1 - 50 of 65 Models
thumb

GLEASON 1000GMS

The 1000GMS Gear Inspection Machine offers complete inspection of gears as large as 1 meter in diameter which now can be performed up to 25% faster (gear design dependent) than previous measuring s...

Gear Testers
1 photo
thumb

GLEASON 1000T

Now roll testing and single flank testing of bevel, angular bevel and parallel-axis gears with diameters up to 2,500 mm can be completed much faster and easier than ever before, with introduction o...

Gear Testers
1 photo
thumb

GLEASON 100PS

Designed specifically for the economical production of gears with interfering contours and features. The 100PS, a new machine for power skiving of small to medium-sized workpieces in module range ...

Gear Hobbers
1 photo
thumb

GLEASON 100S

The 100S Gear Shaping Machine, features a class-leading stroke rate of up to 3,000 double - strokes per minute and is ideally suited to small face widths gears, including spur and helical gears, bo...

Gear Shapers
1 photo
thumb

GLEASON 1500GMS

The 1500GMS Gear Inspection Machines offer all the advantages of Gleason Metrology Systems technology in gear measurement, including five-axis design, generative motion, state-of-the-art 3D scannin...

Gear Testers
1 photo
thumb

GLEASON 150SPH

Gleason Gear Honing Machines are successfully producing gears in various industries since the mid 1990’s. Based on the roven machine design and patented Spheric® Honing Technology, the latest devel...

Gear Honers
1 photo
thumb

GLEASON 175GMM

The 175GMM Gear Inspection Machines offer all the advantages of Gleason Metrology Systems technology in gear measurement, including four-axis design, generative motion, State of the Art 3D scanning...

Gear Testers
1 photo
thumb

GLEASON 175GMS

The new-generation Gleason 175GMS Analytical Gear Inspection System is the single solution for a wide range of inspection tasks: fine pitch gears as small as .2 module (optional), surface finish me...

Gear Testers
1 photo
thumb

GLEASON 2000GMS

The 2000GMS Gear Inspection Machine offers all the advantages of Gleason Metrology Systems technology in gear measurement, including five-axis design, generative motion, state-of-the- art 3D scanni...

Gear Testers
1 photo
thumb

GLEASON 200SVP

The 200SVP Gear Plunge Shaving Machine for medium and high-volume production focuses on emerging markets. It is backed with decades of Gleason’s knowledge and experience in shaving all while mainta...

Gear Shavers
1 photo
thumb

GLEASON 3000GMS

The 3000GMS Gear Inspection Machines offer all the advantages of Gleason Metrology Systems technology in gear measurement, including five-axis design, generative motion, state-of-the-art 3D scannin...

Gear Testers
1 photo
thumb

GLEASON 300GMS

The new 300GMS®meets every inspection challenge that might exist for Gear producers, particularly those in automotive, aerospace, and those that produce fine pitch gears; as small as .2 module. Sha...

Gear Testers
1 photo
thumb

GLEASON 300GMSL

The Gleason 300GMSL Multi-Sensor Inspection System provides manufacturers a single, compact, reliable and easy to operate inspection solution to apply the most desirable gear measurement and analys...

Gear Testers
1 photo
thumb

GLEASON 300GMSP

The new-generation Gleason 300GMS®P Analytical Gear Inspection System brings a full range of inspection capabilities to the production floor, where it can operate more efficiently in close proximit...

Gear Testers
1 photo
thumb

GLEASON 300PS

The 300PS, 400PS and 600PS represent new machines for power skiving of workpieces with diameters up to 600mm, swing diameters up to 750mm and module range up to 6.0 mm. These larger machines are bu...

Gear Hobbers
1 photo
thumb

GLEASON 300TWG

The Gleason 300TWG combines the best of both worlds: productivity and flexibility in one compact threaded wheel grinding machine. 4 different dressing options ensure flexibility or productivity dep...

Gear Grinders
1 photo
thumb

GLEASON 350GMS

The 350GMS Gear Inspection Machines offer complete inspection of gears as large as 350 mm in diameter which now can be performed up to 40% faster (gear design dependent) than previous measuring sys...

