X axis 762 mm
Y axis 550 mm
Z axis 650 mm
Spindle nose to table 162-812 (BT40), 127-777 (BT50) mm
Spindle to column 725 mm
Work table size 610×900 mm
T-slot 5-18×100×125 mm
Max. loading capacity 800 kg
Rapid moving speed (X/Y/Z) 24000 mm/min
Feeding speed (X/Y/Z) 3-20000 mm/min
Speed 60-7000 (10000), 60-6000 (BT50) rpm
Taper 7:24 No.40
Diameter φ70 mm
Torque 114.6 Nm
Power 9-11 Kw
Capacity 24 (BT40)/24 (BT50) pcs
Time 2-3 sec.
Max. tool dia. 80/127 mm
Max. tool dia. w/o tool on side 125/200 mm
Max. tool length 300 mm
Max. single tool length 8-15 kg
Tool magazine loading capacity 120/192 kg
Full loading current 100 A
Compressed air pressure 0.6 mpa
Electric power 380(1±10%)V 50HZ
Overall size (L/W) 3250×3120 mm
Floor space 4938×3521 mm
Height 3139 mm
Net weight 8000 kg
CNC System FANUC
Features and Application
-- Bed Type structure with fixed column
-- X and Y Axis go through cross moving table
-- Each linear motion axis use imported rectilinear rolling guide, ball screw and
-- Enlarge the span of guideway on Y axis furthest, eliminate the gravity tips during
X axis moving, so that ensure the stability and rigidity of machine;
-- The column is herringbone to enlarge the section size, and ensures the
construction and combination rigidity.
-- ATC system is fixed on the column, realizing automatic tool change.
-- High quality specialized bearings are used to main spindle, and all components
of spindle are no rotation vibration after strict motion balance. Tool storage uses
steel ball collet and disk spring to get tools tied and untied. Pulling force is from
disk spring. Unclamping force is from cylinder.
-- The synchronous dentiform belt is transferred between spindle and motor, the
transmission ratio is 1:1;
-- Various combination of shanks and rivets can be used to spindle
-- The guide way and ball screw are lubricated automatically by thin oil;
-- Two automatic chips conveyor, interior and exterior and are applied. Interior
screw chip conveyor, which makes machine body structure reasonable and
ensures construction rigid. Exterior chip conveyor is raddle type placed in the
rear part of machine.
-- The machine surface is equipped with closed protective cover with cocoon and
dual-door. Stainless steel shield are used on all guideways.
-- Two electric cabinets are combined with main body of machine as one,
unnecessary to disassemble during transportation or installation.
-- Modularization structure design guarantees flexible configuration with kinds of
-- Various sensor, closed loop control laser scale and rotary table can be installed
BV55 serious vertical machining centers use CNC system provided by professional
suppliers. Each linear motion axis, spindle as well as additional rotation axes are
driven by servo motors, 3-axis ganged, milling, boring, drilling and rigid threading,
which is suitable for light and general processing. Digital precision positioning can be
achieved. With motion axes plugging and ganged, processing large screw and
curved surface can be realized. Various working procedure of rough and précised
machining can be achieved with one-time clamp on the same machine tool.
Meanwhile, multiple typical cycle program is installed in the NC system as options
during processing. Pre-set program controls cutting, coolant supply, and tool change,
etc. In the process of tool change, air will be blown from spindle center automatically
to keep shank and taper-bore clean. Clips produced by cutting can be cleaned to the
chip collecting cart through interior and exterior chip conveyor.
BMEIMT originated from Capital Primary Industrial School (1907), Beijing No. 6 machine tool company (1978) and Beijing mechanical & electrical research institute (1978). BMEIMT is restructured into BMEI. In order to satisfy the demand market and strategic integration of our group company, the machine tool division separated from BMEI and built the new company, BMEIMT.
BMEIMT are mainly engaged in developing and producing five-axis turbine blade/wheel machining center, three/four-axis vertical machining center, drilling center, grinding machine and costumed machine. Based on the mature technique of popular-type machines, BMEIMT now has built the advantage of high-end products, which are five-axis machine tool, direct-driven machining center and five-sides machining center. BMEIMT has achieved the batch production and sales of the high-end products. Moreover, our company is the first company of developing 5-axis turbine blade machining center.
In order to be the technical innovative leader of machine tool subdivision field, BMEIMT takes the advantage of talents resources and high scientific research ability and insist on the continuously innovation of management system and technique.
Customer always is the key focus of our company. Sustainable Development and customer satisfaction is the eternal target. BMEIMT will keep developing new products and improving service, and build famous reputation.
Quality target: Honesty Innovation, Excellent Manufacture, Sincere Service, Customers First!