Recherché (1,292)
1 - 50 de 1292 annonces

I'm looking for a TRUMPF #TC-5000/1300 #Turret Punches, but am open to other manufacturers and models.

about 1 heure il ya |
Date postale
about 1 heure il ya

I'm looking for a TRUMPF #TC-5000/1300 #Turret Punches, but am open to other manufacturers and models.

about 1 heure il ya |
Date postale
about 1 heure il ya

Kitamura HX250 (no HX250G) Fanuc Control super clean need up to 2 machines. No tombstones needed

X:12"
Y:12"
Z:13"
Alimentation électrique:10 hp
tr/min:15,000 RPM
# ATC:40
Palette-P:10"
Palette-L:10"
Cône:BT 30
# Axe:4
Colorado
environ5 heures il ya |
Date postale
environ5 heures il ya
Colorado

I'm looking for a FANUC #D21LIA5 #鑽孔攻絲加工中心, but am open to other manufacturers and models.

X:27"
Y:15"
Z:13"
Alimentation électrique:15 hp
tr/min:10,000 RPM
# ATC:21
Cône:BT 30
environ5 heures il ya |
Date postale
environ5 heures il ya

I'm looking for a SULLAIR #LS-20T #Rotary Screw & Sliding Vane Air Compressors, but am open to other manufacturers and models.

Alimentation électrique:400 hp
Florida
environ5 heures il ya |
Date postale
environ5 heures il ya
Florida

wa whitney 791-000x 12 1/2" throat portable press any condition

Illinois
environ9 heures il ya |
Date postale
environ9 heures il ya
Illinois

wa whitney 650 duplicator with pc-800 control

Illinois
environ9 heures il ya |
Date postale
environ9 heures il ya
Illinois

Soudure Longueur:50.866"
Diamètre Min:4.252"
Michigan
environ9 heures il ya |
Date postale
environ9 heures il ya
Michigan

We are looking for a very large rotary tilting table with a load capacity of up to 120 tons. The most important factors are the load capacity of 100-150 tons and that the table can be swivelled 180°.

New York
environ9 heures il ya |
Date postale
environ9 heures il ya
New York

Looking: Haas VF-7 Vertical Machining Center West Coast preferred

X:84"
Y:32"
Z:30"
Alimentation électrique:20 hp
tr/min:7,500 RPM
# ATC:24
Tableau-W:28"
Table-L:84"
Cône:CAT-40
California
environ10 heures il ya |
Date postale
environ10 heures il ya
California

I need machinery to produce fuses for automotive uses.

environ10 heures il ya |
Date postale
environ10 heures il ya

I'm looking for a ACER #DYNAMIC 1440G #Engine Lathes, but am open to other manufacturers and models.

Diamètre admissible:14"
Centres:40"
Alésage broche:1.5625"
Alimentation électrique:3 hp
tr/min:2,000 RPM
Diamètre admissibleau-dessus de la glissère transversale:9"
Minnesota
environ11 heures il ya |
Date postale
environ11 heures il ya
Minnesota

I’m a plumbing contractor bidding on a project that is asking me to provide the 4030 ENG, so I am trying to get a price on the machine to add to my quote!

Pression maximale:3,000 PSI
Moteur:8 hp
Utah
environ12 heures il ya |
Date postale
environ12 heures il ya
Utah

I'm looking for a OMAX #2626 #Waterjet Cutters, but am open to other manufacturers and models.

Débit de la pompe au réservoir:60,000 PSI
X:29.016"
Y:25.984"
Z:8"
Taille de la table-W:30.984"
Taille de la table-L:45.984"
Alimentation électrique:100 hp
Texas
environ12 heures il ya |
Date postale
environ12 heures il ya
Texas

Just looking for pricing and avalibility.

Capacité de perçage (min):0.0394"
Capacité de perçage (max):0.5709"
Idaho
environ13 heures il ya |
Date postale
environ13 heures il ya
Idaho

looking for a kingston 2690 and a kingston 2290.

