Tours CNCMILLTRONICS ML40/160
Ohio, Etats-UnisAperçu
Marque
Modèle
Carte identité
604443
Type
Condition
Used - Good
Année
2010
Numéro de série
11251
Emplacement
Ohio
Etats-Unis
Etats-Unis
Politique de retour
tel quel
Numéro de stock
34718
Autre Caractéristiques de Metric
Taille mandrin | 31.5" |
Capacité de la barre | 2" |
# Axe | 2 |
Alimentation électrique | 35 hp |
RPM Max | 500 RPM |
Diamètre admissible | 40" |
Usinage Longueur | 160" |
Contre-poupée | Yes |
Outillage direct | No |
Sous la broche | No |
Poids | 29000 |
Commande numérique CNC | CNC (MILLTRONICS 8200-B) |
Fiche technique
Specifications:
Swing over bed - 39.7"
Swing over gap - 50"
Swing over cross slide - 26.6"
Gap distance - 14.6"
Center distance - 160"
X-Axis travel - 21"
Z-Axis travel - 160"
Spindle bore - 14"
Spindle nose - A2-20
Spindle speed range low - 10 to 375 rpm
Spindle speed range high - 10 to 500 rpm
2-Speed AC Spindle motor (1 min / 30 min) - 35/25 HP
Tailstock quill travel - 9"
Tailstock quill diameter - 4.92"
Tailstock quill taper - MT6
Automatic turret - 12 Tools
Tooling size - 1"
Tool selection - bi-directional
X,Z axis rapid traverse rate - 500 ipm
Max cutting feed rate - 100 ipm
Machine height - 90"
Floor space - 272" L x 110" D
Machine weight, approx - 29,000 lbs.
Includes the following:
Milltronics 7200 Conversational CNC Control
12" LCD Active Matrix Color Display
14” Spindle Bore ($90,000 option back in 2010)
12 Station Front Mount Pragati Turret
35/25 HP Spindle Motor. Range 1: 10-375 RPM, Range 2: 10-500 RPM
Software Package A (Thread Chasing, Constant Surface, Rigid Tap)
High Torque AC Digital Servo Drives
Edit Lockout Key
End of Cycle Light
Worklights
Remote Handwheel
Rear Mounted Chuck Flange with A2-20 mount (same as front)
50-300mm Steady Rest
250-500mm Steady Rest
31.5” 3-Jaw Chuck (no jaws)
Live Center
Automatic Metered Lubrication
Heavy Duty Metal Enclosure with Sliding Front Door
Chip Drawer Containment System