SPINDLE Spindle Power: 3 hp (2.24 kW) Spindle Speed: Low: 180 to 2,500 RPM, High: 250 to 3,500 RPM Spindle Taper: 5C (with removable insert) Spindle Bore Diameter: 1.53 in. (38.86 mm) (with 5C insert removed) Spindle Nose: D1-4 Camlock Mount MOTION Max Feed Rate: 60 IPM (1.52 m/min) (X) 60 IPM (1.52 m/min) (Z) Axis Drivers (X,Z): High-Performance Polyphase Stepper Motors with Leadshine® Microstepping Drivers POWER Power Required (Primary): 230 Vac single-phase, 20A breaker Power Required (Secondary): 115 Vac single-phase, 20A breaker MACHINE SPECIFICATIONS Recommended Footprint: 72 in. × 42 in. (1829 mm × 1067 mm) Typical System Weight: 1800 lbs. Swing Over Bed: 15 in. (381 mm) Diameter Swing Over Carriage: 6.2 in. (157.5 mm) Diameter X-Axis Travel: 10 in. (254 mm) Z-Axis Travel: 12 in. (305 mm) Recommended Chuck Size: 6 in. (152 mm 8 Station Turret Path Pilot Controller