BLUM-NOVOTEST 4-SQUARE
With the test rig the following parameters are measured and controlled: speed, torque, jouance, steering angle. Four shafts are simultaneously tested in a closed loop, with multi-block programs. Al...
BLUM-NOVOTEST COOLER
The impulse test stands are used to perform life-cycle tests for coolers. In addition to various pressure functions, the specimens are subjected to different temperature ranges. In this context, cu...
BLUM-NOVOTEST DOUBLE-CLUTCH
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST E-DRIVE TRANSMISSION
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FRONT-LENGHTHWISE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FRONT-TRANSVERSE
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST FUNCTION TEST RIG
The test rig is designed for measurement of functional values of drive shafts.
BLUM-NOVOTEST GAUGE/BURST
The test stand, shown on the first picture below, is designed for burst testing of hydraulic hoses or pipe sections at a max. pressure of 3000 bar. The key components of the test stand are a test ...
BLUM-NOVOTEST HEAVY-TRUCK
The transmission test stands developed by Blum-Novotest are used for quality assurance purposes during production. The test stand illustrated here is used to test the function of the transmission a...
BLUM-NOVOTEST HOT/COLD BOOT TEST RIG
This climatic chamber is used to perform endurance tess of boots.
BLUM-NOVOTEST HYDRAULIC VALVES
The testing system consists of two autonomous conveyor belts, each with one loading section, 20 pallets, 3 test stations with drainage device as well as an unloading section with trays. All test st...
BLUM-NOVOTEST IMPULSE
The test stands are optimised for industrial testing norms, some of which use large hosediameters up to 2” as well as fluid temperature control up to 160 °C. The test stands are equipped with a wal...
BLUM-NOVOTEST IMPULSE AUTOMOTIVE
The test stands for the automotive industry allow the connection of up to 24 specimens. A special feature of the tests is the ability to perform reliable tests at temperatures ranging from -40 °C t...
BLUM-NOVOTEST LOW PRESSURE
Low-pressure test stands for gasoline hoses are computer-controlled test system for performing static and dynamic tests on hoses and hose systems with test fluids from high hazard categories such a...
BLUM-NOVOTEST MT IMPULSE
The MT series impulse test stands represent a cost-effective alternative because they are a modular solution. The standard machine contains the basic functions required for a standard impulse test,...
BLUM-NOVOTEST NVH TEST RIG
The NVH test rig is used to measure the forces and structure born noise generated or transmitted by automotive drive shafts.
BLUM-NOVOTEST QUASI-STATIC
The test rig is used to determine the break resistance of constant velocity drive shafts. Two opposite parallel shaft transmissions are connected by the test specimen and a slave shaft. In this loa...
BLUM-NOVOTEST QUASI-STATIC BREAKING
The test rig is used to determine the break resistance of constant velocity drive shafts. Two opposite parallel shaft transmissions are connected by the test specimen and a slave shaft. In this loa...
BLUM-NOVOTEST RETARDER BRAKES
Retarders are fitted as auxiliary brakes in commercial vehicles. Blum-Novotest constructs test stands for performing the final inspections of retarders. They are used to carry out the inspections r...
BLUM-NOVOTEST SWING RIG
The swing test rig simulates the movements of a transmission in the vehicle with regard to the installation location during uphill and downhill driving and at a roll angle of up to max. ± 65°. The ...
BLUM-NOVOTEST TEMPERATURE TESTS
Universal R&D test bench for pressure and function testing of automatic gearboxes and its components
TEYOU JLT
It's suitable for the pressure performance test of the flange type, welding type, internal and external thread type valves. fully meet the GB/T 13927-2008, JB/T 9092-99, the API 598 requirements.
TEYOU JWT
It's mostly suitable for the welding valve and as well as uses to flange and thread valve extra-high pressureunder the condition ofmatching with the plane seal plate, high and middle pressure perfo...
TEYOU JWTQ
It's suitable for the pressure performance test of the small bore flange type, welding type, internal and external thread type forge steel valves, fully meet the GB/T 13927-2008, JB/T 9092-99, the ...
TEYOU JWZ
It's mostly suitable for the seal pressure of the flange straight connection valve and performance test of the valve body strength pressure; The packing method adopts the flange terminal seal, ...
