GLEASON 450HC 傘齒輪刨齒機

產品參數

配備

規格表

Specifications:

Largest Speed Ratio:  10:01
Work Area (Continuous):
Largest Depth of Teeth:  15.24 mm
Largest Width of Tooth Face:  50.8 mm
Work Area Axis:
Horizontal Movement X Axis:  -114 - 178 mm
Vertical Movement Y Axis:  -178 - 190 mm
Movement of the Carriage Baseplate Z-Axis:  -10.16 - 500 mm
Workpiece Headstock Swivelling Range B-Axis:  -3 - 90 Degree
Maximum Distance Machine Center to Spindle Side:  165 mm
Number of Teeth:  5-200 Inclusive
Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using
Max. Cutter Dia. 12" Cutter at the Following Ratios:

Face Milling
1 x 1 - 13.5" - 342.9mm                        
2 x 1 - 16.0" - 406.4mm                        
5 x 1 - 17.7" - 450.0mm                        

Face Hobbing (210mm Dia. Cutter)
1 x 1 - 10.560" - 268.22mm
2 x 1 - 10.286" - 275.00mm
5 x 1 - 11.810" - 300.00mm
Milling Head Diameter:
Helixact: 100,125,169,200,250,320mm
Continuous Gumption Procedure, Teichloroethylene:  102 - 210 mm
Workpiece Spindle:
Drilling of Large Diameters:  5 3/64"
Cone Upward Gradient on 304.8 mm (1 Foot):  21/32"
Deep One of the Cone:  5.29"
Diameter of the Whole Spindle Perforating:  3.35"
Speeds:
B-Axle Workpiece Headstock Drag Axis:  30 Degrees
A-Axle Workpiece Spindle Number of Revolutions:  0 83 min-1
X-Axis Horizontal:  80 mm/sec
Y-Axis Vertically:  80 mm/sec
Z-Axis Carriage Baseplate:  80 mm/sec
Space Requirement L x W x H (Approx):  4.75 x 3.40 x 2.54m 
                                       188" x 134" x 100"
Machine Weight (approx):  10980 kg 
                          24,156 lbs