60" diameter rotary table powered by a 1/4 HP DC gear motor, single phase, 60 hertz, 115 volts, with a solid state variable speed control to provide a speed range of 0 to 4.5 RPM
Variable speed gun oscillator powered by a 1 HP DC gear motor, single phase, 60 hertz 230 volts, with a solid state variable speed control to provide approximately 3 cycles per second and adjustable stroke of 0 to 6". The oscillator will hold 8 guns.
(8) Type "B" Ruemelin high efficiency suction blast guns with steel air jets and ceramic nozzles sized to suit your compressed air volume (Cabinet hopper has provisions for 10 guns.)
(1) 24" adjustable air knife at the exit opening
Airline filter for air knife
Pressure regulator with gauge for air knife
Master air manifold with pressure gauge, individual control valves for each blast gun, solenoid valve for main manifold and air solenoid valve for the air knife. (Manifold has provisions for 10 guns.)
Airline filter
Pressure Gauge
Entrance and exit vestibule openings to be approximately 12" x 18" and protected by two 4-ply rubber apron strips
Fluorescent light fixture
Viewing window on each of the two rear access doors protected by a replaceable steel sight screen and a rubber-lined steel slide-up shield
Quick opening door latches on rear doors
Interlock switches on rear access doors to help prevent accidental blasting when doors are open
Heavy-duty 5/16" thick perforated table plates below the main turntable to help prevent parts from falling into the abrasive hopper and to facilitate fixturing of extra guns off the oscillator
Heavy-duty rimmed perforated cast iron table segments that are individually replaceable
1/2" thick rubber table mat perforated to match the perforations on the above table segments
Main shell of blast cabinet, hopper, and doors to be fabricated of 7-gauge steel
Interior of blast cabinet to be lined with 1/8" thick jade rubber.

Table Loading Piece Size: 12" x 18"
Weight: 40 Lbs per Piece
or 800 Lbs. Total