BMEIMT VMC850E

  • Specs
    Convert Specs to Metric
    X
    33.46 "
    Y
    20.08 "
    Z
    22.05 "
    Table-W
    22.83 "
    Table-L
    43.31 "
    Control
    CNC
  • Product Overview

    Item VMC850E
    Travel
    X axis 850 mm
    Y axis 510 mm
    Z axis 560 mm
    Spindle nose to table 150-710 mm
    Spindle to column 603.4 mm
    Work Table
    Work table size 580×1000 mm
    T-slot 3-18×200 mm
    Max. loading capacity 550 kg
    Feeding
    Rapid moving speed (X/Y/Z) 24000 mm/min
    Feeding speed (X/Y/Z) 3-15000 mm/min
    Spindle
    Speed 60-8000 rpm
    Taper 7:24 No.40
    Diameter φ70 mm
    Torque 35.8 Nm
    Power 7.5/11 Kw
    Tool Magazine
    Type ATC
    Capacity 24 pcs
    Time 1.8 sec.
    Max. tool dia. φ78 mm
    Max. tool dia. w/o tool on side φ150 mm
    Max. tool length 250 mm
    Max. single tool length 7 kg
    Tool magazine loading capacity 120 kg
    Power Source
    Full loading current 80 A
    Compressed air pressure 0.6 mpa
    Electric power 380(1±10%)V 50HZ
    Overall Size
    Overall size (L/W) 3282×2347 mm
    Floor space 4464×3280 mm
    Height 2878 mm
    Net weight 6000 kg
    CNC System FANUC

    Features:
    -- Bed Type structure with fixed column;
    -- X and Y Axis go through cross moving table;
    -- Each linear motion axis use imported rectilinear rolling guide ,ball screws and servo motor ,
    with semi closed loop control
    -- Disk type tool magazine is fixed on the colum ,realizing automatic tool change
    -- Closed protective cover with injected plastic on the surface is used. Stainless steel
    telescoping protective cover is used to protect each axis guide and ball screw
    -- Electric cabinet with dual door is connected with the main body of machine tool as a whole ,
    unnecessary to disassemble during transportation or installation
    -- Guide runs through X axis with slide plece fixed, which enlarges the space of Z axis and
    reduces the weight of moving parts through Y axis.
    -- Spindle used is the imported high-quality one. Its components are with no rotation vibration
    after strict motion balance. Tool storage uses steel ball collect and disk spring to get tools tied
    and untied . Pulling force is from disk spring .unclamping force is from cylinder.
    -- Spindle configuration can satisfy various combinations of shank and ingot puller
    -- Various feelers can be installed additionally.
    Application:
    E series Vertical Machining Centers use FANUC 0i MATE system. Each linear motion axis,
    spindle as well as additional rotation axes are driven by servo motors , 3-axis ganged, milling,
    boring , drilling ,rigid threading ect , which is suitable for light and general processing . Digital
    precision positioning can be achieved. With motion axes plugging and ganged , processing large
    screw and curved surface can be realized. Various working procedure of rough and précised
    machining can be achieved with one-time clam on the same machine tool . Meanwhile , mutiplie
    typical cycle programme is installed in the NC system as options during processing .Pre-set
    programme controls cutting , coolant supply , and tool change , etc. In the process of tool
    change ,air will be blown from spindle center automatically to keep shank and taper-bore clean .
    Clips produced by cutting can be cleaned manually to the clip collector.


    Model Brochure (89.7 KB)

  • About Company
    BMEIMT Co., Ltd.

    BMEIMT originated from Capital Primary Industrial School (1907), Beijing No. 6 machine tool company (1978) and Beijing mechanical & electrical research institute (1978). BMEIMT is restructured into BMEI. In order to satisfy the demand market and strategic integration of our group company, the machine tool division separated from BMEI and built the new company, BMEIMT. BMEIMT are mainly engaged in developing and producing five-axis turbine blade/wheel machining center, three/four-axis vertical machining center, drilling center, grinding machine and costumed machine. Based on the mature technique of popular-type machines, BMEIMT now has built the advantage of high-end products, which are five-axis machine tool, direct-driven machining center and five-sides machining center. BMEIMT has achieved the batch production and sales of the high-end products. Moreover, our company is the first company of developing 5-axis turbine blade machining center. In order to be the technical innovative leader of machine tool subdivision field, BMEIMT takes the advantage of talents resources and high scientific research ability and insist on the continuously innovation of management system and technique. Customer always is the key focus of our company. Sustainable Development and customer satisfaction is the eternal target. BMEIMT will keep developing new products and improving service, and build famous reputation. Quality target: Honesty Innovation, Excellent Manufacture, Sincere Service, Customers First!


Looking to Purchase a New BMEIMT VMC850E?