Louisiana
environ14 heures il ya |
Date postale
environ14 heures il ya
Louisiana

We are urgently looking for the CNC Roll Lathes from turning diameter 1000-1500mm and turning length from 4000mm to 8000mm. If you have any such machines, please send your offer asap.

environ14 heures il ya |
Date postale
environ14 heures il ya

I'm looking for a LINCOLN ELECTRIC #PYTHON X #Structural Steel Burning Systems, but am open to other manufacturers and models.

environ14 heures il ya |
Date postale
environ14 heures il ya

I'm looking for a SAMSUNG #SL-35A/1500 #CNC Lathes, but am open to other manufacturers and models.

Taille mandrin:15"
Capacité de la barre:4.63"
# Axe:2
Alimentation électrique:30 hp
RPM Max:2,000 RPM
Diamètre admissible:23.62"
Usinage Longueur:60.2"
New York
environ14 heures il ya |
Date postale
environ14 heures il ya
New York

please email quote asap

Capacité de la barre:8"
# Axe:2
Alimentation électrique:60 hp
RPM Max:1,500 RPM
Dia. tournage:27.5"
Diamètre admissible:35.4"
Usinage Longueur:120"
Contre-poupée:Yes
Texas
environ14 heures il ya |
Date postale
environ14 heures il ya
Texas

72" VTL

Dia.Table:72"
Diamètre admissible:74"
Pièce hauteur-U/R:67"
Alimentation électrique:75 hp
tr/min:156 RPM
Texas
environ14 heures il ya |
Date postale
environ14 heures il ya
Texas

I'm looking for a KING #72 #Vertical Boring Mills (incld VTL), but am open to other manufacturers and models.

Dia.Table:72"
Diamètre admissible:78"
Pièce hauteur-U/R:62"
Alimentation électrique:50 hp
tr/min:45.5 RPM
Texas
environ14 heures il ya |
Date postale
environ14 heures il ya
Texas

I'm looking for a second hand one

Epaisseur maxi:0.0591"
Longueur hors tout:10.17'
environ15 heures il ya |
Date postale
environ15 heures il ya

I would like to request a quote. I am using Taylor Winfield's MKII-5 model. I would like to recommend a new model with similar specifications and receive a quote.

Alimentation électrique:100 kw
environ16 heures il ya |
Date postale
environ16 heures il ya

Please send a quote for this equipment

Zone de marquage (X):3.1496"
Zone de marquage (Y):3.1496"
environ16 heures il ya |
Date postale
environ16 heures il ya

Diamètre alésage:13.78"
environ16 heures il ya |
Date postale
environ16 heures il ya

I am looking for a 5-inch cnc with a 4000mm X; Cnc ideally Fanuc. If you have any machine with these characteristics, you can feel great details.

X:157.5"
Y:78.7"
Z:55.1"
# Axe:5
Cône:HSK-63
environ16 heures il ya |
Date postale
environ16 heures il ya

environ16 heures il ya |
Date postale
environ16 heures il ya

Kindly share quote for Manual Milling Machine (M1TR) consisting below mention machine specification. 1. Auto feed. 2. ⁠Coolant Tank. 3. ⁠Degree Attachment. 4. ⁠Universal M1TR Vertical & Side. 5. ⁠Bed Size 1000 x 400. 6. ⁠TRO Digital Display.

environ16 heures il ya |
Date postale
environ16 heures il ya

Please note we need a new roll grinding machine for one of our client dealing in cold rolling & galvanizing steel industry. Details can not be shared here as it contains a large data. Kindly revert back on the mentioned below email id for further…

environ16 heures il ya |
Date postale
environ16 heures il ya

QUOTE FOR 1 PCS HORIZONTAL BAND SAW. BRAND ACRA MACHINERY MODEL BS 250V. WITH STANDARD ACCESSORIES. ELECTRICAL REQUIREMENTS: 440V AC/3 PH / 60HZ.

