UNION BFP 130 CNC
Type: BFP 130 CNC Producer: Union Year: 1993 Year of overhaul: 2008 workspindle diameter: 130 mm X-11500mm Y-2500 mm Z-420 mm W-800mm Spindle taper: ISO 50 Heidenhain iTNC 530 Option: rotary table ...
TOSHIBA BF-130B TANDEM
Toshiba Tandem Floor Boring Machine.(2 x column, 3 x rotary tables) Model : BF-130B Y.O.M : 2005 Tandem Type TOSNUC – 888 Spindle diameter : 130 mm X-axis : #1, #2 each : 14000 mm The maximum appro...
GIDDINGS & LEWIS 800-RFX
Giddings & Lewis 8" 800-RFX CNC Ram/Floor Type Horizontal Boring Mill, See attached Spec. Sheet and Photos
PAMA SPEEDRAM 3000
Excellent Top Quality Machine Condition -5,000 x 5,000 mm Rotary Table - 100 Ton Capacity -120 Position Automatic Tool Changer -Automatic Head Changer -Universal Milling Head -Right Angle Head -Co...
FPT M-ARX20 / AREA-M20000
20,000mm FPT Dual Horizontal CNC Boring Mills M-ARX20 & Area-M, Rotary Table, Tilt/Milling Head Attachments, Coolant System, Chip Conveyor, Bedway Levelers
SCHIESS FRORIEP 1 FB 180
Hydrostatic guideways Hydrostatic spindle bearing Pick place head change station 1 = Facing head with U-Axis 2 = Universal milling head 3 = Boring Spindel support 4 = Vertical millin...
SCHARMANN HEAVY CUT 2 WFT 150
5.9" Scharmann Heavy Cut 2 Ram Type, X-780", Y-138", Z-23.4", W-27.6", Angle Head, 60 HP, Heidenhain TNC 407, #27919
INNOCENTI 200
Huge capacity Ram type Horizontal Boring & Milling Machine. Overhauled & Retrofitted and in great condition. Inspect under power or have our engineer inspect and report back to you. Exceptional cap...
PAMA SPEEDRAM
7.99" Pama SpeedRam, X-630", Y-236", Ram-52", Spindle-32", 75 HP, 196" x 196" RTab, Fanuc 31iM CNC, #25313
TOSHIBA SHIBAURA BSF 32/21
Toshiba SHIBAURA Mod. BSF 32/21 Floor type Boring Mill Year: 1977 Boring spindle: 210mm Milling spindle: 320mm High speed spindle: 100mm Ram size: 600x700mm Ram travel: 1500mm Boring spindle travel...
UNION PCR160PLUS
6.3" Union PCR 160 Plus, Ram Type ATC, AAC, X-590", Y-236", Z-59", 3500 RPM, TSC, 80 HP, 2012 #30930
MECOF CS-88/G/S
1996 Mecof CS-88/G/S CNC Milling Boring Machine, Mobile Column, Dual-Range Automatic Universal Milling Head, 2000 RPM Spindle, CAT-50, Coolant System
WOTAN RAPID 3
MV18181 CNC Boring Mill Spindle diameter: 6" Taper: #50 Travel in Y: 98.42" Travel in X: 544" Travel in Z: 39.37" Travel in W: 27.55" Spindle speeds: 900 RPM Control: FANUC 15 M *Retrofit 2013* Yea...
GIDDINGS & LEWIS 70-H6-UF
Excellent Condition (2 MACHINES ON SHARED X-AXIS BED) Rebuilt & Retrofitted In 1990, Used In an Aerospace Components Plant, Very Well Maintained and Calibrated, (2) Two GE-1050 CNC Control, Infeedi...
SKODA HCW 3 250
Featuring * Siemens Sinumerik 840D SL CNC Controls * 60 Position Automatic Tool Changer * CNC Heavy Duty Rotary Table With B-Axis 177.2” x 177.2” x 120 Ton Load Cap. * Universal Milling Head * Angu...
TOSHIBA BF-130A
TRAVEL:X:13500mm, Y:2000mm, z1:1000mm, Z2:450mm Without plate, without rotary table
PAMA SPEEDRAM 1000
PAMA Automatic Head changer system PAMA MG4 High Speed Head 8000 Rpm & 20 kW PAMA CU130-90S Tool changer up to 1300 Kg tool weight Chip conveyor 235 mm and 1200 mm output height Double Floorp...
PAMA SPEEDRAM 1000/150
Boring spindle diameter 150 mm Dimension of Spindle ram 360 x 4000 mm Spindle Speed 6.0 ~ 3,500 rpm Spindle motor power /SI) 37 KW ...
