D-HONER DS-60
Our SUPERFINISHING MACHINE (LATHE MOUNTED) is offered under the model D-HONER DS-60. It is pneumatically operated and the super finishing unit is mounted on the tool post of any lathe. The machine ...
D-HONER DS-60X2
Our super finishing machine (lathe mounted) is offered under the model d-honer ds-60x2. It is pneumatically operated and the super finishing unit is mounted on the tool post of any lathe. The machi...
GRIND MASTER SMP 500E
Admit Between Centre 500 mm International Built Standard Optional – GSF Size Control Technology Expandable to Multiple Stations with Automation
IMPCO 1140-XE
The IMPCO Model 1140XT Roller Drive Microfinishing machines are compact, economical and easy to use - cost effectively achieving low, medium and high volume Microfinishing for a wide range of cylin...
IMPCO 1140-XT
The IMPCO Model 1140XT Roller Drive Microfinishing machines are compact, economical and easy to use - cost effectively achieving low, medium and high volume Microfinishing for a wide range of cylin...
IMPCO 1340-XT
The cost effective Worldstar 1340 is a truly metric machine design series to meet world class requirements throughout the industrial world. The new range of IMPCO modular-design Microfinishing syst...
IMPCO 1440-XE
Available single and dual-spindle designs to meet your production requirements. Modular design ideal for flexible cell operation, accommodates wide range of plant layout and capacity demands. Elect...
IMPCO 1440-XT
Available single and dual-spindle designs to meet your production requirements. Modular design ideal for flexible cell operation, accommodates wide range of plant layout and capacity demands. Elect...
IMPCO 1540-XE
Operator convenience was a key design criterion for the Worldstar 1540/1640 Series. All system tooling maintenance is accomplished from a single location at the front of the machine. Microfinishing...
IMPCO 1540-XT
Operator convenience was a key design criterion for the Worldstar 1540/1640 Series. All system tooling maintenance is accomplished from a single location at the front of the machine. Microfinishing...
IMPCO 1640-XE
Operator convenience was a key design criterion for the Worldstar 1540/1640 Series. All system tooling maintenance is accomplished from a single location at the front of the machine. Microfinishing...
IMPCO 1640-XT
Operator convenience was a key design criterion for the Worldstar 1540/1640 Series. All system tooling maintenance is accomplished from a single location at the front of the machine. Microfinishing...
IMPCO 940-XE
Metric horizontal single spindle machine for small shafts and crankshafts - finishing arms are manually advanced and traversed laterally.
LAPMASTER 1200 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER 500 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER 850 G
Lapmaster International presents a full line of single side fine grinding systems with fine grinding wheel sizes ranging from 500 mm diameter to 1200 mm diameter. Fine grinding produces flat parts ...
LAPMASTER DSG 720
The Lapmaster DSG dual-face fine grinding machine utilizes a 3-way planetary system to generate precise and repeatable results at an economical price. Excellent results are obtained processing a wi...
LOESER HSF 4000
LOESER HSF 8000
MANISHA MHA 400
The wide scope of the Superfinishing method is founded on its economic operation, its cleanliness and the extraordinary results achieved in improving surface quality and shape. Surface roughness v...
MANISHA MHA 500
The wide scope of the Superfinishing method is founded on its economic operation, its cleanliness and the extraordinary results achieved in improving surface quality and shape. Surface roughness v...
NAGEL SCD-200
Nagel SCD centerless through feed superfinishers are used for cylindrical round parts such as bearings, shock absorber shafts, piston pin, track pin, etc. The machines can be tied to a centerless t...
NAGEL SCD-80
Nagel SCD centerless through feed superfinishers are used for cylindrical round parts such as bearings, shock absorber shafts, piston pin, track pin, etc. The machines can be tied to a centerless t...
NAGEL SCE
Nagel SCE superfinishers are used to finish tapered journals and other cylindrical parts that cannot be fed in a through feed machine. Parts can be driven between centers or centerless between roll...
NAGEL SPH 150
The Nagel Vertical Spindle Machine type SPV 150 and Horizontal Spindle Machine type SPH 150 Cup Wheel Face Finishers are designed to finish flat, concave and convex surfaces. Cup wheel Face Finishe...
NAGEL SPV 150
The Nagel Vertical Spindle Machine type SPV 150 and Horizontal Spindle Machine type SPH 150 Cup Wheel Face Finishers are designed to finish flat, concave and convex surfaces. Cup wheel Face Finishe...
NAGEL TF4
Nagel TF4 tape finishers are used to primarily finish journals, faces and tapered surfaces. Parts commonly finished with the technology includes, Crankshafts, Balance Shafts, Cam Shafts, Transmissi...
SUPFINA 807 D4F2 NC
SUPFINA 813
SUPFINA 814
SUPFINA BALLFLEX 728
The Supfina BallFlex 728 is a versatile, high-precision ball finishing machine offering both between centers and centerless clamping options. It is available for spherical workpieces up to 800 mm i...
SUPFINA CENFLEX 1
Whether for limited prototype production or for a full-scale run of workpieces, the Supfina CenFlex 1 is your highly reliable, economical, and efficient answer. Depending on the application, setup...
SUPFINA CENFLEX 2
Whether for limited prototype production or for a full-scale run of workpieces, the Supfina CenFlex 2 is your highly reliable, economical, and efficient answer. Depending on the application, setup...
SUPFINA CENPRO
The Supfina CenPro is designed to finish various crankshafts and camshafts with the units horizontally arranged. Workpieces are loaded by gantry directly onto V-prisms between the tailstock and he...
SUPFINA LEANCOSTMACHINE
Supfina’s new LeanCostMachine® offers optimal versatility for superfinishing small and medium-size runs of parts — economically and flexibly. Its modular system — equipped with state-of-the-art tec...
SUPFINA MULTIFLEX
SUPFINA MULTITOOL
The MultiTool is designed to superfinish small shafts up to 700 mm long (between centers), especially camshafts, gear shafts, balancing shafts, and even eccentric shafts. Depending on the customer...
SUPFINA RACE 705
SUPFINA RACE 707
SUPFINA RACE 715
SUPFINA RACE 717
SUPFINA RACEFLEX 725
The Supfina RaceFlex 725-727 is designed to achieve consistent top quality and highest flexibility in Superfinishing Aeroengine bearings, prototypes or other small production batches. Unmatched ver...
SUPFINA RACEFLEX 727
The Supfina RaceFlex 725-727 is designed to achieve consistent top quality and highest flexibility in Superfinishing Aeroengine bearings, prototypes or other small production batches. Unmatched ver...
SUPFINA RACEPRO 725
The Supfina 725 combines the well-established vertical arrangement of the workpiece spindles with Superfinishing units optimized for the various machining operations around cylindrical and taper ro...