Cap rect (H):10"
Cap rect (P):15"
Couvercle rond:10"
Alimentation électrique:2 hp
Largeur de lame:1"
Epaisseur de lame:0.35"
Longueur de lame:135"
environ16 heures il ya |
Date postale
environ16 heures il ya

Need Rivetting machine similar make is also fine .

environ16 heures il ya |
Date postale
environ16 heures il ya

Interested on purchhasing this machine, i need price info

X:19.7"
Y:13.8"
Z:10.1"
Auto filetage (Oui/Non):Yes
Immergé(Oui/Non):Yes
environ16 heures il ya |
Date postale
environ16 heures il ya

Interested in price for this machine

X:13.8"
Y:9.8"
Z:10.1"
Auto filetage (Oui/Non):Yes
Immergé(Oui/Non):Yes
environ16 heures il ya |
Date postale
environ16 heures il ya

Please quote your firm price

environ16 heures il ya |
Date postale
environ16 heures il ya

I'm interested in the Victor JF-2VS you have available. I was curious what delivery would be to Batavia, NY 14020?

Tableau-W:9"
Table-L:49"
Course longitudinale:35"
Course transversale:12"
Alimentation électrique:3 hp
tr/min:60 RPM
Cône:R8
New York
environ16 heures il ya |
Date postale
environ16 heures il ya
New York

Various pneumatic tools

Alimentation électrique:20.8 hp
Air libre:50 ft³/min.
Pennsylvania
environ16 heures il ya |
Date postale
environ16 heures il ya
Pennsylvania

I’m writing you to inquiry the budgetary quotation for Steam Cleaner EN-Series model EN0.8S250-50 380/3/50. Appreciate if you find a time to assist with our request.

Pression maximale:250 PSI
Moteur:1 hp
Balkan
environ16 heures il ya |
Date postale
environ16 heures il ya
Balkan

I’m writing you to inquiry the budgetary quotation for Steam Cleaner Explosion Proof Rated EN-Series model EN0.8S250-50XP 380/3/50. Appreciate if you find a time to assist with our request.

Pression maximale:250 PSI
Moteur:1 hp
environ16 heures il ya |
Date postale
environ16 heures il ya

Price

environ16 heures il ya |
Date postale
environ16 heures il ya

Feeler 23A

X:22.835"
Y:16.535"
Z:20.079"
Alimentation électrique:14.8 hp
tr/min:10,000 RPM
# ATC:18
Tableau-W:16.535"
Table-L:25.591"
Cône:7/24 #40
# Axe:3
environ16 heures il ya |
Date postale
environ16 heures il ya

Please send us lowest offer For Honing machine .

Dia mandrin (min):0.06"
Dia mandrin (max):6.5"
(Min):0.236"
Course (max):6.7"
environ16 heures il ya |
Date postale
environ16 heures il ya

Digital Spring Testers

environ16 heures il ya |
Date postale
environ16 heures il ya

used folder

Epaisseur maxi:0.157"
Longueur hors tout:127"
environ16 heures il ya |
Date postale
environ16 heures il ya

I would like to know the price of the new machine, please.

Tonnage:8 T
environ16 heures il ya |
Date postale
environ16 heures il ya

I'm interested in acquiring two of the DELTA 50-871 in the 1200 cfm model.

Débit:1,200 ft³/min.
Alimentation électrique:0.2 hp
Pennsylvania
environ16 heures il ya |
Date postale
environ16 heures il ya
Pennsylvania

We are interested in buying two units spindle cooler from 10000 to 12000 btu

environ16 heures il ya |
Date postale
environ16 heures il ya

We are looking to roll out an entire jamb program and are looking at all options available to be prepared.

Tableau-W:7.5"
Table-L:96"
Mississippi
environ16 heures il ya |
Date postale
environ16 heures il ya
Mississippi

Requesting a quote for this model saw.

Cap rect (H):10"
Cap rect (P):16"
Couvercle rond:10.75"
Alimentation électrique:2 hp
Type (Auto, Manual, Semi):Manual
Largeur de lame:1"
Epaisseur de lame:0.035"
Longueur de lame:158"
North Carolina
environ16 heures il ya |
Date postale
environ16 heures il ya
North Carolina

Respected ma'am/sir, I am writing this mail regarding our requirement of double column vmc machine. Specification: X axis : 4200 Y axis : 2200 Z axis : 1000 Between column space must be not less thn 2500 BT 50.

X:157.48"
Y:106.3"
Z:31.496"
tr/min:10,000 RPM
Tableau-W:98.425"
Table-L:157.48"
# ATC:40
environ17 heures il ya |
Date postale
environ17 heures il ya