BULLARD CUTMASTER 42立式鏜銑床(包括 VTL)

編號
422975
製造商
使用狀況
良好
年份
1952
編號
26502
地址
Texas
美國
退貨規定
30天
庫存號
B600672

種類

42" Used Bullard (Cut Master) Vertical Turret Lathe Ref.#B600672 Model: 42" Cut Master Serial No. New: Table Size...42" 4-Jaw Swing Side Head Above Table...45" Swing Side Head Below Table...54" Cross Rail Travel...25" Height Under Rail...37" Table Speed...4.1 To 200 Rpm's Feeds....026 To 500 IPR Main Motor...30 Hp. Turret Head Travel Left To Right...30-3/8" Turret Head Swivel...30 Degrees Turret Ram Head Turret Travel Up & Down...37" Max. Distance Table To Turret Face...48-1/4" Turret Head Position...5 Side Head Travel In & Out...21" Side Head Travel Up & Down...37" Machine Weight...39,000 Machine Floor Space...118"X118" Machine Height...120" Power Elevation Of Rail...Yes Rapid Traverse To Both Head...Yes Built In 4 Way Tool Post On Side Head...Yes Side Head...Yes Turret Head...Yes Note: Note: Machine Has Been Cleaned, Painted And Cycled. All Feed And Rapid Shafts Seals Have Been Replaced. Hand Wheel Seals Have Been Replaced, Gear Boxes Have Been Cleaned And Checked. Hydraulics And Main Motor Have Been Reconditioned. Condition: Good

參數

參數改為公制
工作臺直徑
42 "
回轉直徑
54 "
最大加工高度
37 "
功率
30 hp
主軸轉速
200 rpm
尺寸
118" X 118" X 11'2"
重量
39,000 Lbs

42" Used Bullard (Cut Master) Vertical Turret Lathe Ref.#B600672
Model: 42" Cut Master
Serial No. New:

Table Size...42" 4-Jaw
Swing Side Head Above Table...45"
Swing Side Head Below Table...54"
Cross Rail Travel...25"
Height Under Rail...37"
Table Speed...4.1 To 200 Rpm's
Feeds....026 To 500 IPR
Main Motor...30 Hp.
Turret Head Travel Left To Right...30-3/8"
Turret Head Swivel...30 Degrees
Turret Ram Head Turret Travel Up & Down...37"
Max. Distance Table To Turret Face...48-1/4"
Turret Head Position...5
Side Head Travel In & Out...21"
Side Head Travel Up & Down...37"
Machine Weight...39,000
Machine Floor Space...118"X118"
Machine Height...120"
Power Elevation Of Rail...Yes
Rapid Traverse To Both Head...Yes
Built In 4 Way Tool Post On Side Head...Yes
Side Head...Yes
Turret Head...Yes

Note: Machine Has Been Cleaned, Painted And Cycled. All Feed And Rapid Shafts Seals Have Been Replaced.
Hand Wheel Seals Have Been Replaced, Gear Boxes Have Been Cleaned And Checked. Hydraulics And
Main Motor Have Been Reconditioned.

Condition: Good

賣方信息

查看公司資料