普通車床ACER DYNAMIC 1740G
美國總覽
Acer Dynamic 1740G Lathe
Headstock's rigidity and durability are derived from high tensile cast iron (FC25).
A uniquely designed gear box offers a comprehensive range of inch and metric threads without changing gears.
Simple laid-out electric cabinet is easy to maintain and easy to fix.
Saddle is coated with Turcite-B to provide wear resistance.
Three point support on the spindle is the key to heavy cutting.
Triangular ribbed bed with annealing process on the casting allows no deformation to occur on the slideways.
A 2-1/4" diametered quill, graduated in inch and metric scales, is made from low carbon steel (SCM4), and it is hardened and ground to its accuracy.
Electro-trochoid pump forces lubrication oil to all running parts inside the headstock.
Oil bathed cross lead screw (optional).
Oil flood indicator.
Hand chip guard.
Output shaft of the gear box is designed with a safety pin to protect from damage.
Power disconnecting limit switch.
Drip-proof 7.5 HP spindle motor.
Mechanical drum type brake is easy to adjust and maintain.
Hardened & ground bedways at Rockwell C 55å¡.
Hardened & ground cross slideways.
Saddle lock device for heavy cutting.
Triangular bed web for rigidity.
Oil bathed longitudinal lead screw.
Forward/stop/reverse lever with safety device.
Oil level indicator.
Multi-position length stop.
Machine bed with FC-30 casting iron.
Machine weighs in at 3,500 / 3,950 / 4,400 lbs.
The manufacturer reserves the right to modify the design, specifications, mechanisms, etc. to improve the performances of the machines without notice. All specifications shown above are for reference only.
參數改為公制
回轉直徑 | 17" |
頂尖間距 | 40" |
主軸孔徑 | 2.25" |
功率 | 7.5 hp |
主軸轉速 | 1,800 RPM |
橫拖板上最大回轉直徑 | 9.625" |
規格表
Weight: 3800
Height: 67
Length: 88
Width: 41