PEGASO 7000 9000 (ITALMAC, ITALY) - CNC MACHINING CENTER FOR MACHINING ALUMINUM STEEL PROFILES CNC machining center with 4-axis control (4 for the working tool), designed for drilling, milling, end milling and thread cutting at any angle from 0 � to 180 � (including intermediate). The center allows you to process workpieces, both in 2 independent working areas ("pendulum mode"), and in one integrated working area Clamp positioning: The center comes standard with 8 automatically moved pneumatic clamps. PEGASO-7000: the clamps are positioned in two independent axes (this configuration allows you to position the clamps in one working area of the center, without stopping processing in the second working area). Profile positioning: Loading / unloading of profiles in each working area of the center is carried out at a blocked time. Each workpiece loaded into one of the working areas can have a different length, cross-section and types of processing. Axis movement: � X-axis (longitudinal axis): 7000 mm � Y-axis (transverse axis): 700 mm � Z-axis (vertical axis): 300 mm with end mill 40 mm protrusion � A-axis (vertical movement horizontal): from +/- 95 � (including all intermediate angles) Axis positioning speed: � X: 80 m / min. ; � Y: 64 m / min .; � Z: 30 m / min .; � A: 10.800 degrees / min .; Dimensions of workpieces to be processed � Maximum dimensions of a workpiece that can be machined on one surface in a standard pneumatic clamp (width x height x length): 700x280x7000 mm; � The maximum dimensions of a workpiece that can be machined on three surfaces in a standard pneumatic clamp (width x height x length): 530x280x7000 mm. Spindle characteristics: � Power: 8.0 kW (optionally can be increased) � Torque: 12.7 Nm � Adjustable speed: from 0 to 24,000 rpm. � Cone for fastening the tool: HSK-40 E � Cooling the engine with liquid from an external installation Automatic tool changer; tool magazine capacity: � 7 tools; � 1 special tool (max. Tool size: � = 120 mm degrees / min