MONARCH 14C
14″ x 54″ Monarch 14C Engine Lathe – 10″ Chuck, 3-Jaw, Available Immediately
COLCHESTER 8052
17"x100"cc COLCHESTER Engine Lathe
SOUTH BEND 17 TURN-NADO
PREOWNED SOUTH BEND ENGINE LATHE, MODEL #: TURN-NADO 17 in x 54 in , S/N: 69GJ1801, YEAR: 1969
LEBLOND MAKINO REGAL SERVO-SHIFT
Can be seen under power in our PA warehouse!
VICTOR 20120
20" Swing 120" Centers Victor 20120 ENGINE LATHE, Inch/Metric, Gap, 3-Jaw, Aloris Toolpost, Steady
CLAUSING COLCHESTER 21
Description 21” x 120” Used Clausing Geared Head Lathe Specifications: Swing Over Bed Ways 21″ Swing Over Cross-Slide 14” Distance Between Center 120” Spindle Hole 3-1/2″ Spindle Motor 12.5 HP Spin...
LEBLOND 19" REGAL SERVO SHIFT
19" X 102" Used LeBlond Servo Shift Engine Lathe
TARNOW TUJ 50M/3000
22" Swing 120" Centers Tarnow TUJ-50M 3000 ENGINE LATHE, Inch/Metric,Gap,Taper,3&4 Jaw,3.5"Hole,Steady,15HP
TARNOW TUJ 50M/3000
22" x 120" Tarnow Model TUJ-50M Engine Lathe, Hardened & Ground Bed Ways, In/Met Threading, 18" 4-Jaw Chuck, 12-1/2" 3-Jaw Chuck, Steady Rest, Taper Attachment, 31-1/2" Swing in Removable Gap, D1-1...
CLAUSING 21" X 108" ENGINE LATHE
23" Swing, 108" Centers, 3.5: Bore
AMERICAN MODEL STYLE D
AMERICAN (#0088) ENGINE LATHE, MODEL STYLE D, 18” SPINDLE SIZE, 120” MAX C-C DISTANCE, 17” OVER CARRIAGE, 24” MAX OVER WAYS, TAPER ATTACHMENT, 2 STEADY RESTS, 20 H.P., SPINDLE SPEED 15-100 RPM, S/N...
MAZAK HEAVY DUTY 24
24" x 100" Mazak Heavy Duty Manual Engine Lathe
STANKO 1M63
Stan Canada Industrial Machine Tools and Service All new and used machines are internally and externally checked by our machinist to make sure that we properly deliver the quality of the equipment...
TOOLMEX TUR 630A
The lathe is in fully functional working condition
DAEWOO-IKEGAI DA25
This lathe runs really well and can be seen under power.
TOOLMEX TUR 630
This lathe is super clean and comes equipped with a chip conveyor and Siemens 810D. It has very low hours, has been well-maintained. To the best of our knowledge, all details listed below are dee...
CUTMASTER BIG-JOE
LEBLOND REGAL
LeBlond Regal 26" x 132" Gap Bed Engine Lathe
LODGE & SHIPLEY RXE2516
LODGE&SHIPLEY (U.S.A) 洛奇 & 希普利 RXE-2516型 美國精密中型車床 (中古品) 床面上旋徑26.5"(673)、鞍上旋徑20"(508)、中心距離120"(3048)、皮帶輪轉速845、主軸孔徑65、床台寬度540、四爪夾頭徑550、主馬達22KW、(30HP)×4P、機械尺寸5470L×1700W×1460H
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
TIMEMASTER SUPER M
27"x120"cc TIMEMASTER Engine Lathe
STANKO 1M635
27.5"X 120" Stanko Heavy Duty Engine Lathe Model 1M635
STANKO 1M63B
Contact Us (780) 465-3667 sales@stancanada.com www.stancanada.com
STANKO 1M63B
Contact Us Phone: 1(780) 434-0099 Email: Sales@stancanada.com
STANKO 1M63B
SPECIFICATIONS: 424 Serial: 4691 Mfg: 1991 Spindle Speed: 10 - 1250 rpm (6 Ranges) Spindle Bore: 3-3/8" Chuck: 4 Jaw Chuck - 20" Ø Swing: 28" Length: 120" Leadscrew: 2 tpi Steady Rest: 17" Ø Taper ...
WHACHEON HL720
2-Axis Sony DRO Rapid Traverse Thread Dial Extra Large Steady Rest 15" Buck Adjustable 3-Jaw chuck
ACER DYNAMIC 29120G
29" Swing 120" Centers Acer DYNAMIC 29120G ENGINE LATHE, Inch/Metri, 4" Hole, Taper, 2-Steady Rests,3&4 Jaw
KINGSTON HD-3000
KINGSTON 30 x 120" Removable Gap Bed Engine Lathe. Fully Installed in Shop Under Power for Inspection! Power Feeds, 2-Chucks Included 15" 4-Jaw, 12" 3-Jaw Top Condition!
KINGSTON HI-29120
Kingston 8.5" Hollow Spindle Engine Lathe, taper, threading
SOUTH BEND 750
30" x 108" SOUTH BEND ENGINE LATHE, Model 750, 30" Swing Over Bed, 28" Swing Over Cross Slide, 108" Centers, 21" 4-Jaw Chuck, 4" Thru Hole, Inch/Metric Threading, Steady Rest, New 1997. (2) Machine...
YAMAZAKI MAZAK-30
LEBLOND MAKINO HD3220
32" X 120" Used LeBlond Heavy Duty Engine Lathe
STANKO 16K40-3
SPECIFICATIONS: 410 Chuck: 25" 4 Jaw Chuck (No Jaw) Swing: 34" Length: 140" Speed: 10 - 1250 rpm Serial #: 1171 Power: 220V, 3p, 65A Taper Attachment Lamp & Lubrication 40 Position Quick Change Too...
KINGSTON HR3000
34" x 120" Kingston HR 3000, 46" in Gap, 29" 4-jaw, 25" 3-jaw, 4" Bore, Taper attachment.... 2008
POREBA TPK-90/3M 36" X 132" LATHE
24" 4 Jaw Chuck, Sony Digital Readout
POREBA TPK-90A/3M
36" x 120", Gap Bed, Digital Readout, Steady Rest
POREBA TPK-90A1/4M
12.5" Bore, Front and Rear Chuck, Inch Metric Threading
POREBA TR2-93/14 HOLLOW SPINDLE LATHE
(NEW), 14.1" Spindle, 36" Swing, 120" Centers, Inch Metric Threading