觀察

萬能外圓磨床KONDO 450-U-H-TS

New Jersey, 美國

總覽

製造商
編號
310626
年份
1986
地址
New Jersey
美國
庫存號
152490
種類
12" Swing 18" Centers Kondo 450-U-H-TS OD GRINDER, I.D. ATT., HYD. TABLE, AUTO INFEED, PLUNGE, RAPID,
參數
參數改為公制
回轉直徑11.8"
頂尖間距18"
砂輪轉速2,000 RPM
砂輪直徑16"

規格表

11.8" X 18" KONDO "JAPANESE" PRECISION UNIVERSAL I.D./O.D. CYLINDRICAL GRINDER  MODEL: #450-U-H-TS       S/N: 52364      MFG. 1986 MAXIMUM SWING OVER TABLE............... 11.8" DISTANCE BETWEEN CENTERS............... 18" TABLE:MAX. TABLE STROKE ..................... 23"STROKE PER ONE TURN OF HANDWHEEL ...... 0.8"TRAVERSE SPEED........................ 0.4" TO 80" I.P.M. SWIVEL TABLE GRADUATED INCLUDED ANGLE)................ 4 DEG. CW/8 DEG. CCW  WHEELHEAD:GRINDING WHEEL ............. 16" DIA. x 1" TO 3"W x 8" BORESWIVEL RANGE .......................... CCW 5 DEG./CW 30 DEGREESGRINDING WHEEL SPINDLE SPEEDS.......... 1500/2000 R.P.M.INFEED HANDWHEEL, 1 GRAD. = ........... 0.0001"FINE FEED FOR WHEELHEAD, 1 GRAD. = .... 0.00005"ONE REV. OF HANDWHEEL REPRESENTS ..... 0.1" AUTOMATIC INFEED @ TABLE REVERSAL,ON DIA. .............................. 0.0005" TO .002"PLUNGE GRINDING, FEED RATE RANGE ...... 0.0005" TO .070"MIN./MAX. PLUNGE CUT DEPTH ............ 0.004" TO .16"MOVEMENT OF UPPER SLIDE ADJUSTMENT .... 6.3"RAPID HYDRAULIC INFEED STROKE.......... 1"TRAVERSE ON FEED SCREW ................ 4.9" WORKHEAD: WORKHEAD SPINDLE SPEEDS (4) ........... 65 TO 355 RPM WORKHEAD TAPER......................... #4 MT DIA. OF HOLE, WORKHEAD SPINDLE......... 0.8" WORKHEAD SWIVEL RANGE.................. + 90 DEG./- 30 DEGREES TAILSTOCK:TAILSTOCK TAPER........................ #4 MTTAILSTOCK STROKE ...................... 1.2" REQUIRED FLOOR SPACE .................. 110" X 71" X 70"HAPPROX. WEIGHT ........................ 6,600 LBS. EQUIPPED WITH:SWING DOWN INTERNAL GRINDING ATTACHMENT w/SPINDLE"HEIDENHAIN" DIGITAL READOUT DISPLAY, ON MACHINE CONSOLEWHEEL BALANCING STANDCOOLANT SYSTEM WITH MAGNETIC SEPERATORMANUALS FOR THE MACHINE MACHINE FEATURES: HYDRODYNAMIC WHEELHEAD SPINDLE BEARINGSWHEELHEAD INFEED IS BY BALL SCREW WITH BACKLASH ELIMINATOR HYDRAULIC OPERATION FEATURING:-SINGLE LEVER AUTO CYCLE CONTROL-AUTO TABLE TRAVERSE-AUTO INFEED-DUAL RATE (COARSE & FINE) PLUNGE INFEED-RAPID WHEELHEAD AVANCE & RETRACTIONSPARKOUT TIMER (0 TO 60 SECONDS)BACKLASH ELIMINATORDUAL LIVE/DEAD HEADSTOCK SPINDLE 16" GRINDING WHEEL PRESENTLY ON MACHINELUBRICATION SYSTEM5.5 H.P. MOTOR FOR GRINDING WHEELHEADMOTORS ON MACHINE ARE DUAL VOLTAGE (220/440 VOLTS) SPECIAL NOTE:JAPANESE BUILT MACHINE, SUPERIOR QUALITY! **  FOR MORE INFORMATION: Call Andy at 973-497-7600
賣方信息

更多此型號產品資訊

要查看關於KONDO 450-U-H-TS的更多資訊,如品牌資訊、圖片、視頻等, 請點擊此處

查看此類型更多的產品

CINCINNATI

萬能外圓磨床

1968 | Michigan, 美國
thumb

LANDIS 3RH

萬能外圓磨床

1980 | Michigan, 美國

CINCINNATI

萬能外圓磨床

1950 | Michigan, 美國

CINCINNATI

萬能外圓磨床

1970 | Michigan, 美國
查看全部