WMW BP-180P CNC
WMW BP-180P CNC, 7.08" Spdl, X-511", Y-196", Z-47", W-39", 2500 RPM, 157" x 157" R.Tab, Fanuc 18i-MB CNC, #30944
MITSUBISHI MAF 280/210NC
Mitsubishi MAF 280/210, 8.27" Spdl, X-492", Y-236", Z-90", 2800 RPM, Facing Head , 100 HP, Siemens 840D, #32218
TOSHIBA SHIBAURA BSF-150A
Floor Type Horizontal Boring Mill 79" x 157" T-Slotted Floor Plates 79" x 98" 2-Axis Rotary Table 60 Position ATC
SKODA W160
Type: Horizontal borer W 160 Producer: Škoda workspindle diameter: 160 mm Travel X-axis: 11000mm Travel Y-axis: 3000 mm Travel Z-axis-: 1250 mm Travel W-axis, spindle stroke: 1600 mm Clamping tape...
GIDDINGS & LEWIS H-60FCX
Unit is in good condition. It has been taken out of service because it was no longer needed.
GIDDINGS & LEWIS H-60FCX
408” X 72” X 48” Horizontal Boring Mill with G & L 8000 CNC Control
HNK HFB-150
Featuring * Fanuc 18i NB Control System. * 60 Position Automatic Toolchanger * 2 x Floor Plates 3000 mm X 4000 mm * Attachment Changer for 3 Milling Heads & Cover * Thru-Spindle Coolant. * 1 ...
WOTAN RAPID 5C
6" Wotan Rapid 5C Ram Type, X-393", Y-149", Z-55", 13"x13" Ram, 110 HP, Heidenhain 530 CNC '04 #25807
WOTAN RAPID 6
Aerostic in X Direction Hydrostatic Z Direction ( RAM) Hydrostic W Direction ( Spindel) Retrofitted in 1999 Optional DV45 Rotary table Optional Floorplates (3 units) 6750 x 5250 mm Optional A...
FRORIEP FBT 130/200
Floortype Horiz. Boring Mill "FRORIEP“ FBT 130/200 Vallourec Ref#: M13.03 Year of implementation: 1960 Year of Modernization: Additional Information: Technical specifications Machine: Frori...
SKODA W-160H
Horizontal borer W 160 H CNC Year of made: 1988 Year of overhaul, modernization: 2009 workspindle diameter: 160 mm Travel X-axis: 9000mm Travel Y-axis: 3000 mm Travel W-axis: 1600 mm Clamping tape...
TOSHIBA BF-130B
Spindle Diameter 130 mm Quill Diameter 360 mm Spindle Taper ISO 50 Milling Spindle Nose Dia. 225 mm Spindle Speed 4 ~ 1,...
TOSHIBA BF-130B
Spindle Diameter 130 mm Quill Diameter 360 mm Spindle Taper ...
TOSHIBA BF130-B
5.12" Toshiba BF-130B, X-354", Y-118", Z-39", W-17", 1600 RPM, BT-50, Fanuc 31iB CNC, 2016, #31919
INNOCENTI FAF147.5
5.7" Innocenti FAF147 Ram Type, X-326", Y-137", Z-60", W-30", 1.3 - 640 RPM, BT-50, Seimens Osia 10/110M, 73 HP, #31990
SNK BFR-3500
* CNC Rotary Table – 2,500 x 2,500 mm * 60 Position Automatic Tool Changer * Base Plate (2 Pieces) 2,398 x 3,196 mm (x2) * Includes 1 x 90 Degree Angle Milling Head – 300 mm * Scale Feedback System...
SKODA W200HB
Horizontal borer type W 200 HB CNC Year of made: 1983 workspindle diameter: 200 mm Travel X-axis: 8000mm Travel Y-axis: 4150 mm Travel Z-axis: 2000 mm Travel W-axis: 1600 mm (Z+W) max: 2000 mm Cl...
SKODA W200HB
Horizontal borer type W 200 HB NC Year of made: 1984 workspindle diameter: 200 mm Travel X-axis: 8000mm Travel Y-axis: 4150 mm Travel Z-axis: 2000 mm Travel W-axis: 1600 mm (Z+W) max: 2000 mm Cla...
SNK BFR-3500
SNK BFR-3500 RAm Type, 60 ATC, X-315", Y-137", Z-64.3", 6000 RPM, Rotary Tbl, 100 HP, Fanuc 31i-B, 2014 #31968
UNION PCR160
6.3" Union PCR160 Ram Type, X-275", Y-196", Z-90.5", 118" x 118" B-Axis Table, 2800 RPM, 80 HP, Siemens 840D, '09 #31393
TOSHIBA BF-130A
5.12" Toshiba BF130A, X-295", Y-118", 78" x 98" Rotary Table, 5-800 RPM Fanuc 15-M CNC, 1996, #32261
TOSHIBA BF-130A
5.12" Toshiba BF-130A, X-295", Y-118", 180" x 156" T-Slotted Floor Plate, Fanuc 15-M CNC, 1997, #32262