Gear Testers
1 photo
thumb

GLEASON 360T

Faster, more flexible CNC-controlled roll testing of spiral and hypoid gear sets - with either standard 90 degree shaft angles or with shaft angles from 65 to 185 degrees - is now possible with the...

Gear Testers
1 photo
thumb

GLEASON 400PS

The 300PS, 400PS and 600PS represent new machines for power skiving of workpieces with diameters up to 600mm, swing diameters up to 750mm and module range up to 6.0 mm. These larger machines are bu...

Gear Hobbers
1 photo
thumb

GLEASON 410SCG

The 410SCG regrinds shave cutters up to a diameter of 400 mm and module 14 mm fulfilling the high end quality requirements necessary for tool resharpening.

Gear Shavers
1 photo
thumb

GLEASON 475GMS

The 475GMS Gear Inspection Machine offers all the latest advantages of Gleason Metrolgy Systems technology in gear measurement, including four-axis design, generative motion, state-of-the-art 3D sc...

Gear Testers
1 photo
thumb

GLEASON 500CB

The 500CB delivers faster, more accurate, and highly automated build, truing and inspection of stick-blade type bevel gear cutters. Use a single machine to set up, true and inspect a wide range of ...

Gear Cutter, Settings/Inspecting
1 photo
thumb

GLEASON 600HTL

Gleason is proud to offer the 600HTL TURBO LAPPER® Bevel Gear Lapping Machine, bringing a new dimension of features and process capability to the lapping process. This fast and flexible machine off...

Gear Lappers
1 photo
thumb

GLEASON 600HTT

Since 2001 the Gleason 600HTT TURBO TESTER® Hypoid Testing Machine has set the world standard for CNC-controlled roll testing with advanced quality measurements. Although the new 2007 360T (right-a...

Gear Testers
1 photo
thumb

GLEASON 600PS

The 300PS, 400PS and 600PS represent new machines for power skiving of workpieces with diameters up to 600mm, swing diameters up to 750mm and module range up to 6.0 mm. These larger machines are bu...

Gear Hobbers
1 photo
thumb

GLEASON 650GMS

The 650GMS Gear Inspection Machine offers complete inspection of gears as large as 650 mm in diameter which now can be performed up to 40% faster (gear design dependent) than previous measuring sys...

Gear Testers
1 photo
thumb

GLEASON 685Q

Gleason’s new 685Q Process Controlled Quenching Machine (PCM) replaces the 537 PCM for improved production quenching of automotive, truck and tractor main drive gears,aerospace gears and other flat...

Gear Quenching Presses
1 photo
thumb

GLEASON 887 CURVIC

The Gleason 887CNC CURVIC® Coupling Grinder is a high speed, large bore workspindle machine for grinding CURVIC teeth in face couplings. A fully-automatic grinding cycle allows the 887CNC to produc...

Gear Grinders
1 photo
thumb

GLEASON 888 CURVIC

The Gleason 888CNC CURVIC® Coupling Grinder is a high speed, large bore workspindle machine for grinding CURVIC teeth in face couplings. A fully-automatic grinding cycle allows the 888CNC to produc...

Gear Grinders
1 photo
thumb

GLEASON AGILUS 180TH

The Agilus 180TH features a universal and highly productive multi-functional concept capable of machining shaft and disk-shaped workpieces in a single setup (one-piece flow). This machine provides...

Gear Hobbers
1 photo
thumb

GLEASON BPG

The Gleason Blade Profile Grinder is designed to significantly reduce floor-to-floor times -- and the cost of blade resharpening -- by combining a unique Gleason Quickedge™ grinding process (patent...

Grinders, Profile
1 photo
thumb

GLEASON CCB CONIFLEX

The CCB CONIFLEX® Curvic Build & Inspection stand is a compact and economical inspection tool for building and inspecting Coniflex Plus cutter heads and CURVIC couplings. The unit is not only suita...

Gear Cutter, Settings/Inspecting
1 photo
thumb

GLEASON DOP 160

For use in the inspection lab or in the manufacturing cell, Gleason Metrology Systems manual pitch diameter measurement systems provide reliable dimension over pins or balls measurements to verify ...

Gear Testers
1 photo
thumb

GLEASON DOP 320

For use in the inspection lab or in the manufacturing cell, Gleason Metrology Systems manual pitch diameter measurement systems provide reliable dimension over pins or balls measurements to verify ...

