Hollow spindles 6″ – 9″ 10″ 12.5″ 16″ 18″ 20″ 22″ 28″
Semi automatic threading and copy system for the oil industry.GENERAL
* One piece bed, floor type casting.
* 2 shear bed way with extra way supporting the apron.
* All ways are hardened and ground.
* Alloy steel spindle with opposed taper roller bearings.
* Hardened and ground gears, shafts.
* Electromagnetic spindle brake.
* 18-speed geared headstock.
* 6-way rapid traverse and power feed to top slide.
* Totally enclosed universal inch / metric gear box.
* Carriage position device.
* Dual voltage spindle motor, 20 to 50 HP.
* Pressurized one shot lube system for cross slide and carriage.STANDARD ACCESSORIES
* 1 dead centre, MT #6.
* 2-speed tailstock quill (manual).
* One piece stainless steel leadscrew cover.
* Coolant pump.
* Follow type splash guard.
* Rear side chip and water collect plate.
* Thread chasing dial.
* Water and oil collect plate under apron.
* Work lamp.
SPECIFICATIONS
BED
Width (W/O auxiliary guide)
mm (in.)
715 (28.14)
Width (W auxiliary guide)
mm (in.)
800 (31.49)
CARRIAGE
Cross slide travel
mm (in.)
800 (31.49)
Compound tool post travel
mm (in.)
500 (19.68)
4-way tool post width
mm (in.)
255 (10.03)
THREAD FEED RANGE
Longitudinal feed
mm/rev (in.rev)
0.045~2.55 (0.0018~0.1)
Cross feed
mm/rev (in.rev)
0.023~1.28 (0.0009~0.05)
Longitudinal rapid feed
mm/rev (in.rev)
2000 (78.74)
Cross rapid feed
mm/min (in/min)
1270 (50.00)
Metric thread
mm (kinds)
1~56 (60)
Inch thread
TPI (kinds)
1/2~28 (60)
Module thread
MOD (kinds)
0.25~14 (60)
Diamteral pitch thread
DP (kinds)
2~112 (60)
Pitch of leadscrew
mm (TPI)
12 (2)
TAILSTOCK
Quill diameter
mm (in.)
145 (5.70)
Quill travel
mm (in.)
200 (7.87)
Inner taper of quill
MT#6
Bearing surface on the bed ways
mm (in.)
600 (23.62)
MOTOR
Main spindle motor
KW (HP)
22(30)-STD.
29(40) / 37(50)-OPT.
Coolant pump motor
KW (HP)
0.1 (0.125)
Note :
(1) X and Z axes actual cutting diameter will change when equipped with different turrets.
(2) Specifications are subject to change without notice for improvement - 关于公司
Megabore Machinery Inc (USA), ESP Machinery (Australia), and ESP Megabore (UAE) are new and used machinery suppliers. We have been in the engineering and machinery business since the 60,s. We stock and supply a large range of mainly heavy duty machinery all over the world. Our large range heavy duty Megabore Lathes and Megabore Proma Grinders are made by our partners in Taiwan. Machines can also be made to clients requirements. Clients can visit the factory to inspect their machines by prior arrangement. The Megabore Series of Heavy Duty Lathes were developed and designed to provide optimum performance with high cutting power while providing versatility for use in a wide range of industries. General purpose machine shops, mining industry, power industry, oil industry, paper plants, and shipyards, etc. We we are now the largest suppliers of large hollow spindle lathes in the world. A combination of swing and center distances can be offered to suit clients needs at reasonable prices. Our CNC machines are fitted with the latest controls, Siemens, Fanuc or Fagor being the most popular choices. Heavy duty Lathes both CNC and conventional are available with swings up to 80 inches and center distances up to 40 ft. We also offer heavy duty roll grinders, vertical turning lathes/vertical boring mills. Our businesses in the UAE and Australia offer new machines and a large range of used machinery. Please contact us, we would be happy to assist.