SIP MP5E座標鏜床

編號
384878
製造商
型號
使用狀況
非常好
編號
1202
地址
Utah
美國
庫存號
9819

種類

Just received! Fine tool in rare condition. From long term stand by storage. Runs excellent. Flaking on ways is HIGHLY visible! Super smooth & quiet, dripping with Tooling

參數

參數改為公制
工作臺寬(W)
31.25 "
工作臺長(L)
35 "
尺寸
96” L x 72” W x 94”H
重量
11,400 Lbs.

We are pleased to offer, subject to prior sale and our conditions of sale, the following for your consideration:
Very Low Hour
Pre-Owned High-Precision Sip Jig Bore Vertical Milling, Drilling & Boring Machine
Gantry Type Boring Mill Made in Switzerland
Model: MP-5E Serial No: 1202

General specifications are approximate and are subject to verification.

Diameter of Spindle: 3 47/64”
Spindle Speeds: 12 changes 55 to 2250 RPM
Drilling Feeds, Metric: 4 changes 0.04 – 0.21 mm
Drilling Feeds, Inch: 4 changes .0015 .003 .005 .008
Spindle Stroke: 7 3/32”
Spindle Taper: #4MT
Size of Table: 31 ¼” x 35”
Vertical Travel of Column: 29”
Longitudinal Table Travel Movement: 28”
Free Pass Between Machine Columns: 34 29/64”
Maximum Pass Between Table & Spindle: 37 ½”
Minimum Pass Between Table & Spindle: 7 7/8”
Main Motor: 5 HP
Electricals: 220/440 V 3 phase
(currently@440 Volts)
Max Table Load: 1,325 Lbs.
Approx. Weight: 11,400 Lbs.
Approx. Dimensions: 96” L x 72” W x 94”H

Complete with:
• Built in Feeds in all directions, Power Rapid Traverse in all directions, Factory standard set up
• Extensive Sip tooling package w/ boring heads, keyless drill chucks & boring bars, all in excellent condition.
o 2 each Sip Original Boring Head units, 3 ½” Wide Body, with 7/8” straight shank
o 4 each Albrecht Keyless Drill Chucks, w/integral MT # 4 Shank, original units
o 9 each Sip Original Boring Bar holders, individual boring bars with indexable inserts ranging from 5/8” to 2 3/8” diameter of the boring head.
• Built-in side dial indicator system for spindle head and table movement with clear bezels

Inventory No: 9819

賣方信息

查看公司資料