Gear Testers
1 photo
thumb

GLEASON GBX

An advanced blade inspection system providing measurements and calculations for RSR®, TRI-AC® and PENTAC® (known as SUPERI-AC™ in Japan) style blades.

Gear Cutter, Settings/Inspecting
1 photo
thumb

GLEASON GENESIS 130H

The Genesis® 130H Hobbing Machine is a vertical hobber capable of producing gears and shafts with an outside diameter as large as 130mm. The Genesis Hobber was designed as a totally new product in...

Gear Hobbers
1 photo
thumb

GLEASON GENESIS 130SV(IC)

The Genesis® 130SV(iC) Gear Shaving Machine is a compact, highly productive machine for the fine finishing of soft spur and helical gears with an optionally integrated chamfering and deburring stat...

Gear Shavers
1 photo
thumb

GLEASON GENESIS 160TWG

The Genesis® 160TWG Threaded Wheel Grinder is a compact, highly productive machine for grinding hardened spur and helical gears. The Genesis 160TWG incorporates the most modern features and capabil...

Gear Grinders
1 photo
thumb

GLEASON GENESIS 200GX

Gleason’s Threaded Wheel Grinding Machines Genesis® 200GX and 260GX combine maximum productivity with minimized idle and setup times. With their double-spindle concept they are ideal machines for c...

Grinders, Thread
1 photo
thumb

GLEASON GENESIS 210H

The 210H Hobber is designed for and is particularly well-suited for dry hobbing. The work area is completely isolated from the machine frame to minimize thermal expansion caused by contact with ho...

Gear Hobbers
1 photo
thumb

GLEASON GENESIS 210HIC

Designed to optimize dry machining, reduce floor space requirements and greatly improve cycle times for cylindrical gears and shafts with an outside diameter as large as 210 mm. Complete manufactu...

Gear Hobbers
1 photo
thumb

GLEASON GENESIS 260GX

Gleason’s Threaded Wheel Grinding Machines Genesis® 200GX and 260GX combine maximum productivity with minimized idle and setup times. With their double-spindle concept they are ideal machines for c...

Grinders, Thread
1 photo
thumb

GLEASON GENESIS 400H

The Genesis® 400H vertical gear hobbing machine is the perfect solution for medium size disc or shaft type work pieces with up to 400 mm outside diameter and module 8. An optional chamfering/deburr...

Gear Hobbers
1 photo
thumb

GLEASON GP200

Gear Hobbing Machine designed for dry and wet machining of parts up to 200 mm OD and module 5 mm. Manual or automatic loading options provide versatility to cover different customer requirements.

Gear Hobbers
1 photo
thumb

GLEASON GP300

The GP300 Gear Hobbing Machine is designed for dry and wet machining parts up to 300 mm OD and module 6 mm. Manual or automatic loading options provide versatility to cover different customer requi...

Gear Hobbers
1 photo
thumb

GLEASON GP300ES

Gleason GP300ES Gear Shaping Machine with electronic helical guide. Based on the worldwide proven Gleason-Pfauter Gear Shaping Machines, a totally new shaping head was developed featuring a backlas...

Gear Shapers
1 photo
thumb

GLEASON GRS-2

Gleason Metrology Systems durable and reliable double flank gear roller systems are well suited for use on the shop floor or in the inspection lab. Choose from the simplest manual (hand) double fla...

Gear Testers
1 photo
thumb

GLEASON NCG-125

The NCG-125 is the most advanced automatic multi-purpose (face mill) cutter sharpening machine on the market today. 5 axis CNC control provides for fully automatic blade positioning and machine cyc...

Gear Cutter Sharpeners
1 photo
thumb

GLEASON NCG-205

The NCG-205 is the most advanced automatic multi-purpose (face mill) cutter sharpening machine on the market today. 5 axis CNC control provides for fully automatic blade positioning and machine cyc...

Gear Cutter Sharpeners
1 photo
thumb

GLEASON P90CD

Adding an NC-controlled chamfering and deburring station which works in parallel with hobbing turns the P90 into the advanced P90CD. The P90CD can handle any profile which can be hobbed, up to a d...

Gear Hobbers
1 photo