立式加工中心(五軸或更多軸)STAMA MC 535 SM
德國總覽
參數改為公制
X軸行程 | 31.496" |
Y軸行程 | 19.685" |
Z軸行程 | 20.079" |
軸數 | 5 |
主軸轉速 | 10,000 RPM |
控制系統 | 數控 (Fanuc 16 iM) |
配備
· CNC-Continuous path control FANUC Type 16 iM, for all 5 axes including monitor display and direct in-put and various sub-programs, tool corrections, tool monitoring, parallel programming, 3-D and helicoid interpolation, and various other equipment
· Bar feeding magazine on the left side of machine up to 10 bars of Ø 80mm,
· mounted CNC-Turning-Swivelling system including clamping device for take up of bar materials in connection with hydr. tailstock as center support ,
automatic tool magazine including 66 tool positions, Ø 125 x 300 long, tools also
with internal coolant supply, including own tool data base, chip to chip time 4 sec.
Controlling of tool breakage via laser-light barrier, etc.
· Grip and swivel device for holding the workpiece while cut-off-milling as well as for extracting the finished part and placing it on the conveyor belt
· Complete enclosure of work area including chip conveyor, however without coolant facility (central cooling supply)
Probe sensor control for scanning workpieces possible, watercooled milling spindle, various collets,
no tools available
規格表
Bar-Ø/profile size x maximum length 80 x 800 mm (!)
Longitudinal travelling range X-axis 800 mm
Transverse travelling range Y-axis 500 mm
Vertical range of milling heads Z-axis 510 mm
work piece axis turning/swiveling 360°/120 °
Daylight underneath vertical spindle approx. 350 mm
Spindle taper 63 hollow shank tapers
Speed in rpm of spindle infinitely adjustable 36.-.10.000 rpm
Feed of all 3 axes 1 - 10.000 mm/min
Rapid feed 40.000 mm/min
Spindle drive 22 bis 32 kW
Total electrical load 60 kW - 380 V - 50 Hz
Weight approx. 10 to
查看此類型更多的產品
VISION WIDE FA-5233
立式加工中心(五軸或更多軸)
SHARP SVX-500
立式加工中心(五軸或更多軸)
HENRI LINE GICAMILL
立式加工中心(五軸或更多軸)
SNK HPS-120B
立式加工中心(五軸或更多軸)
查看此品牌更多的產品
STAMA MC534
立式加工中心
STAMA MC 533
立式加工中心(五軸或更多軸)