ACCUWAY UT-300LX
ACCUWAY (2012) UT-300LX CNC slant bed turning center with FANUC 0i-TD CNC control, 22” 3-jaw pneumatic chuck, 24” swing over bed, 20” max. turning diameter, 66” max. turning length, 4” spindle bore...
AMERA SEIKI T-312-30"
T-312-750, 3.5 bar, 12 chucks, 30hp, 3400rpm, 30.31 Maximum work length, 17.7 max turn dia.23.6 max swing, 12 tool Turret, programmable tail stock, chip conveyor, BF interface, Fanuc 0i-TD control,...
BOEHRINGER DUS 560 TI
400 V, 50 Hz Nominal current 63 A Displacement travel face slide 345 mm, top support 125 mm Centre height above flat track 280 mm Bed width 360 mm, bed slide guide length 520 mm Facing slide 6...
CHEVALIER FCL-2460
2 Axis Design, Rated Capacity 18” Diameter x 60” Turn Length, X-Axis Travel 12.2”, Z-Axis Travel 59', Swing Over Bed 24”, Swing Over Cross Slide 14.5”, 3 Jaw Chuck Diameter 12”, Max. Spindle Speed ...
CHEVALIER FCL-2580
CNC Lathe
CINCINNATI MILACRON AVENGER 250T
2 Axis, 8" Chuck, Tool Presettter, 850SX CNC
DAEWOO PUMA 12L
Daewoo Puma 12L
DAEWOO PUMA 300L
3.5" Bore, Fanuc 21, Steady Rest
DAEWOO PUMA 300LB
2000 Daewoo Puma 300LB CNC Lathe, used, equipped with Fanuc 21i-T Control, 1467 hours run time, and Turbo Chip Conveyor. Specifications: 23" swing, 51.1" machining length, 2-axis, 10" chuck, 4" bar...
DMC DL 30L
83" Centers, 3.54" Bar Capacity, 12" Chuck/ 15" Chuck , Fanuc 0i-TF
DMC DL 30L
Fanuc 0i-TF CNC Control 24" Swing x 82" Center Distance Tool Presetter & Tailstock Installed in 2,021 - 461 Cutting Hours
DMG MORI CTX 510 ECOLINE
CNC controller: SINUMERIK 810D with ShopTurn Capacity X-axis travel mm: 300 Z-axis travel mm: 1.050 Turning length mm: 1.050 Max. turning diameter mm: ø 465 Swing over bed mm: ø 680 Swing over cros...
DOOSAN LYNX 2100LB
Our company directly owns the machines. We have five showrooms in Korea, where we check all the issues with the machines, repair them, and then sell them. You can purchase with confidence. We alway...
DOOSAN LYNX 2100LB
Doosan Lynx 2100LB CNC Lathe, Hydraulic Tailstock, Multi-Stage Coolant Pump, Programmable Part Catcher, Tool Presetter, Tool Load Monitoring System
DOOSAN LYNX 300
DOOSAN LYNX 300 CNC TURNING CENTER
DOOSAN LYNX 300
Doosan Lynx 300 CNC Lathe, 2012-Fanuc Control,Chip Conveyor,Tool Presetter,Tailstock,Parts Catcher
DOOSAN LYNX 300
2 Axis, Slant Bed
DOOSAN PUMA GT2600L
Our company directly owns the machines. We have five showrooms in Korea, where we check all the issues with the machines, repair them, and then sell them. You can purchase with confidence. We alway...
ECOCA MT-310MC/1000
2012 Ecoca MT-310MC 1000 CNC Lathe, Live Tooling, C-Axis, Hydraulic Chuck, Hydraulic Tailstock, Filtreomax Air Filter, Chip Conveyor, Tool Presetter, Live Center,
FEELER FTC-200L
Feeler FTC-200L Turning Center 2011 Fanuc Series Oi-TD Control, 4500RPM, 2-Axis, s/n TGL192, 2011 - , 12 Position Turret, Tailstock, Swing 23.6" Machining Length 26" Chuck Size ...
GILDEMEISTER NEF 600
HAAS SL-20
CNC Lathe
HAAS SL-20
Haas SL-20 CNC Lathe, 1999
HAAS SL-20T
Haas SL-20T CNC Turning Center with 3-Jaw Chuck, Tailstock, Chip Auger, Coolant System Stock: 7124 Manufacturer: Haas Model: SL-20 Age: 2005 CONTROL: HAAS 32 BIT CNC CONTROL MAX TURNING DIAMETER: 1...
HAAS SL-20T
2007 Haas SL20T CNC Turning Center with Programmable Tailstock. Machine is in very good condition and can be viewed under power as needed.
HAAS SL-20T
CNC Lathe
HAAS SL-20T
Full C Axis, Live Tool, Haas Servo 300 Bar feed, tailstock, chip conveyor, collet chuck, parts catcher.
HAAS SL-20T
For sale: 2008 HAAS SL-20T CNC Lathe. Key Specs: 23" swing, 24" machining length, 2-axis, 8" chuck, 20 hp, 4,000 RPM max. Includes chip auger, tool presetter, tailstock, and more. Used but robust.
HAAS SL-20T
CNC Lathe
HAAS SL-20T
Haas SL-20T 2-Axis CNC Turning Center with Tailstock, Tool Presetter, 2001 Manufacturer: Haas Model: SL-20T Age: 2001 CONTROL: HAAS CNC CONTROL MAX TURNING DIAMETER: 10.3" MAX TURNING LENGTH: 20" ...
HAAS SL-20T
Haas SL-20T CNC Lathe
HAAS ST-10
CNC Lathe
HAAS ST-10
CNC Lathe
HAAS ST-10
HAAS ST-10 CNC LATHE NEW: 2011| JL 85514
HAAS ST-10
HAAS ST10 CNC Lathe 2011 Specs: Bar Capacity: 1.75" Chuck Size: 6.5" Spindle Speed: 6,000 RPM Spindle Motor: 15 HP X Axis Travel: 7.88" Z Axis Travel: 16" Rapid Rate Z Axis: 1,200 IPM Turret Tools:...
HAAS ST-10
2020 Haas ST-10 CNC Lathe, 6.5" Hydraulic Chuck, Chip Conveyor, Parts Catcher, Rigid Tapping
HAAS ST-10
Haas ST-10 CNC Lathe, 2022 – Chip Conveyor, Low Hours
HAAS ST-10
TRAVELS: X-AXIS: 7.88" Z-AXIS: 14" RAPID TRAVERSE: 1200 IPM X + Z CHUCK SIZE: 6.5" SWING OVER BED: 16.25" MAXIMUM TURNING DIAMETER: 14" MAXIMUM TURNING LENGTH: 14" BAR CAPACITY: 1.75" SPI...
HAAS ST-10
HAAS ST-10 CNC Lathe w/ Bar Feeder (2013)
HAAS ST-10T
Very low hours 2011 HAAS ST-10T with all the options you would want including a tailstock, tool presetter, chip conveyor and parts catcher. Coming out of a small manufacturing company with their ow...