AKIRA SEIKI SL-15
Used 2009 Akira-Seiki Model SL15 Performa, 2-Axis CNC Lathe, 7500 RPM Notes: This AKIRA-SEIKI SL15 was purchased new in 2009 and has been well maintained by original owner ever since. The seller’s...
CINCINNATI MILACRON HAWK 150
Make: Cincinnati Milacron Model: Hawk 150 ERD Serial No: 7051-F00-98-0168 Year New: 1998 Hours: 31,000 Power On Cutting time: 5641 Hours! Condition: Used, Overall in Excellent Shape • Machine is ...
CLAUSING COLCHESTER STORM 80
2 Axis Slant Bed, 6" Chick, Fanuc 21T CNC
DAEWOO LYNX 200
Daewoo Lynx 200 CNC Lathe, 1998 – Mitsubishi Control, Tailstock
DOOSAN DAEWOO LYNX 200A
DAEWOO DOOSAN LYNX 200B CNC TURNING CENTER, Fanuc 21i-T CNC Control, 6.5" 3-Jaw Chuck, 18.11" Swing, 11.02" Between Centers, 11.81" Max Turning Length, 10 HP, 5000 RPM, 12-Position Turret, Tool Set...
FEMCO HL-25
Femco HL-25 CNC Lathe, 2008 – Fanuc Control, Tailstock, Chip Conveyor
FUJI ANS-31P
Fuji ANS-31P, Fanuc 18i-LNB CNC, 16/5" Swing, 8" Chuck, Tool Probe, Part Probe, 8-Position Turret, New 2008, 2 Available.
FUJI HM-30T1
FUJI HM-30T1 SINGLE SPINDLE CNC LATHE W/GANTRY & MILLING
FUJI TN-35TL
Fuji TN-35TL CNC Lathe, 2004 – Fanuc 21i-T Control, Robotic Gantry Loader and 12 Pallet Load Station, Chip Conveyor
HAAS SL-10
Lot 20: Haas SL-10 CNC Turning Center with Haas CNC Control, 6" 3-Jaw Chuck, Collet Chuck, Tool Pre-setter, Tailstock, Chip Auger, LESS THAN 1100 HOURS! Equipped With: Haas CNC Control, 6" 3-Jaw C...
HAAS SL-10
HAAS SL-10 CNC TURNING CENTER, Haas CNC Control, Royal Collet Chuck, 16.25" Swing, 14" Max Turning Length, 1.5" Bar Capacity, 2.31" Spindle Bore, 15 HP, 6000 RPM, 12-Position Turret, Tool Setter, S...
HAAS SL-10T
HAAS SL-10T 2-AXIS CNC LATHEHAAS SL-10T 2-AXIS CNC LATHE
HARDINGE TALENT 6/45 SV-150
Still in original paint and in excellent condition! Hours: 78,025 - On 4,517 - Cut
HARRISON ALPHA 400 PLUS
This is a great CNC Lathe for everyone.
HITACHI SEIKI HVP23J
17.7" Swing 24.8" Centers Hitachi-Seiki HVP-23J CNC LATHE, PARTS MACHINE
KENT USA CRL-1640
10 HP Peak Fagor Servo Spindle motor Manual and CNC mode Rigid Meehanite castings with extra ribbing Induction hardened and ground ways 2 speed semi-automatic gearbox with alloy steel gears that ar...
MAZAK QT-20N
10" Chuck, 2 Axis, Slant Bed, 8 Position Turret, Mazatrol CAM T-2 CNC
MAZAK QUICK TURN 15N
Mazak Quick Turn 15N CNC Lathe, 1989 – Chip Conveyor
MAZAK QUICK TURN 15N
8" Chuck, Tailstock, Tool Presetter, Mazatrol T plus CNC Control
MAZAK QUICK TURN 20
Mazak Model Quick Turn 20 CNC Turning Center, New 1997, Mazatrol T-Plus CNC Control, 2" Capacity, 11.81" Max. Turning Diameter, 20.15" Max. Turning Length, 8" 3-Jaw Chuck, $7,950.00 F.O.B. Day...
MIGHTY VIPER VT-17L
Fanuc 0iTC Control, 8" 3 Jaws Hydraulic Chuck, Max Turning Diameter 15.3", Length 14.6", Through Bar Capacity 2.04", X: 8.5", Z: 18.5", 15HP, 5000RPM, Tool Setter, Parts Catcher, Mist Collector, an...
MILLTRONICS ML18
This is a great CNC lathe that can be seen under power at our facility in Louisville, KY.
MORI SEIKI RL-203
2001 MORI SEIKI RL-203 CNC Twin-Spindle Turning Center with Overhead Gantry Loader System And All Options Fully Installed for Inspection & Testing. FEATURES: MORI MSG 803 MAPPS CNC Conv. CONTROL ...
NAKAMURA-TOME TMC-18
NAKAMURA-TOME, #TMC-18, Fanuc 21-T control, 10 HP, 4500 rpm, 1998
NARDINI FAST TRACE
*** WE TAKE TRADES | 17.5" x 40" Nardini Fast Trace CNC lathe; GE Fanuc 20T CNC Control with Teach Mode; DNC USB conversion; 3-jaw chuck w/jaws; Dorian quick change tool post holder; Royal quick ch...
OKUMA GENOS L250E
Okuma Genos L250E-EX 500 Horizontal CNC Lathe 2017 equipped with 8" Chuck, 2.5" Bar Cap, Parts Catcher, Tool Pre-setter, Chip Conveyor.
OKUMA LB15
Okuma LB15 CNC Turning Center with chip conveyor, New in 1997. Video is available upon request